How long does an S2000 last?
The S2000 is a very well built car. The car will easily last 300,000 miles if you maintain it and don’t abuse it.
Why does rear differential noise sound like a broken gear?
Having a chipped or missing high spot on a gear tooth sounds closely similar to a broken gear except that the rear differential noise only happens while accelerating or decelerating. This is because the problem is just present on one side of the offending tooth.
Why does my Honda rear axle creak when I change direction?
Regardless of model year, if you hear a single pop or creak from the rear of the vehicle when changing direction from forward to backward and vice versa, the problem is likely wheel bearing movement on the rear hub. The original factory spec of 180 lb-ft is insufficient and allows for the wheel bearing to move on the hub.
How to remove wheel nut on Honda s2ki?
Use the staking tool to unstake the nut. It seems that you can remove the nut without unstaking, but it doesn’t take very long to do. An untouched staked wheel nut from the factory. Notice that the paint line follows from axle to the nut. 3. Remove Nut and Grease Nut Face Remove the nut. You can use an impact wrench for this.
What should the torque be on a Honda s2ki?
This procedure prevents this motion and subsequent wear and premature failure of the hubs and bearings. A Service News Article released by Honda in 2001 lists a revised torque spec of 220 lb-ft. Unfortunately, 220 lb-ft is still insufficient. The inner bearing races need to remain pressed tight on the hub.
Why does my rear differential make a clunking noise?
If the pinion bearings are the problem, they create more of a whirring noise than a rumble because it turns several times faster than the carrier assembly. Regular clunking every few feet can also be an indicator of a broken pinion gear and/or chipped and damaged ring gear.
What causes a howling sound in the rear differential?
Broken teeth on the axle gear can result in complete loss of power when turning in any direction and eventually reaching a point where the gears don’t engage at all anymore, bringing the car to a complete standstill. There are various situations which can create rear differential noise. For example, howling of gears is a sure sign of wearing.
What’s the difference between wheel bearing noise and rear differential noise?
Thankfully there are a few simple things that can help distinguish between rear differential noise and wheel bearing noise. Wheel Bearing Noise. Simplest check to identify a failing wheel bearing is to suspend the car so that the wheel does not touch the ground. Then grab the wheel and wiggle it back & forth.