How do I identify my EJ205 engine?
The name EJ205 is just a basic designation of an EJ engine, with 2.0 liters of displacement, and the 5 or 7 is an identifier for whether it came out of a WRX/Forester (5) or STi (7). Swapping some EJ205 engines is much easier than swapping other EJ205s because not all EJ205 engines have the same characteristics.
What are Subaru model codes?
At Subaru, the model code (also called the chassis number) is always composed of 5 digits and/or letters. The first character always indicates the model of the vehicle, for example, G for Impreza, B for Legacy and Z for BRZ. The second indicates the type of the car body.
What’s the fault code on a Subaru Outback?
Same conditions… Brought it back to dealer, and this time, they confirmed it was the fault code P2404. (Same as last time…) The Evaporative Emission System (EVAP) vents fuel vapors from the tank to the intake manifold so the vapors are burned through the engine’s normal combustion process.
What is the p2404 code on a Subaru Outback?
If the sensor sends back an implausible signal, code P2404 will be set. Click to expand… Has anyone dealt with this issue on an Outback before? It sounds like the faulty part is roughly $150, and will take 2hrs of labor to replace.
How do you reset the Check Engine light on a Subaru Outback?
Then try to slide the cable off the negative battery terminal. You now have to wait 4 to 5 minutes, before your then reconnect the cable and tighten the retaining nut. Finally, start the car engine and wait for the vehicle Subaru’s computer to reset the check engine light.
How to check leak check valve in Subaru Outback?
CHECK POWER SUPPLY OF LEAK CHECK VALVE ASSEMBLY. Turn the ignition switch to OFF. Disconnect the connector from the leak check valve assembly. Turn the ignition switch to ON. Measure the voltage between the leak check valve assembly connector and chassis ground.