How do you change the oil in a Chevy Cobalt?
This video shows you the location of your oil drain plug, oil filter, oil fill cap and dipstick in addition to the steps needed to change the oil and filter in your Cobalt. For most Chevrolets, you can wrap an old belt around the oil filter and unscrew it by hand.
How do you fix a leaking oil filter?
Replace Filter – Add oil to the new oil filter and insert it 8. Remove Oil Cap – Take off the oil fill cap 9. Add Oil – Determine the correct oil type and add oil 10. Replace Cap – Put the oil fill cap back on the engine 11. Leak Inspection – Start vehicle and visually inspect for leaks
How do you remove an oil filter from a car?
These doubts need to be discarded because it is generally accepted that the oil filter in almost all cars (including Ford, Toyota, Mazda, and GM) is unscrewed counterclockwise. This means that you must turn the filter in the left way to remove it from the engine.
Which is the correct direction to remove the oil filter?
Some people don’t know the oil filter removal direction: clockwise or counterclockwise. These doubts need to be discarded because it is generally accepted that the oil filter in almost all cars (including Ford, Toyota, Mazda, and GM) is unscrewed counterclockwise.
How do you replace oil filter on Chevy Cobalt?
Tighten the drain plug to 18 foot-pounds with a torque wrench and six-point socket. Raise the Cobalt from the jack stands, using a floor jack, and remove the jack stands from under the vehicle. Lower the car to the ground. Locate the oil filter cap, the plastic cap nearly 4 inches in diameter.
Where is the oil cap on a cobalt?
Raise the Cobalt from the jack stands, using a floor jack, and remove the jack stands from under the vehicle. Lower the car to the ground. Locate the oil filter cap, the plastic cap nearly 4 inches in diameter. The 2.4-liter engine’s oil filter cap is in plain view on the front driver’s side of the engine.
How do you loosen the oil cap on a 2.4 liter engine?
Loosen the oil filter cap using ratchet and a 32 mm socket, on the 2.4-liter engine. On the 2.0-liter engine, loosen the oil filter cap using a 32 mm socket and a flex-handle ratchet. Remove the tools from the oil filter cap and pull the cap from the oil filter housing. The oil filter remains attached to the cap when you removed it.
How to change the oil in a cobalt?
Oil & Filter Change Chevrolet Cobalt (2005-2010) – 2009 Chevrolet Cobalt LS 2.2L 4 Cyl. Sedan (4 Door) 1. Getting Started – Prepare for the repair 2. Open the Hood – How to pop the hood and prop it open 3. Find Oil Drain – Locate the oil drain plug underneath the vehicle 4. Drain Oil – Set up the workspace, drain oil and replace plug 5.