How do I reset my low pressure warning?
Turn the car key to “on” but don’t start the vehicle. Press and hold the TPMS reset button until the tire pressure light blinks three times. Release the button and start the car. The light should go off within 20 minutes.
What must you do if the low pressure warning indicator activates?
Importantly, if the system air pressure drops low enough to activate the warning, the driver must get the vehicle off the road immediately and investigate the source of the problem. Do not continue until the problem is corrected.
What do you do when your low pressure light comes on?
When the TPMS light comes on – and stays on – at least one of your tires is at a low pressure level. Check the pressure of all of the tires with a gauge and determine the cause of pressure loss and add air or service the tire(s) as appropriate.
How do you test the low pressure warning system?
It is essential that your low pressure warning light functions properly. After allowing the system to charge, you can test the warning signal by rapidly applying and releasing the brake pedal. This will release air from the braking system and the warning signal should come on when pressure drops to a dangerous level.
Where is the TPMS reset button on a Hyundai Elantra 2020?
The TPMS reset button is usually located under the steering wheel.
What’s the best way to reset TPMS warning light?
This might be the easiest method as it requires you to drive your car at 50 mph for about 10 miles, and the sensors will automatically calibrate themselves after you made sure that the tires have the right tire pressure. Some vehicles require a higher speed, and you can also use the cruise control to keep the speed constant.
What should you do if your low tire pressure warning light comes on?
Tire Damage. Most drivers shrug off bumping a curb, but damage can compromise the air seal and even the structural integrity of your tire. If your low tire pressure warning light comes on while driving, it’s best to pullover and do a visual inspection. Check for any signs of sagging or deformities in your tires’ shape.
Is it safe to ignore low pressure warning light?
So, if it’s a very cold day – and if you check your pressure regularly – it’s likely safe to ignore your low pressure warning light (only it never hurts to check). Most drivers shrug off bumping a curb, but damage can compromise the air seal and even the structural integrity of your tire.
How do I reset the tire pressure light?
With the vehicle off, turn the key to the “On” position, but don’t start the car. Hold the TPMS reset button until the tire pressure light blinks three times, and then release it. Start the car and wait 20 minutes for the sensor to refresh.