Can You rebuild a Firebird Pontiac Trans Am?
Firebirds and Trans Ams fitted with the special high-performance engines command the highest values, but certainly the more common Firebird and Trans Am V-8 cars are worth rebuilding. This Tech Tip is From the Full Book, TRANS AM & FIREBIRD RESTORATION: 1970-1/2 – 1981.
What kind of engine does a Pontiac Trans Am have?
The early years saw only Pontiac engines in the 400- and 455-ci sizes. In 1977 the 403 Oldsmobile engine appeared, wheezing its 185 hp. Although technically a big-block engine, the 185 hp was about the same as a base engine in a Corvette.
Are there performance parts for the Pontiac engine?
Numerous performance parts are available for the Pontiac engines (except the 301), Oldsmobile, and, as you probably are well aware, the Chevrolet engine. The 455 Oldsmobile engine bolts in right in place of the 403; the 350 Chevrolet engine bolts in right in where the 305 resides. By 1981, performance was all but gone.
When was the first Trans Am car made?
In March 1969, a $1,083 optional handling package called the “Trans Am performance and appearance package”, UPC “WS4”, named after the Trans Am Series, was introduced. A total of 689 hardtops and eight convertibles were made.
What kind of engine does a Pontiac Firebird have?
Most of the Firebirds being restored today are the performance versions of the Formula and Trans Am. Over the years, many different engines were slotted into the second-generation Pontiac F-Body. The early years saw only Pontiac engines in the 400- and 455-ci sizes.
Where are the fuse panels on a Pontiac Firebird?
In this article, you will find fuse box diagrams of Pontiac Firebird 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 and 2002, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.
How do you reset the ECU on a Camaro Trans Am?
Many people believe simply pulling the negative cable on the battery is suffice to reset the vehicle’s ECU. Read on to learn more about how to properly reset the ECU on your Camaro, Firebird or Trans Am. This step is to have the ECU actively read that the necessary fuses are being reset. Insert key into ignition.
How many horsepower does a Firebird Trans Am have?
For extra insurance, the engine is assembled with generous clearances. Also, an 80 psi oil system is on hand to keep the lubricant flowing while the engine pumps out all its horsepower. And that power flows off the crankshaft in astounding quantities, an impressive total of 310 net horsepower.
What was the fuel line number in 1968 Firebird?
1968 Firebird Main Fuel Line Tank to Pump 2pc, 3/8″ Pass Side Routing, OE Steel PART NUMBER: FUE-2140
What is the secret code for a Firebird Trans Am?
The secret password is SD-455. Simply check that option code on the order blank, and your Firebird will bristle with under-hood muscle.
How much does a Firebird fuel line cost?
Our Price: $7.95 Our Price: $18.00 Our Price: $79.95 Our Price: $4.95 Our Price: $25.00 1969 Fuel Pump to Carb Line 6 Cyl. OHC – OE Steel 1969 Pump to Carb 6 Cyl. OHC – Stainless Steel
Is it possible to rebuild a Pontiac engine?
Before you endeavor to rebuild your Pontiac engine, you need to honestly and accurately assess your mechanical ability, workshop space, and necessary tools. Most mechanically inclined car owners can competently rebuild an engine. Certainly, if it’s your first and you take a thorough and methodical approach, you can rebuild the engine yourself.
How do I get a Pontiac owners manual?
Click on your Pontiac car below, for example the Other Model. On the next page select the specific PDF that you want to access. For most vehicles this means you’ll filter through the various engine models and problems that are associated with specific car.
When did the Pontiac Trans Am Come Out?
Pontiac for instance, introduced their new high performance engine package in 1977 Trans Ams, Formulas and select Can Ams. It was called the W72 high performance package. What Pontiac did was create a new casting number for their 400 engine block and added some nice pieces to improve the engine.
What was the facelift for the Trans Am engine?
The Trans Am and Formula bodies were given a facelift that year that carried them successfully to the end of their 12 year run. The new front end eliminated the grille and pushed all radiator ventilation under the one piece molded nose. An air dam and two turn signal lamp grilles fed cool air to the rad.
Can You rebuild an Oldsmobile engine in Pontiac?
