How do I calibrate my Plantronics headset?
Step 1: Press the Talk Button and push the Mute Button in for 5 seconds until the Talk Indicator Light begins to flash green. Release both buttons. Step 2: Press the Talk Button again and release. Step 3: The last step is to unplug the AC power adapter for 5 seconds, then reconnect.
How do I sync my Plantronics headset to another headset?
You will need to push the Call Control button on the headset so that it will reconnect with the base. Once the second headset is charged and placed on the original base a re-subscription (pairing) process must be done for the base to recognize the new wireless headset.
How do I pair my Plantronics headset with wo2a?
Go into your mobile phone settings, click Bluetooth and wait for your device to be recognized. You’ll see something like “Headset” Or “Savi 7xx”, once you click the device to be paired, the blue LED light will go solid on your Plantronics WO2 charging base if pairing is successful.
Why is my Plantronics dongle red?
Red light is off indicates the headset is in the base, fully charged. Red light is brightly lit indicates that your headset is currently charging.
How do I factory reset my Plantronics legend?
Reset Plantronics Bluetooth Headset
- Remove the Plantronics headset from your cell phones paired devices.
- Power your cell phone off, then power it back on.
- Pair your Plantronics headset back to your cell phone (follow manual if unsure how)
- Your Plantronics headset should now be reset.
How do I put my Plantronics into pairing mode?
Press and hold the Call button until you hear “pairing.” While the headset LEDs are flashing blue and red, activate Bluetooth on your phone and set it to search for new devices. Select “PLT V5200 Series.” Once successfully paired, indicator lights will stop and you will hear “pairing successful.”
Why is my Plantronics headset blinking green?
The green LED on headset itself indicates the status of the connection between the headset and the base: Off – The headset is in standby mode and saving battery power. Blinking slowly – The headset is active and ready to use. Blinking very rapidly – The headset is not linked to the base station at all.
How to setup the Plantronics CS50 or CS55?
How to setup the Plantronics CS50 or Plantronics CS55. 1 1. Press both the talk button (14) and the mute control button (15) on the headset for 5 seconds. 2 2. When the talk indicator light (17) on the headset blinks, release both buttons. 3 3. Press the talk button again. 4 4. Next reset the base unit by disconnecting the AC power adapter (24a)
How to Reset my Plantronics CS series headset?
Plantronics CS Series Headset Reset 1 Unplug the AC power from your Plantronics charging base 2 Remove your battery (CS70n, CS530, C053 battery can’t be removed) 3 Wait 10 seconds, then replug your AC power and battery 4 Your Plantronics headset should now be reset and working More
Why does my Plantronics CS50 keep beeping?
There is a switch towards the bottom on the right side of the base unit that will switch the IntelliStand feature On and Off. Make sure the AC Power is plugged into the wall and then you can adjust the configuration setting to the clearest setting. One beep every 10 seconds is caused by a low battery warning.
Do you need a new Plantronics Bluetooth headset?
After a firmware update, try your Plantronics Bluetooth headset again and see if the issue is fixed. If the same result, check to see if your headset is within warranty to get a replacement. If not, a new headset will need to be purchased.