How do you restart a Pontiac G6 engine?
Use the correct G6 key to restart your vehicle. Open the G6 door and insert your key into the ignition. Turn the ignition key to crank the engine. If the car will not restart, use a secondary car key to crank the engine. If neither work, then continue to step 3. Listen to the engine as you try to crank it.
How do you reset TPMs on a Pontiac G6?
I need to reset the TPMS on my wife’s 08 G6. We do not have keyless entry, and the procedure for resetting the system in the owners manual says 1. Set the parking brake. 2. Turn the ignition switch to ON/RUN with the engine off. 3. Using the Driver Information Center (DIC), press for about one second. Then press and release displays.
When to check the Check Engine light on a Pontiac G6?
Steady Check Engine Light: If your check engine light is on every time you operate your G6, you need to have it checked as soon as possible, especially if you notice performance problems or unusual noises.
How does the pass key work on a Pontiac G6?
Newer versions of the Pontiac G6 use a passive ignition immobilizer system called PASS-Key III. The system uses radio frequencies to communicate with the key fob you use to start the G6. When you place the key into the ignition, the key and car communicate to ensure the key is legit.
I need to reset the TPMS on my wife’s 08 G6. We do not have keyless entry, and the procedure for resetting the system in the owners manual says 1. Set the parking brake. 2. Turn the ignition switch to ON/RUN with the engine off. 3. Using the Driver Information Center (DIC), press for about one second. Then press and release displays.
What to do if your engine light is on on a Pontiac G6?
The right stop leak product can cure a lot 2007 Pontiac G6 3.5L V6 Change a tail light The burnt out tail light: classic reason for a cop to pull you over – change yours now 2007 Pontiac G6 3.5L V6 See all videos for the 2007 Pontiac G6
How do you re inflate tires on a Pontiac G6?
The process is the same for all Pontiac G6 models, 2005 and newer. Make sure that your air compressor has enough air to re-inflate your tires. If you don’t have an air compressor, park your G6 near an air machine (often found at gas stations) before beginning the process. Turn your engine off and set your parking brake.
How do you check tire pressure on a G6?
Check the tire pressure for each tire, and then add enough air to bring it to the specified level. Inspect the tire specification sticker on the driver’s side door jamb; the recommended tire pressure varies depending on your G6’s tire and wheel size. Replace the valve stems when you are finished.