How much does it cost to replace spark plugs in a Honda Pilot?
The average cost for a Honda Pilot spark plug replacement is between $169 and $341. Labor costs are estimated between $96 and $121 while parts are priced between $74 and $221. This range is based on the number and age of Honda Pilot’s on the road.
How many spark plugs does a v6 Honda Pilot have?
There are 3 spark plugs situated on the front side of the engine and 3 on the back side. The spark plug ignition coils are held in place by a single nut.
When to change spark plugs in Honda Pilot?
How to check or change the spark plugs in the 3.5L VTEC V6 engine of a 1st generation 2003 to 2008 Honda Pilot. This automotive maintenance tutorial was specifically written to assist owners of the first generation (2003, 2004, 2005, 2006, 2007 and 2008) Honda Pilot SUV in checking or changing the spark plugs in the 3.5 liter VTEC V6 engine.
How are ignition coils held in place in Honda Pilot?
The ignition coils are held in place to the engine by a single 6mm hex head bolt. Push in the release tab on the electrical connector before sliding it straight off the ignition coil. Loosen the ignition coil bolt by turning it counterclockwise with a 6mm hex socket and a 1/4″ or 3/8″ drive ratchet. You can also use a 6mm Allen Key wrench.
Where are the spark plugs located on a Honda Accord?
There are 3 spark plugs situated on the front side of the engine and 3 on the back side. Loosen 10mm Nut. Spin Off 10mm Nut. 10mm Nut Removed. The spark plug ignition coils are held in place by a single nut. Loosen the nut in the counterclockwise direction with the 10mm socket and 1/4″ drive ratcheting wrench.
How to check or change the spark plugs in the 3.5L VTEC V6 engine of a 1st generation 2003 to 2008 Honda Pilot. This automotive maintenance tutorial was specifically written to assist owners of the first generation (2003, 2004, 2005, 2006, 2007 and 2008) Honda Pilot SUV in checking or changing the spark plugs in the 3.5 liter VTEC V6 engine.
The ignition coils are held in place to the engine by a single 6mm hex head bolt. Push in the release tab on the electrical connector before sliding it straight off the ignition coil. Loosen the ignition coil bolt by turning it counterclockwise with a 6mm hex socket and a 1/4″ or 3/8″ drive ratchet. You can also use a 6mm Allen Key wrench.
There are 3 spark plugs situated on the front side of the engine and 3 on the back side. Loosen 10mm Nut. Spin Off 10mm Nut. 10mm Nut Removed. The spark plug ignition coils are held in place by a single nut. Loosen the nut in the counterclockwise direction with the 10mm socket and 1/4″ drive ratcheting wrench.