How do you change the fuel filter on a 2002 accord?

How do you change the fuel filter on a 2002 accord?

How to Change a 2002 Accord Fuel Filter. Tighten the clamp back around the fuel filter with the 10 mm open -nd wrench. Screw the fuel cap back onto the fill neck of the fuel tank until the cap clicks. Turn the ignition to the accessory position for five seconds and then back off again. Turn the ignition on and off two more times for five seconds.

What kind of gas filter does a Honda Accord have?

The Honda Accord model cars built after 2002 come equipped with the fuel filter inside of the gas tank. When the gas circulates through the fuel filter, it traps the impurities before sending the clean gas to the fuel injectors.

How do you change the fuel line on a Honda Accord?

Place the fluid catch pan under this area to catch any spilled gas. Once the nut is removed, pull the lower fuel line off and set it aside. Then, use the 17 mm flare nut wrench to loosen the Banjo bolt on upper fuel line. Rotate the wrench counterclockwise to loosen the bolt, and then remove the fuel line by hand.

How do you replace a fuel filter clamp?

Unclip the alignment hole holding the top of the fuel filter in place, and then remove the fuel filter from the clamp. Dispose of the old filter and place the new fuel filter in the clamp. Then, insert the fuel filter clamp to its original location and secure it with the two 10 mm bolts. Figure 6. Remove and replace the fuel filter from the clamp.

How to Change a 2002 Accord Fuel Filter. Tighten the clamp back around the fuel filter with the 10 mm open -nd wrench. Screw the fuel cap back onto the fill neck of the fuel tank until the cap clicks. Turn the ignition to the accessory position for five seconds and then back off again. Turn the ignition on and off two more times for five seconds.

How do you change the fuel line in a Honda Accord?

Screw the bottom fuel line into the bottom of the fuel filter. Tighten the fuel line nut with the 14mm open end wrench. Screw the top banjo bolt into the top of the fuel filter. Tighten the banjo bolt with the 17mm open end wrench. Slide the catch pan out from under the Accord.

The Honda Accord model cars built after 2002 come equipped with the fuel filter inside of the gas tank. When the gas circulates through the fuel filter, it traps the impurities before sending the clean gas to the fuel injectors.

Unclip the alignment hole holding the top of the fuel filter in place, and then remove the fuel filter from the clamp. Dispose of the old filter and place the new fuel filter in the clamp. Then, insert the fuel filter clamp to its original location and secure it with the two 10 mm bolts. Figure 6. Remove and replace the fuel filter from the clamp.