How do you replace a rotor on a Avalon?
Place the new rotor (s) onto the wheel hub and replace the caliper and bridge over the new rotor. Line up the caliper bridge bolts to the holes in the knuckle and tighten securely with the ratchet and a socket. Repeat step for the other side. Replace the wheels and lug nuts. Tighten snug and lower the Avalon to the ground.
How do you replace master cylinder cap on Avalon?
Replace the master cylinder cap securely. Break the lug nuts loose on the front tires with the breaking bar and a 21 millimeter socket. Lift the front of the Avalon with the floor jack and place a jack stand under the left and right front frame rails. Remove the lug nuts and wheels.
How do you remove brake fluid from Avalon?
Park the Avalon on a flat paved surface. Apply the parking brake and release the hood latch. Place a wheel chock behind one rear tire, open the hood and remove half of the brake fluid from the master cylinder reservoir using the turkey baster. Discard the fluid appropriately and do not reuse.
How do you break a tire on an Avalon?
Break the lug nuts loose on the front tires with the breaking bar and a 21 millimeter socket. Lift the front of the Avalon with the floor jack and place a jack stand under the left and right front frame rails.
How do you lift the front of a Avalon?
Lift the front of the Avalon with the floor jack and place a jack stand under the left and right front frame rails. Remove the lug nuts and wheels. Compress the piston of the left front caliper using the pry bar wedged between the caliper porthole in the front and the rotor.
How do you remove lug nuts from Avalon?
Break the lug nuts loose on the front tires with the breaking bar and a 21 millimeter socket. Lift the front of the Avalon with the floor jack and place a jack stand under the left and right front frame rails. Remove the lug nuts and wheels.
When do you replace the brake rotors on a Toyota?
Replacing the caliper is as simple as unbolting the Banjo bolt (14mm) and bolting the brake line to the new caliper. Rotors should be replaced when the run-out becomes excessive (as measured by a dial indicator), warped or rusted.
How do you change master cylinder in Avalon?
Park the Avalon on a flat paved surface. Apply the parking brake and release the hood latch. Place a wheel chock behind one rear tire, open the hood and remove half of the brake fluid from the master cylinder reservoir using the turkey baster. Discard the fluid appropriately and do not reuse. Replace the master cylinder cap securely.