How do you change a wheel bearing on a Saturn Vue?
Break the spindle nut loose one full turn with the breaker bar and a 34-mm spindle nut socket for a front bearing or a 30-mm spindle nut socket for a rear bearing. Lift the Vue with a car jack and place a jack stand beneath the SUV to support it.
Where are the retaining bolts on a Saturn Vue?
Spray the front and rear hub flanges with lubricating spray on the front and rear where the bearing retaining bolts are located. The front Vue bearings employ three retaining bolts and the rear bearings use four. Allow the penetrating lubricant time to soak in. Disconnect any ABS sensor wires connected to the hub bearing assembly.
Is the ABS on my Saturn Vue Xe working?
L8tr! Every winter for the past few years, the ABS and traction control lights come on in our 2008 Vue XE. The first time I took it in, they fixed it under warranty. The second time, they said the original repair was under warranty, and they fixed it again.
What kind of accessories does a Saturn Vue have?
In addition to these features are car accessories and parts that perform as well: Saturn VUE adapters, air filters, bugshields, bumper guards, car covers, cargo liners, electric window crank systems, floor mats, lug nuts, nerf bars and oil filters.
Break the spindle nut loose one full turn with the breaker bar and a 34-mm spindle nut socket for a front bearing or a 30-mm spindle nut socket for a rear bearing. Lift the Vue with a car jack and place a jack stand beneath the SUV to support it.
Spray the front and rear hub flanges with lubricating spray on the front and rear where the bearing retaining bolts are located. The front Vue bearings employ three retaining bolts and the rear bearings use four. Allow the penetrating lubricant time to soak in. Disconnect any ABS sensor wires connected to the hub bearing assembly.
How do you remove a hub cap from a tire?
Remove the hub cap or center cap from the tire in question if applicable. Break the lug nuts loose 1/8 of a turn counterclockwise with the lug wrench. Break the spindle nut loose one full turn with the breaker bar and a 34-mm spindle nut socket for a front bearing or a 30-mm spindle nut socket for a rear bearing.
How do you replace a front wheel on a Saturn Ion?
Attach the steering knuckle to the suspension strut, align the mounting holes, and push in the two (2) bolts. Since the bolts are splined, the bolts must be hammered into the steering knuckle. Screw on the bolt nuts and torque down. Torque down the CV axle shaft nut.
How do you remove steering knuckle from Saturn Ion?
Remove the two (2) nuts and bolts that holds the steering knuckle to the suspension strut. The bolts have splines and must be hammered out of the steering knuckle. Protect the bolt threads by keeping the bolt’s nut on the end of the bolt threads. Detach the steering knuckle from the suspension strut. A pry bar can help with the removal.
Who is the owner of the 2004 Saturn Vue?
2004 Saturn VUE Owner ManualM SATURN, the SATURN Emblem, and the name VUE are registered trademarks of Saturn Corporation. GENERAL MOTORS and GM are registered trademarks of General Motors Corportation. This manual includes the latest information at the time it was printed.
How do you lower the seat in a Saturn Vue?
•Move the seat forward or rearward by moving the control forward or rearward. •Raise or lower the seat by sliding the control up or down. •Raise or lower the front portion of the seat by sliding the front of the control up or down. •Raise or lower the rear portion of the seat by sliding the rear of the control up or down. 1-3 Manual Lumbar