How do you reset the security on a 2003 pontiac grand am?

How do you reset the security on a 2003 pontiac grand am?

Turn the ignition key to the “Off” position for 10 seconds. 3. Repeat this process 3 times. This should reset the Security light/system and allow you to start your car.

When did my Grand Am security light go on?

1999 – 2004 Pontiac Grand Am In June of 2008, at 79598 miles on the odometer, I began having trouble with my 2002 Pontiac Grand Am SE. The first thing I noticed as I was driving to work was that the “SECURITY”light was on. There did not seem to be any effect on driving, however, and I continued on to work.

Why is my PassLock not working on my Grand Am?

It turns out that although the most common culprit is a Security module in the ignition switch, there are several other possible causes for this Passlock problem. Anything which causes the apparent resistance in the circuit to change by a significant amount will trigger the security system, and cause the car not to start.

What should I do if my GM security light is flashing?

Insert ignition key and turn to the “ON” position. Do not attempt to start the engine. Leave the key in the “ON” position for approximately 11 minutes. The security light will be steady on or flashing for the 11-minute period. Do not proceed to Step 2 until the security light turns off or stops flashing. 2.

Why are the lights not working on my Pontiac Grand Am?

There is a sensor inside the ignition cylinder that has an electronic password. And i had read that if it is the ignition then the lights would not turn off. When you turn the key, the password is sent to the body control module and if it matches, the car will start…if it doesn’t, it won’t start. .

Why is the security light on on my Grand Am?

You cannot just turn it off unless the problem is fixed. The security light is on because you have a problem with your Passlock theft system. There are temporary fixes, like doing a re-learn of the theft deterrent, but the problem will come back.

Why is the security light on on my Grand Prix?

You cannot just turn it off unless the problem is fixed. The security light is on because you have a problem with your Passlock theft system. There are temporary fixes, like doing a re-learn of the theft deterrent, but the problem will come back. Most likely, you need a new ignition cylinder. Those are what usually go bad on the Grand Prix cars.

What should I do if my PassLock security light goes off?

If nothing happens or the engine starts and dies, the security light will be flashing. Wait ten minutes. The flashing light should go off or illuminate without flashing. When it does, turn the ignition off, wait twenty seconds, and then try to start the engine. If it starts and runs, everything is okay.

What should I do if my Toyota Corolla security light goes off?

The ten-minute procedure involves trying to start the engine. If nothing happens or the engine starts and dies, the security light will be flashing. Wait ten minutes. The flashing light should go off or illuminate without flashing. When it does, turn the ignition off, wait twenty seconds, and then try to start the engine.