How do you reset the maintenance light on a 2016 Subaru Outback?
First, turn the ignition to ON (with the engine not running), and select CAR INFO on the navigation system. Select MAINTENANCE. Next, delete any maintenance event that has been completed, and click ADD EVENT, and configure the date and miles of the maintenance interval schedule. Finally, touch FINISH.
How do you change the battery in a Subaru Forester?
Replacing the battery in your Forester involves removing the terminals. When you reconnect the terminals, your radio presets are likely to be cleared out. In some Foresters, you may need to re-enter a security code to get your radio to work again.
How do you change the radio on a Subaru Forester?
In some Foresters, you may need to re-enter a security code to get your radio to work again. Check for this code in your owners manual – it will usually be either a sticker or small card in the booklet.
How to reset my Honda radio after putting in a new battery?
Step 1 Turn the ignition key to the “On” position, but don’t start the engine. Turn the radio on by pressing in on the volume control knob. After 10 seconds, turn the radio off. Press and hold the power button for two to five seconds and watch the radio display. Release the power button when the display lights up and the radio turns on.
What happens when you reset the power window on a forester?
In the older, non-electronic Foresters like mine, it was trip odometer and radio stations. Sometimes there was a bit of relearning required by the Engine Control Module, which resulted in a few rough starts. You might have to reset the power window “auto up”. The procedure is documented in the owners manual.
In the older, non-electronic Foresters like mine, it was trip odometer and radio stations. Sometimes there was a bit of relearning required by the Engine Control Module, which resulted in a few rough starts. You might have to reset the power window “auto up”. The procedure is documented in the owners manual.
How do I Reboot my car’s infotainment system?
• Press and hold the Menu key, the rotary knob, and the button that sits at the upper right of the rotary knob. • Push forward and then hold in place the Nav/Map and Radio buttons while pushing down the rotary knob for about a second. • Hold the volume button down for 10 seconds.
What should I do after taking the battery out of my Subaru?
Click to expand… Also, when you start up the car for the first time after you’ve reconnected the battery, put the key on the “ON” position and let it sit for 10-20 seconds so that car can “remember” some things like engine idle speed, temp, etc. Otherwise it will take a long time to fully start up again.
How do I reboot the audio system in my car?
• Press and hold the audio system power button for 3 seconds. Then a menu will pop up and ask you if you want to reboot the system.