How do I clear CMOS on Foxconn?

How do I clear CMOS on Foxconn?

Turn off the computer, unplug the power cord from the power outlet. 2. Remove jumper cap from pins 2-3, put it onto pins 1-2 to short them. This will clear CMOS data.

How do I clear CMOS BIOS reset?

Resetting Your CMOS with a Case Button

1. Turn off your computer.
2. Disconnect your computer from the wall outlet.
3. Locate the case button labelled “Clear” or “Reset.” It’s typically next to or near the power button.
4. Hold the “Clear” or “Reset” button down for five to ten seconds, then release it.

How do you reset the BIOS chip on a motherboard?

Instruction: CMOS-Reset with Jumper Press the Power On/Off button (PC-Case) 3-5 times to discharge the mainboard condensers. Remove the coin cell battery (CMOS battery). Move the CMOS-Jumper to his clear-position (read your mainboard manual to find the jumper). Wait ~ 15 seconds (the longer the better).

How do I reset my Acer motherboard?

How do I reset my BIOS/UEFI to default settings?

1. Press and hold the power button for 10 seconds, or until your system shuts completely down.
2. Power on the system.
3. Press F9 and then Enter to load the default configuration.
4. Press F10 and then Enter to save and exit.

Where is CMOS located?

Find the CMOS battery, which is located on the right side of the motherboard.

What is CMOS reset button?

Clearing the CMOS resets your BIOS settings back to their factory default state. In most cases, you can clear the CMOS from within the BIOS menu. In some cases, you may have to open your computer’s case.

How do I reset my CMOS Gigabyte?

How to CLEAR CMOS?

1. If your motherboard is equipped with Clear CMOS button then press it.
2. If your motherboard has CLR_CMOS (Clearing CMOS) jumper then place a jumper cap on the two pins to temporarily short them or use a metal object like a screwdriver to short these pins for 5 seconds.