How do you change the oil on a Harley Davidson Dyna?
Dyna and Touring models have their oil drain plugs under the transmission housing. Drain the engine oil into an oil pan. Replace the drain plug’s O-ring, then screw it into place after the oil has drained. Tighten the drain plug to 18 foot-pounds with a torque wrench.
Where is the oil drain plug on a Harley Davidson?
Oil drain plug location (left side of bike). While the engine oil is draining from the cases, proceed with replacing the oil filter. Many owners have successfully used half of a 2-liter soda bottle under the oil filter to catch oil when removing the filter. Various household items can be used as a makeshift funnel.
How do you change the oil on a Harley Davidson?
Evidence of engine wear is found by this presence of this metal shaving. Now we will move to the other side of the bike to remove the filter. The Harley filter wrench is just the size to fit between the shift linkage and the filter itself. Also,there is an electrical wire just below the filter, Be careful not to mangle the wire.
How do you remove oil from drain plug?
Clean up any residual oil around the drain plug with a shop rag. Remove the oil filter with the oil filter wrench. Wipe the faceplate on the oil filter mount to remove any old oil and road grime and to ensure the old gasket did not remain stuck to the faceplate.
What kind of oil does a 1993 Harley Davidson use?
Whether it’s extreme temperatures, high-rpm riding or stop-and-go traffic, our motor oils will keep your 1993 Harley-Davidson FXDL Dyna Low Rider protected. We produce synthetic motorcycle oil, oil filters, transmission fluid, primary fluid and fuel additives – everything to keep your FXDL Dyna Low Rider running smoothly for the long haul.
Where do you drain oil on a Harley Davidson?
Drain the transmission oil. The transmission drain plug it centered directly above the shock absorbers. Because both the engine and transmission drain plugs are so close to each other, they can easily be drained simultaneously into the same drain pan. Stand your Harley upright.
How do you change transmission fluid on a Harley Davidson?
They remove the dipsticks and drain plugs to let the fluids flow into a clean drain pan. Bob preps the drain plugs for reinstall with Loctite threadsealant and reinstall. After those are torqued to spec, Bob fills the transmission fluid and then to the oil filter before he fills up the oil pan.
Where is the oil drain plug on a Dyna Glide?
Place a catch pan under the engine and remove the oil drain plug using a 5/8″ wrench or socket. Be sure to collect the drain plug O-ring, as well. Figure 2. Oil drain plug location (left side of bike).
Clean up any residual oil around the drain plug with a shop rag. Remove the oil filter with the oil filter wrench. Wipe the faceplate on the oil filter mount to remove any old oil and road grime and to ensure the old gasket did not remain stuck to the faceplate.