How do you reset the maintenance light on a 2011 Mercedes E350?

Instructions:

Turn the ignition to position 1 (one position before starting the engine).
Press and hold phone button and press and hold down the OK button within 1 second.
Select ASSYST PLUS and confirm with OK button.
Select FULL SERVICE and confirm with OK button.
Select CONF.

How to reset service menu on Mercedes SLK 350?

BTW, there is more than one key sequence to get to the service menus. 2) With the display in the “default” normal driving position, (this should be speed or temperature) press the reset button three times. 7) You should see Confirm Full, Cancel Full, Cancel Items.

How to reset service light indicator Mercedes SLK 200 Kompressor?

Press and hold button to the left of speedometer, while turning key in steering lock to position 2 again. The present status for days or distance is displayed again. Continue to hold button until you hear a signal (approximately 10 seconds). Release button. Service interval displays the reset interval. .

How to reset service light on Mercedes Benz GLK350?

Press the system selection button repeatedly until the menu item vehicle MILLAGE is displayed in the multi-function display. Press and hold the (ACCEPT CALL) button for a second. While holding the (ACCEPT CALL) button press and hold the OK button. After several seconds the service menu should come up.

How do I reset the service Minder light on my Mercedes?

The service minder information display must be reset after performed the maintenance service on your vehicle. Follow the instructions below to reset the Service Minder light on your Mercedes-Benz SLK-280: If your vehicle has an ignition button, press the START-STOP ENGINE button without touching the brake pedal.

How to reset service light indicator Mercedes SLK 350?

Reset service light indicator Mercedes SLK 350. From years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011. How to reset service light indicator Mercedes SLK 350 (171.456). From year: 2004. Switch ignition on and immediately press knob to left of speedometer twice within 1 second. Picture below.

How to reset service on a 2010 Mercedes Benz?

This is a how to video for resetting service on a 2010 E350 Mercedes Benz. This procedure will work on a, E Class, M Class, SLK Class, C Class, GLK Class and CLS Class with same steering wheel design. Models this will work for 166, X166, 172, 204, X204, 207, 212 and 218 with same steering wheel design. Please like and subscribe. Loading…

When did the Mercedes Benz SLK 280 come out?

The convertible is the second generation of the SLK series and successor to the Mercedes-Benz R 170. The R 171 was built at the Mercedes-Benz plant in Bremen. The vehicle was first presented at the 74th Geneva Motor Show. Sales start in Europe was March 27, 2004, on March 26, 2011, he was replaced by the third generation.

How do you reset the maintenance light on a 2011 Mercedes e350?

Instructions:

Turn the ignition to position 1 (one position before starting the engine).

Press and hold phone button and press and hold down the OK button within 1 second.

Select ASSYST PLUS and confirm with OK button.

Select FULL SERVICE and confirm with OK button.

Select CONF.

When to reset service overdue on 2011 c250?

The remaining time is the primary decisive factor for the service indicator if the remaining time is reached before the remaining distance. The maintenance interval based on the remaining time is permanently stored in the ASSYST PLUS and is 12 months for “Service A” and 24 months for “Service B”.

Where is the maintenance interval stored on a c250?

The maintenance interval based on the remaining distance is permanently stored in the ASSYST PLUS and is currently 25,000 km for “Service A” or 50,000 km for “Service B” for European countries. The remaining time is determined in the ASSYST PLUS.

How does the steering wheel work on a c250?

The request is read in by the steering wheel electronics (N135) and sent over the steering LIN (LIN E1) to the steering column tube module control unit (N80). The steering column tube module control unit forwards the request over the chassis CAN to the instrument cluster.

When to reset service due light on Mercedes Benz C250?

Service due require light on Mercedes Benz C250 serves as an indicator which shows up on your cluster board. It helps track when your next oil change is due. Oil light reset on Mercedes Benz 250 should be carried out after a successful oil change. Below is a step by step guide on how to reset service due light on Mercedes Benz C250.

How to reset service light indicator Mercedes E320?

To call up the trip odometer and main odometer, press either of lower two buttons on left hand side of steering wheel (system select looks like file folder) until the display appears. Press either of the top buttons on steering wheel (arrows) until the FSS indicator appears. Press R button on the instrument cluster for 2, 4 seconds.

How to reset service intervals on Mercedes Benz?

Instructions on how to do that on several different models are shown below. The second method is to use a OBD II scanner such as the iCarsoft MB II which allows you to reset the service intervals on most Mercedes-Benz models. The Service A maintenance appointment will include the following tasks:

Navigation