How do you program a Jeep Commander key?
How to Program a Key for a 2006 Jeep Commander
- Place your first working key in the ignition. Turn it to “On,” but don’t crank the engine.
- Insert the second key into the ignition. Turn it to “On” and wait about 10 seconds.
- Turn the key back to “Off” and remove it from the ignition. Insert the key you want to program.
What is the problem with my Jeep Commander?
My ’06 Commander seems to be having some electrical problems. The rear assist lights come on, the auto high beam/low beam changes on the computer, the air bag light comes on & chimes. If the A/C is on, it goes from face to feet & back up. I’ve had it in & the dealer changed the ignition switch. This didn’t fix it.
What kind of key do I need to program my Jeep Cherokee?
In other words, if you find your old key after programming the new one, it will not work. Therefore, we highly recommend having at least two new cut keys and program them both. B. There are a few transponder keys (Y160-PT, Y164-PT, FOBIK, Push to start remotes etc) that work on Jeep models.
Can a locksmith replace a jeep FOB?
A: Sure, an automotive locksmith can make a replacement key or fob for Jeep cars. However, not all automotive locksmiths have the necessary equipment to cut and program the key and therefore it would be wise to verify with the locksmith he can cut and program the key.
What should I do if I Lost my Jeep key?
This is important so the locksmith can check if he or she has the right key blank. Furthermore, remember to ask if the key needs to be programmed or coded, some models do – e.g., a replacement key for 2017 Jeep Wrangler will need to be programmed, whereas a 1995 Jeep Cherokee won’t.
Is there a replacement key for a Jeep Commander?
For Jeep Commander models that are older than 10 years: There are no codes available. Therefore, an automotive locksmith is your only option to get a replacement key. For Jeep Commander models that are equipped with a transponder system and/or remote/ intelligent key/ fob key: Codes are available.
Do you need to program a Jeep Commander?
Jeep non-transponder keys are metal keys that have no chip in them. Therefore, no programming is needed. Jeep Commander has none of this key type – all Jeep Commander keys have a chip and need to be programmed. These keys, also known as remote smart keys, intelligent keys or key fobs, and transponder keys, have a security chip.
Is there a recall on the Jeep Commander?
CHRYSLER IS RECALLING 24,461 MY 2006 JEEP COMMANDER VEHICLES EQUIPPED WITH 4.7L V8 ENGINES. THE POWERTRAIN CONTROL MODULE (PCM) WAS PROGRAMMED WITH SOFTWARE THAT MAY ALLOW THE ENGINE TO STALL UNDER CERTAIN OPERATING CONDITIONS.
What to do if you lost your Jeep Cherokee key?
The VIN gives dealers or automotive locksmiths the option of accessing the key code on file – i.e., to cut you a replacement key by code which makes the process fast and easy. There are however two things to consider: For vehicles older than 10 years: Jeep dealers don’t keep a record for vehicles older than 10 years.
The Commander’s keys can be programmed at home. However, the procedure is only useful if programming an extra key. If you do not have two currently programmed keys, you’ll need to visit a Jeep dealer for key programming with a dealer-only scan tool. Place your first working key in the ignition. Turn it to “On,” but don’t crank the engine.
Why is my Jeep fob remote not working?
Guess it’s the WCM (whatever that is) within the Jeep. Wireless control module… Typically if a dealer needs to reset something there is another underlying cause… Not that I would have ANY idea what that is over the interwebz. Personally I have never had to reset a wcm to repair a key problem.
How do you change the ignition key on a jeep?
If you do not have two currently programmed keys, you’ll need to visit a Jeep dealer for key programming with a dealer-only scan tool. Place your first working key in the ignition. Turn it to “On,” but don’t crank the engine. Keep the key at the “On” setting for eight seconds, and then turn it back to “Off” and remove it.
Is it possible to make a duplicate key for a Commander?
This setup is part of the vehicle’s anti-theft system; it makes it harder for a thief to make a duplicate key for your Commander. The Commander’s keys can be programmed at home. However, the procedure is only useful if programming an extra key.
Why does my key fob not work on my Jeep?
Just wondering if anyone has had similar issues and found a solid solution. My FOB seems to only work sporadically. Sometimes it works first try but most times I need to hit the button many times before any action happens. Most times I will stand there at the drivers door just hitting the button in hopes the door will unlock.
Can a key fob set off an alarm?
Sure is embarrassing standing there beside the Jeep not being able to get back in. And if you use the key to unlock the door you set off the alarm! Exactly. Setting off the alarm in a parking lot is rather embarrassing.
What to do if your Jeep remote is not working?
1. Remove the battery. 2) Use 1/3 of a sticky note, fold it, and place it within the round battery slot (on the floor beneath where the battery is placed. 3) Put the battery in on the folded note. WALAAA! Thank you so much, this worked for me!!! It simply is a problem with the battery positioning within the fab. 1. Remove the battery.
How much does it cost to replace a jeep FOB?
The signal goes full strength on those test kiosks. Is the problem more likely the FOB or is there a receiver unit in the Jeep that is more plausible? I see the factory key replacement is part number 5183349AA and can be found for around $130. If that receiver is the issue, how much are those and what are the part numbers?