How do you start a Polaris Sportsman 500 4 wheeler?

How do you start a Polaris Sportsman 500 4 wheeler?

Starting the Engine

  1. Position the vehicle on a level surface outdoors or in a well-venti- lated area.
  2. Place the transmission in PARK.
  3. Lock the parking brake.
  4. Turn the fuel valve on.
  5. Sit on the vehicle.
  6. Do not use the choke if starting a warm engine.
  7. If the engine is cold, pull the.
  8. If the knob doesn’t stay where.

What to do if your Polaris Sportsman 500 wont start?

The Polaris Sportsman 500 is a quad designed to haul gear, animals and riders for back country activities. If your Sportsman 500 is giving your problems with starting, there are three areas to concentrate on for troubleshooting. Look at the fuel, spark and battery systems to get the quad back up and running.

When did the Polaris Sportsman 500 Ho start?

I keep a 2009 Polaris Sportsman 500 HO up at the farm. Since there was very little snow this winter, I used it on every visit up until January. I tried to start the machine the first week of February and she wouldn’t start.

What causes a Polaris ATV to not start?

It will be one of three things: The brushes are broken or work out (most likely), the starter is rusty and filled with sludge and crap or that the magnets have become unwelded from the side of the starter case. The first two can be easily fixed with an inexpensive rebuild kit and a cleaning.

What to do if your ATV wont start?

If you don’t then you have an ignition problem. If you do have a spark then pour some gas down the spark plug hole and put back in the plug and see if it fires. If it does then you have a fuel issue. Hopefully this will help some people figure out what direction to work toward.

I keep a 2009 Polaris Sportsman 500 HO up at the farm. Since there was very little snow this winter, I used it on every visit up until January. I tried to start the machine the first week of February and she wouldn’t start.

What does it mean when your Polaris won’t start?

Polaris Sportsman won’t start refers to when the all-terrine vehicle’s engine will not turn on or activate. A starting issue can have many symptoms. For exam…

If you don’t then you have an ignition problem. If you do have a spark then pour some gas down the spark plug hole and put back in the plug and see if it fires. If it does then you have a fuel issue. Hopefully this will help some people figure out what direction to work toward.

How many volts does a Polaris ATV have?

If yes, then meter the contacts of the solenoid while turning over the key. You should have 12 volts on both sides. If you do not then clean both the terminals, reattach the wires and recheck.