How do you remove a tailgate motor on a Bronco?
Turn the motor’s mount bolts in a counterclockwise direction and remove the motor by pulling it free of the window regulator gears. If the glass is in the way (retracted for lowering the tailgate), it can be temporarily raised by working the window regulator arms manually. Only a few inches should be required.
What do I need to swap my Bronco engine?
Parts Needed for an Early Bronco Coyote Swap 1 Oil pan 2 Intake 3 Throttle Body 4 Fuel Injectors 5 Spark Plugs 6 Alternator 7 Front Engine Accessory Drive
How do you replace window motor on Bronco?
Replace the motor by mounting it into the window regulator, turning the mount bolts clockwise then plugging it back into the wiring harness. Lower the glass back to its original position. Replace the door panel by tapping it into each pop rivet then screwing the panel back into place.
Can a rear sump pan be used on a Ford Bronco?
Some people have been able to use the front-sump pan on stock-height Broncos, but the general consensus is that the rear-sump pans are not only a better fit, but will be needed to keep the oil in the pan when driving up steep hills, so try to avoid front-sump pans if possible.
Parts Needed for an Early Bronco Coyote Swap 1 Oil pan 2 Intake 3 Throttle Body 4 Fuel Injectors 5 Spark Plugs 6 Alternator 7 Front Engine Accessory Drive
Where do you plug in the wiper on a Bronco?
Plug in the wiper motor to the power cord and hook over the top mounting bolt of the solenoid pack if your model Bronco has one. Replace the intake grating and screw it in. Cover the screws with the plastic cover pins, reattach the wiper arms, tighten on the nuts, and cover the nuts with the rubber stoppers.
Can you put a Coyote engine on a Bronco?
Also, if you want to install the Coyote engine using the frame off approach, then you will need space for both the frame and the outer body of the Bronco. It’s possible to drop the engine directly into the Bronco, but the frame off approach will make the whole process a bit simpler.
What kind of transmission do I need for a Ford Bronco?
To preserve your Bronco’s 4WD, you’ll need a 4WD-capable transmission. You’ll also need an adapter to mate it to your Dana 20 transfer case. Most people select one of the transmissions that the 4WD-equipped F-150 uses.