How do I set the time on my R1?
- System settings. To change system settings press and hold. INFO/MENU.
- Set time/date. PLEASE NOTE: Manual time &
- Auto update time. Adjust how time and date is.
- Set date format. Adjust the on screen date format.
- Time. Adjust how the time and date are.
- Set 12/24 hour. In ‘Time’ menu, use ▼▲ to.
How much horsepower does a 2010 Yamaha R1 have?
Specifications
| Year | 1998 – 1999 | 2010 |
|---|---|---|
| Engine | ||
| Rev limiter | 13,750 rpm | |
| Manufacturer rated horsepower (crank) | 150 hp (110 kW) | 191 hp (142 kW) @ 12,500 rpm without ram air |
| Rear wheel horsepower | 129.4 hp (96.5 kW), 129.3 hp (96.4 kW) @ 10,550 rpm | 180.7 hp (134.7 kW) |
What type of oil does a 2009 Yamaha R1 take?
10W is what Yamaha recommend, and I know a few R1 riders who have put more than 70,000 k’s on their plankers (09–14) R1’s, and they use a 10W40.
How do you set the clock on a 2006 Yamaha R1?
Setting the Clock. Push ‘SELECT’ and ‘RESET’ buttons together for at least 2 seconds. When hour digits start flashing push the ‘RESET’ button to set the hours. Push ‘SELECT’ button and minute digits will start flashing. Push ‘RESET’ button to set the minutes.
How to get Diag on a Yamaha R1?
Turn off the ignition, put the stop engine button in the ON position. Disconnect the fuel pump connector. Press the SELECT + RESET buttons on the dashboard at the same time and do not release. Turn on the ignition (we still hold the buttons) and wait ~ 8 seconds until “dIAG” appears on the dashboard.
How to turn off the stop engine on a Yamaha R1?
Release the buttons, use the SELECT button to select “dIAG” (for the case if another text appears on the dashboard). After dIAG is displayed on the screen, press both buttons on the dashboard (SELECT + RESET) for ~ 2 seconds. After the diagnostic mode (d01) is displayed on the dashboard, turn off the stop engine button.
How to set shift timing on Yamaha YZF-R1?
Push the “SELECT” button to con- To set the shift timing indicator light de- firm the selected brightness level. firm the selected indicator light ac- activation function The control mode changes to the tivity. Handlebar switches brightness This model can be equipped with an 1.
What does er-4 mean on a Yamaha R1?
Er-4 – error communicating with the dashboard; Turn off the ignition. Turn off the Start / Stop Engine button (red on the right remote). Press both buttons on the tidy and HOLD THEM. Turn on the ignition, hold the buttons after turning on the ignition for about 8 seconds.
How long does it take to repair a Yamaha R1?
The procedure involves removing the engine from the bike, splitting open the engine cases, and completely removing and reinstalling a whole new gearbox – a job that Yamaha estimates will take at least 16 hours of labor, plus around $500 in parts. The parts kit Yamaha is providing for the repairs. As you can see, it’s not small.
What’s the PWR setting on a Yamaha R1?
PWR: Power. This bike is equipped with a “fly-by-wire” throttle. This means turning the grip does not actually open the throttle. As the grip is twisted the bike determines how far to open the throttle based on the PWR setting the rider has selected.
Are there any problems with the 2015 Yamaha R1?
The 2015 R1 and R1M have weaknesses in the gearbox – specifically, weak 2nd, 3rd, and 4th gears – that could cause them to break under extreme stress, making the transmission to lock up, and potentially cause injury or death.
Which is the shortest stroke of a Yamaha R1?
In addition to its new cross plane crankshaft, (all other in-line-fours have a 180° flat plane crank) the Yamaha R1’s engine now has the shortest stroke of any 1000 as well as the previous R1: 2007/8 R1: 77 x 53.6mm, 2009 R1: 78 x 52.2mm.