How do you adjust the rear shock on a 400ex?
Yes the stock 400ex rear shock is great. When revalved it can perform the same as a full aftermarket shock. Yes on the compression clockwise makes it stiffer and counterclockwise makes it softer. On the rebound be careful bc clockwise slows it down and counterclockwise speeds it up.
How much compression should a 400ex have?
Typical compression on a 400EX is something in the neighborhood of 120 to 170 psi. As long as the compression is over 110, it will start and run – usually at 90 psi and under, it won’t start or has to be push started.
Can you adjust shocks?
Many adjustable shocks are similar when it comes to adjustment. The shock absorber doesn’t have to be removed for adjustment. Once installed, all changes are handled externally with the adjustment knob. By turning the knob clockwise, each click will increase the shock resistance.
What is the best shocks for drag racing?
The 8760PB-Drag is our best shock option for drag racing. The 8760 is a high quality piggy back triple adjustable shock that uses standard Penske parts.
How do you adjust strange rear shocks?
Adjust the knob gently by hand and never force the knob beyond the ten settings. Turning knob clockwise will increase (stiffen) extension forces. Turning knob counter-clockwise will decrease (soften) extension forces. Strange shocks are assembled, inspected and remain at softest setting.
How do you adjust Elka shocks?
To adjust properly, turn the adjuster 2-3 clicks at a time and take a test ride. The adjustment is more sensitive towards the Slower side than the Faster side. When the rebound setting gets too slow, the shock absorber will not have time to resume to its initial position when a series of close bumps is encountered.
What kind of shocks do I need for a Honda 400ex?
Their best bet is to get a good front set of shocks. A nice set of triple rate shocks without reservoirs can be found for around $200-$300. Once they’re set up for trail riding, they’ll give you a nice plush ride through the woods. If you properly set up the rear shock according to your weight, it is pretty good for general trail riding.
When to replace the swingarm on a Honda 400ex?
Most of the A-riders on the GNC and GNCC circuit replace the swingarm, as do most of the B-riders, and with C-riders making the switch. Any time we put on a new rear swingarm, we always put on a new Axis rear shock. There are some other reasonably good shocks out there, but Axis just goes that extra mile to make a better part.
How to adjust the shock spring on a MX bike?
Adjust rear shock spring on MX bike with no special tools. Yamaha example. – YouTube Here I show you the easiest way to adjust the rear shock spring on your dirtbike. Shock spanner wrenches are pretty much useless so learn how the easy way! Here I show you the easiest way to adjust the rear shock spring on your dirtbike.
Which is the weakest link on a Honda 400ex?
It helps the machine steer better, there is less bumpsteer and overall the front end is virtually indestructible. Swingarms are the weakest link on the 400EX. It helps to re-valve the rear shock beforehand, but if you’re a big jumper, you’re going to blow it out regardless.