How do I know if my BMW fuel pump is bad?
Symptoms of a high-pressure fuel pump failure are:
- Delayed start of the engine.
- Hesitation or sputtering in acceleration between 2000 RPM to 4000 RPM.
- High engine temperatures.
- Vehicle stalling due to exertion or temperature.
- Fuel pressure gauge reading low measurements.
- Poor gas mileage.
How does a weak fuel pump act?
A weak fuel pump may still pump fuel, but the vehicle may experience difficulty starting from the lack of pressure. A weakened fuel pump can cause the vehicle to take more cranks to start than normal, and in more serious cases may even cause the vehicle to require multiple turns of the key before it will start.
Is it OK to drive with bad fuel pump?
”It is not safe to drive with a faulty fuel pump because when a fuel pump is faulty, it can no longer supply the fuel system with constant fuel pressure and your vehicle won’t start, it can stall, or even completely shut down at any time.
How to change fuel filter in Series 60 Detroit Diesel?
How to Change the Fuel Filter in a Series 60 Detroit Diesel. 1 Step 1. Locate the fuel filters on the engine. Depending on what model the Series 60 is, there will either be two spin-on fuel filters (primary and 2 Step 2. 3 Step 3. 4 Step 4.
Where is the fuel pump on a Detroit Diesel?
Current adaptorless air compressors also drive the engine fuel pump which is bolted to the rear end of the compressor. The compressor crankshaft is designed to accept a drive coupling placed between the compressor and fuel pump. Detroit Diesel does not service the adaptorless air compressor.
Where is the fuel pump located on a series 60 engine?
The original air compressor drives the engine fuel pump which is bolted to the rear end of the compressor. The air compressor is designed to accept a drive coupling placed between the air compressor and fuel pump. Certain applications, and all Series 60 engines built before 1990, do not use the air compressor to drive the engine fuel pump.
Where are the fuel filters on a Toyota Series 60?
Locate the fuel filters on the engine. Depending on what model the Series 60 is, there will either be two spin-on fuel filters (primary and secondary) or one spin-on (primary) and one element cartridge (secondary). Place the filter wrench over the primary fuel filter. Turn it counterclockwise until the filter is loose enough to continue by hand.