How much does it cost to replace wheel bearings on Subaru Impreza?
Subaru Impreza Wheel Bearings Replacement costs $380 on average. What are wheel bearings and how do they work? A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races.
What’s the cheapest way to change a wheel bearing?
This is also the cheapest way to change a press in bearing correctly, as the tools needed can be had for around $150. The car in this video is a 1993 Subaru Impreza. However, this procedure works for many cars from most brands. Especially smaller vehicles from Japanese manufacturers.
How do you change wheel bearings on a Toyota Tundra?
On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing. On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier.
How are wheel bearings removed from an Audi A6?
On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed. The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
Can a Subaru have a press in wheel bearing?
This feature is not available right now. Please try again later. Come along with Eric O. as he works on a Subaru with a press in rear wheel bearing. This job usually requires a lot of spray, new control arm bushings, a torch, a sawzall, and a lot of bad words. In this video we are gonna use BIG NASTY and do what needs doing!
Where is the brake caliper on a Subaru Forester?
Take the 32mm (or 1 1/4″) socket and a breaker bar and remove the axle nut, this will take some muscle Release the parking brake. Remove the brake caliper by taking out two 14mm bolts. These are the bolts with the heads towards the inside of the car, and pass through the backing plate. You can set the caliper behind the knuckle.
What are the wheel bearings for a Subaru Forester?
Buy or rent a slide hammer and a 100mm bolt circle axle puller adapter (Autozone PN 27037 works), and 2 nuts that fit the slide hammer threads Buy wheel bearings (highly recommend the newest Subaru bearings), the inner seal #1, the inner seal #2, and the outer seal, 2 lateral link lock nuts, and 3 open face (uncapped) lug nuts.