How many quarts of oil does a E320 take?
8.5 quarts
8.5 quarts (with filter)On models with oil cooler, additional oil may be needed when cooler is drained. Allow 5 minutes after refilling or turning engine off before checking oil level.
What kind of oil does a Mercedes Benz E320 take?
5W-30 Pento High Performance is a fully synthetic high performance engine oil, developed for the most recent vehicles with extended oil service intervals.
How to change the oil in a Mercedes Benz E320?
Drain Oil – Set up the workspace, drain oil and replace plug 5. Find Oil Filter – Locate the oil filter 6. Remove Filter – Position drain pan and remove the oil filter 7. Replace Filter – Add oil to the new oil filter and insert it 8. Remove Oil Cap – Take off the oil fill cap 9.
What does the oil level sensor on an e320 do?
Part numbers related to the oil level sensor are shown below and there could be more. The purpose of the the oil level sensor (B40) is to measure the oil level but also oil temperature and the oil quality. This E320 was showing “Reduce oil level” warning in instrument cluster even though the oil level was correct.
How do you remove oil level sensor B40?
You will have to press the small tab on the connector and pull it out. Remove the bolts that hold the sensor in place using E-10 socket. Pull the oil level sensor down carefully. There may be some oil that will come out when you remove the oil level sensor B40.
How to change the engine oil level sensor on a Mercedes?
C240, C32 AMG, C320, C55 AMG, CLK320, CLK500, CLK55 AMG, CLS500, CLS55 AMG, YEARS: 2001, 2002, 2003, 2004, 2005, 2006, 2007. Manufacturer Part Number: 0 00 90 56201,0 06 15 32928,0 04 15 36628 Interchange Part Number: 006 153 29 28,0061532928,004 153 66 28,0041536628 802 33077 001 0061532928
Where can I buy an oil filter for a Mercedes?
The filter used by the dealerships can be found on Amazon for under $15 which is the Mann Fleece Oil Filter. This may be the biggest investment if you don’t have any of the following. Even if you were to purchase all these tools you will still spend less with on the first oil change than what you would at the shop.
What kind of oil do you use for a Mercedes Benz?
Some owners prefer to use an oil extractor such as the Mityvac 7400 7.3 Liter Fluid Evacuator to do their oil change. How to video using extractor provided below if you want to go that route. The manufacturer recommended oil, also used at Mercedes-Benz dealerships is the Mobil1 European Car 0W-40 Full Synthetic oil.
How do you do an oil change on a Mercedes Benz?
Locate the hood release handle on the interior on the driver’s side. Pull on the handle until you hear the hood release. Open the hood by pulling on the triangle shaped hood latch release. This opens in a new window. You can either use the jack that came with the car to raise the car.