How do I reset my phantom 3 battery?
To reset it, you need to have the DJI charger on hand. Press the ON button two times and ignore any of the lights that may flicker. Do not press any other button but let the battery rest for another 5 minutes and plug in the charger but don’t press any button this time around.
What is P mode on Phantom 3?
P mode is preferred for most flying scenarios, it is the most automatic flight mode relying on GPS outdoors, or the vision system when indoors. Users can switch to A mode when P mode is unavailable, or the UAV is behaving erratically.
How do you take the battery out of a DJI Phantom 3?
Please keep in mind when powering off the battery, you need to press once then press and hold the power button for more than 2 seconds, the gap between two presses should be short.
How do you calibrate your drone?
While holding the drone level with the ground, spin it horizontally until a light turns green. Next, rotate the drone vertically (to the ground). Slowly spin until the second light turns green. If you have made an error during calibration, there will be a red flashing light.
Why is my GPS not working on my Phantom 3?
If the GPS module is damaged, it will need to be replaced. The motor will not start unless there has been a compass calibration, which needs to be done outdoors. To calibrate, tap the aircraft status bar at the top of the camera screen then press calibrate and follow the instructions.
Can a DJI Phantom 3 remote controller be calibrated?
Pay close attention for any warning lights on the quadcopter and warning signals in the DJI Pilot App. This errors and warning will help you troubleshoot the problems. While this post concentrates on the Phantom 3 IMU calibration, you can also calibrate the gimbal and remote controller on the Phantom 3.
How long does IMU calibration take on Phantom 3?
The Phantom 3 IMU calibration procedure is simple and takes between 5 and 10 minutes. The IMU calibration will fix many of the Phantom 3 issues including erratic flying, no signal and compass errors.
How often does a DJI battery need to be calibrated?
DJI’s battery FW requires calibration every 20 cycles or when the App notify you. This is to prevent the false readings between the actual voltage in the cells and the % displayed in the App. 1.