Can you replace an alternator on a 2002 Hyundai Santa Fe?
The procedure for removing and replacing an alternator on a 2002 Hyundai Santa Fe can vary depending on the engine type. In any case, you need an exact duplicate of the old alternator to install in its place, with the exact same size and location of the terminals and the same identification numbers imprinted on it.
What are the symptoms of a Bad Santa Fe alternator?
It’s the labor that makes the job expensive. Here are the most common symptoms of a bad alternator in a Hyundai Santa Fe: The battery light is designed to tell you that there is not enough voltage to properly charge the battery, or that the battery itself is not holding the proper voltage.
How do you remove an alternator from a 3.5 liter engine?
Loosen and remove the alternator drive belt. If the vehicle has a 3.5-liter engine, turn the tensioner’s adjustment bolts with your wrench. For a 2.7-liter engine, rotate the tensioner with a breaker bar. Disconnect the alternator’s electrical connectors. Unbolt and remove the alternator.
What should voltage be on Hyundai Santa Fe?
Set it to read voltage. Specifically, you’ll need to set it to 20V DC. With your Santa Fe turned off, you’ll connect the negative side of the meter to the negative battery post or wire. You’ll then touch the positive side of the voltmeter to the positive battery wire.
Can a bad alternator leave a Hyundai Santa Fe without power?
A bad alternator can leave your Hyundai Santa Fe without power and unable to move. Alternators don’t always go bad in the exact same way. We’ll cover the symptoms of when an alternator goes bad, and how to diagnose a bad one (which is really pretty easy). The alternator’s job in your Santa Fe is to provide electricity as it is running.
Why is my Hyundai Santa Fe AC not working?
Learn if it’s a simple fix or time to seek out a trusted technician. Not your vehicle? Why Isn’t My A/C Working? What are common reasons my Hyundai Santa Fe has air conditioning problems?
Is it illegal to replace refrigerant on a Hyundai Santa Fe?
Depending on location, it may be illegal for a technician to replace refrigerant without updating the A/C system to handle the newest type. See what others are asking about their Hyundai Santa Fe.
Can a bad serpentine belt cause an alternator to stop charging?
It’s worth noting that a bad serpentine belt can cause the alternator to stop charging effectively. It’s pretty easy to tell if one is bad. It’ll look dry rotted.
How do you replace an alternator on a car?
Remove the drive belt. Remove the alternator’s two mounting bolts and remove the alternator. Install the replacement alternator and attach the mounting bolts. Reinstall the alternator drive belt and then tighten the upper and lower adjusting mount bolts. Connect the alternator’s electrical connectors and connect the negative battery cable.
How do you adjust the tension on an alternator?
Connect the alternator’s electrical connectors and connect the negative battery cable. Adjust the tension for the alternator drive belt by prying on the alternator housing and tightening the upper tension and lock bolts followed by the lower bolt. Disconnect the battery cable as described above. Loosen and remove the alternator drive belt.