Do they make a 16 inch miter saw?
16 – Miter Saws – Saws – The Home Depot.
Do they make 14 miter saws?
Tempest Technology 406-607 397-K Ventmaster Cutoff Saw, 14″, 6.1 hp, with a 14″ Concrete Diamond Blade.
How wide of a board can you cut with a 10 miter saw?
A saw with a 10-inch blade makes right-angle cuts across a board 5 1/2 inches wide, sufficient for two-by-six lumber. The same 10-inch saw will cut a two-by-four at a 45-degree angle. Manufacturers also make 12-inch versions, which have a maximum cut of about 7 1/2 inches, wide enough for two-by-eights.
Can I cut a 2×12 with a miter saw?
Miter Saw Limitations The biggest drawback of a miter saw is that the smaller (and cheaper) sizes can’t cut completely through wide material, such as 2×10 or 2×12 boards, in one pass. Well, a sliding miter saw can make these cuts, but you’ll spend twice as much for one.
Will a 12 chop saw cut a 6×6?
The geometry that makes it a wide, flat cutter works against it with a taller block. No saw could cut through a 4×4 at a 45-degree bevel angle, nor could any cross-cut a 6×6.
What is a beam saw?
What Are Beam Saws? These saws have a large blade used to cut different sized logs into beams. Often using circular blades which are available in a variety of different styles, beam saws are useful for a range of different jobs.
Will a 12 miter saw cut a 2×12?
The bigger the blade, the deeper and wider its maximum cut. Typically, a 10-inch miter saw will cut a 2 x 6 at 90 degrees and a 2 x 4 at 45 degrees; a 12-inch miter saw will cut a 2 x 8 at 90 degrees and a 2 x 6 at 45 degrees.
Can a 12 miter saw cut a 6×6?
The bevel ranges max out at 45 to 48 degrees. Performance and Cutting Capacity. No saw could cut through a 4×4 at a 45-degree bevel angle, nor could any cross-cut a 6×6.
What are compound Mitre saws?
Compound miter saws feature blades that pivot left and right for angled cuts and tilt in a single direction for beveled cuts. Manipulating the saw on both of its axes at once yields a compound miter cut. Compound miter saws are useful for picture frames, crown moulding or any project that requires angled cuts in two planes.
What is a sliding compound mitre saw?
Sliding Compound Miter Saws. The compound miter saw is a specialized power tool used for making crosscuts in lumber and other materials. It consists of a motor and blade combination mounted on a pivoting arm that is brought down to the material by pulling on a handle.
Which Mitre saw blade?
DEWALT DW3219PT Miter Saw Blade “Best Overall”. It is the best budget compound miter saw blade with its full sharp power and easy for use.
What is a compound chop saw?
A standard miter saw is basically a chop saw that has the ability to make angled cuts, or ‘miters’. Compound miter saws can make both miters and bevels, (for the average woodworker it’s rare to have to cut bevels), and lastly, on a sliding miter saw the blade slides out, allowing for the ability to cut wider boards.