How do you change oil on a Mercury outboard engine?
Steps for Changing the Oil on a Mercury 40-60HP Four-Stroke Outboard Motor. Tilt the engine up to the trailering position. Turn the outboard so the drain hole is facing downward. Remove the drain plug and drain the engine oil into an appropriate container. Once oil is completely drained, lubricate …
Where do I find the oil in a Mercury 4 stroke?
On a Mercury four-stroke, engine oil weight and capacity can be found by reviewing the tag on the engine under the cowling cover, or by looking in your owners’ manual. Before you start draining your old oil, take notice of the oil level on your dipstick. Lower the engine to the running position and remove the cowling.
How much oil does a Mercury 60 hp take?
This is a nice all in one kit but as previous reviews have stated, its one quart low for my Mercury 60 hp 4 stroke. I found out after ordering that my engine takes 106 oz of oil.
How much oil is in a Mercury filter kit?
This kit contains 96 oz of oil. Mercury needs to fix this, its advertised as a kit for 40/50/60 hp engines. After using the three supplied containers the reservoir still said it was still low! Once I added a fourth quart it was at the recommended level…this makes no sense to me as it is made by the manufacturer!?!?
Where to put drain plug in Mercury outboard?
Thereafter you will need to locate and identify both the upper and lower Fill and Drain Plugs. Place an oil drainage pan beneath the outboard where you will remove the bottom drain plug. Some oil will begin to trickle out so you need to make sure that the oil drain pan is positioned correctly to catch the draining oil.
How do you change the oil in a Mercury outboard?
Add Oil: To refill the lower unit, insert the bottle or tube into the bottom drain hole and slowly squeeze the bottle to force the oil into the lower unit. We recommend original manufacturer marine oil for best performance and longivity. Read more about brand name vs generic oils here.
How to check out a Mercury 4 stroke outboard?
Wash the engine cowling and lower unit, and apply a couple of coats of marine wax to protect the paintwork and the fiberglass from UV rays. 3. Remove the top cowling and look for wildlife (birds, rodents, bugs, etc.) that may have nested within the powerhead during storage, and remove them and anything they left behind. 4.
How long does it take to drain oil from Mercury?
Now remove the top drain plug; this will release the vacuum that exists and allow the oil to drain freely from the Mercury lower unit. Allow all of the oil to drain completely from the lower unit. This process can easily take between 5-10 minutes. Once all the oil has been completely drained, the lower unit will have to be re-filled.