Does Pontiac G6 have remote start?

3 Geniune Pontiac G6 Remote Starts found Seamlessly integrated with your vehicle’s anti-theft and remote keyless entry systems. For the Remote Start system to be compatible with the OnStar RemoteLink system, the vehicle must be equipped, from the GM factory, with the remote start feature.

Why is the crank on my Pontiac G6 not working?

When the ignition switch is turned to the Start position, the body control module (BCM) receives battery voltage on the ignition 1 voltage circuit, and less than 5 volts on the off/run/crank voltage circuit. The BCM supplies voltage to energize the RUN/CRANK Relay 32.

What to do if your G6 wont start?

Re: I got a 09 pontiac g6 wont start.there is no crank no… You have know idea how the starting system works , an with the engine light on your best bet would be to have it towed to a qualified repair shop .

Where is the start relay on a Pontiac G6?

The START relay supplies voltage to the S terminal of the starter solenoid, through the 30 A STRTR Fuse 26, in order to crank the engine. Testimonial: “thanks.”

Why does my son’s 08 G6 not start?

My son’s 08 G6 will not start or even try to turn over. It shows error on odometer after all needles have swung on the cluster.I searched the forum for solutions and tried some to no avail.

What does it mean when your G6 won’t start?

There are really two main ways that a vehicle will not start. The first and most common is when it won’t turn over. This just means that the engine doesn’t move when you turn the key. The second way that your G6 won’t start is when the engine turns when you engage the starter, but it won’t fire and run on its own.

The START relay supplies voltage to the S terminal of the starter solenoid, through the 30 A STRTR Fuse 26, in order to crank the engine. Testimonial: “thanks.”

What causes a car to crank but not start?

One of the biggest issues that causes a vehicle to crank but not start is ignition issues. When there is no spark, the engine will not start. You’ll probably have a misfire related code such as P0300, P0301, etc….. Ignition issues can be caused by many things, including bad spark plugs, bad coil packs, bad plug wires, computer issues, and more.

Does Pontiac g6 have remote start?

Starting the Vehicle Press and release the (Lock) button on the transmitter. 3. Immediately press and hold the (Remote Start) button for about two seconds. When the vehicle starts, the parking lamps will light and stay on while the engine is running.

Can a Pontiac G6 remote be programmed at home?

G6 Keyless Remote Programming Instructions The Pontiac G6 replaced the Pontiac Grand Am in 2005. All G6 models have keyless entry as a standard feature. The remote for some Pontiac G6 cars cannot be programmed at home; however, many users report being able to do so on others. If the instructions don’t work, see your dealer for programming options.

When did the Pontiac G6 keyless entry program come out?

by Matthew Fortuna. Introduced in 2005, the Pontiac G6 became one of Pontiac’s top-selling cars. The car often comes standard with a keyless-entry remote program, and the program allows remote access to the doors, trunk, panic button and car starter.

How do you lock your door on a G6?

Release the “Lock” switch on your door and press and hold the “Lock” button on your keyless remote for 10 to 15 seconds. Remove the key from the ignition of your G6, and test the programming. Matthew Fortuna is a full-time freelance writer with a journalism degree from Wayne State University, living in the Detroit metropolitan area.

How do I enter my car with keyless entry?

Enter your car, close all of the doors behind you and press and hold the “Unlock” switch on the driver’s door. Be prepared to hold the tab through the following step. Insert and remove your key from the ignition twice and then insert the key in the ignition a third time.

How to program a replacement key fob for a 2007 Pontiac G6?

I was just curious if anybody here has experience in reprogramming a key fob for a 2007 Pontiac G6. The car seems to have a Vehicle Theft Protection system, because it engages when I lock up the car, but it doesn’t trigger when I mess with the door handle, not sure if thats important but I’m throwing it in there.

Is it possible to program a GM keyless remote?

If your car is a GM post-2010 model, you should contact your nearest car care professional. After 2011, most GM models have already synced transmitters that come with the car when you buy it. Once you determine which category your car fits in, programming a keyless remote becomes a very easy process, only involving a few quick steps.

Navigation