How long does it take for spot putty to dry?
Unlike many 2-part putties which can require longer to dry, Bondo Glazing & Spot Putty is sandable in as little as 30 minutes. It is non-staining, so it won’t affect the color of paint or finishes around the repair area.
What is Spot putty used for?
Spot putty is another type of filler that is used to fill tiny pinholes in the body filler. If you don’t fill those pinholes, the filler might crack when there is any movement of the underlying metal. It is very easy to sand, dries fast and doesn’t need a hardener to cure. You can just apply it from the tube.
Can you put spot putty over bare metal?
Putty, like paint, adheres better and stays intact when applied to bare metal. So make sure you completely remove all oil, grime, solvent, rust, and paint from the surface. Before using auto putty be sure to use a Scotch-Brite pad to scuff the surface of primed metal to give the putty something to adhere to.
How do you use Kombi spot putty?
Application: Apply 1 – 3 coats, with a flash time of 15 minutes between coats at a temperature of 72ºF. Finishing: It requires a drying time of 20 minutes at 72ºF and 10 minutes at 100ºF. Topcoating: Can be top coated with primer, sealer, basecoat, primer sealer, and single stage refinish coatings.
Can you put putty over primer?
You can use glaze putty over primer. Either pin holes or lows or something that pops up after it’s been primed on occasion. Let me give you one hint to help you, and you may be doing this, but use a Guide Coat in your body filler stages.
Can Spot putty be applied over paint?
This spot and glazing putty is ideal for spot repairs and other small repairs to auto body panels. Use it for filling pinholes in body filler as well as for covering minor sand scratches, and more on metal, fiberglass and wood as well as sanded and primed or sanded and painted surfaces.
Can you put spot putty over primer?
Where do I use glazing putty?
Glazing putty is ideal for use as a filler to rectify the holes that result from nails and screws in walls, ceilings, and floors. The consistency of the substance means that it does not shrink and can leave a smooth surface that can be painted or covered over in another way.
How do you use sikkens Kombi putty?
Apply a thin coat to fill little imperfections (pinholes/scratches). Subsequent coats can be applied after intervals of approximately 15 minutes at 70°F (20°C). – Application temperature range between 60°F-95°F. (15°C-35°C).
Should putty be primed?
Priming will help the new putty adhere and add another layer of protection. Be sure to prime all of the bare wood, brushing it into all the corners and hard to reach spots. Any primer you get on the glass can easily be scraped away when dry. When the primer is dry you can begin to putty the window.
Does spot putty shrink?
Applied directly from its easy dispensing tube, Bondo® Glazing & Spot Putty is formulated for quality auto body repairs in less time. It also shrinks very little over time, helping to ensure lasting repairs without rework.
What makes Glasurit a high quality paint brand?
The Glasurit high-quality finish is unmistakable due to its characteristic durability and European-style gloss. OEMs trust our refinish paint brand; Glasurit has earned more OEM approvals than any other on the market. The Waterborne 90 Line offers easy spray-ability and short flash-off times.
Which is the best Glasurit clear over base system?
Glasurit 55 Line is a clear-over-base system — a modern, high-performance line that is trusted by OEMs and refinish specialists worldwide. By offering savings on time and materials usage, 55 Line goes further to increase efficiency and output with a world-class Glasurit finish.
When did BASF start the Glasurit 22 line?
BASF introduced Glasurit 22 Line in 1995 as a high-color system for solid-color refinishing.
Why is the Glasurit 100 line so important?
In addition to being a cutting edge product line, 100 Line is a comprehensive solution that optimizes collision repair processes at all levels. The innovative 100 Line helps customers become more competitive and increase net profits, improve their environmental footprint and drive overall performance.