Rebuilding an Oldsmobile engine versus rebuilding a Pontiac engine is not really that different as far as a machine shop is concerned. There are no real differences whether you are rebuilding a Ram Air III, IV, SD 455, or base 400 engine. Rebuild kits are available from most performance retailers, including Jegs or Summit Racing.
What was the last High Performance Pontiac engine?
The W72 was the last Pontiac high performance car engine. Pontiacs’ last high performance engine was a genuine high 13 second runner with minor work. Let’s look closer at a Pontiac W72 engine and the codes that separate it from the regular 400 V8.
What’s the price of a 1996 Pontiac Firebird?
2001 Pontiac Firebird Trans Am WS6 Mecum. The current value of 1996 and ’97 WS6 Pontiacs is about $12,000. More people want the 1998 and later cars with the more desirable LS engine. However, the average price of a ’98 Trans Am Coupe only jumps to $13,000.
When did Pontiac stop offering the Trans Am WS6?
The handling package remained an option throughout the Firebird’s second generation and continued in various forms throughout the third generation, becoming standard on the 1987 Formula and the new top Trans Am GTA model. However, when the fourth generation of the Firebird was introduced in 1992, the WS6 option was gone.
Firebirds and Trans Ams fitted with the special high-performance engines command the highest values, but certainly the more common Firebird and Trans Am V-8 cars are worth rebuilding. This Tech Tip is From the Full Book, TRANS AM & FIREBIRD RESTORATION: 1970-1/2 – 1981.
Most of the Firebirds being restored today are the performance versions of the Formula and Trans Am. Over the years, many different engines were slotted into the second-generation Pontiac F-Body. The early years saw only Pontiac engines in the 400- and 455-ci sizes.
The early years saw only Pontiac engines in the 400- and 455-ci sizes. In 1977 the 403 Oldsmobile engine appeared, wheezing its 185 hp. Although technically a big-block engine, the 185 hp was about the same as a base engine in a Corvette.
How much does a new Pontiac Firebird cost?
All that power, speed, and drag strip mastery cost a lot of money, and the new Pontiac Firebird will cost you supercar money. The car’s manufacturer, Trans Am Depot, is no stranger to building and restoring Pontiacs, and the cars created by the company cost between $70,000 and $200,000. Buyers should have no complaints.
When did Pontiac change the motor mount on the Firebird?
In 1970, Pontiac revised the motor-mount bosses in the Firebird blocks to have five mounting holes; not all of them were tapped. The exception is the 1978 and 1979 400 blocks. They did not have the rear part of the motor mount openings at all.
In 1970, Pontiac revised the motor-mount bosses in the Firebird blocks to have five mounting holes; not all of them were tapped. The exception is the 1978 and 1979 400 blocks. They did not have the rear part of the motor mount openings at all.
Before you endeavor to rebuild your Pontiac engine, you need to honestly and accurately assess your mechanical ability, workshop space, and necessary tools. Most mechanically inclined car owners can competently rebuild an engine. Certainly, if it’s your first and you take a thorough and methodical approach, you can rebuild the engine yourself.
What was the last year a Pontiac Firebird was made?
The 2002 Pontiac Firebird was the last Firebird produced by General Motors, and it was not a shabby muscle car. The engine packed 350 hp and can reach a top speed of 130mph. It is also a very modern car with creature comforts like a modern infotainment system, automatic door locks, heated seats, and others.
What kind of drivetrain does a Pontiac Firebird have?
The Firebirds were either equipped with an automatic or 4-speed manual transmission. The rear axle ratios varied depending on engine, transmission, and even sometimes because of options. The drivetrains were durable for the most part. There may be a difference of opinion on the 301 engines as far as their reliability and durability.
When did the Pontiac Firebird 301 come out?
Coupled with a 2.56:1 rear axle ratio and weighing more than 3,800 pounds, it wasn’t much of a stoplight performer! The 301 light-cast engine was introduced as an effort to increase the fuel economy standards. The turbo version of the 301 was introduced in 1980 after the 400 was discontinued in 1979.
What kind of engine did a Firebird Trans Am have?
It replaced the LT1 Gen II small-block in the Trans Am and Formula. The engine was good for 305 horsepower, and you could get it with a six-speed manual or a four-speed automatic. Any Firebird fanatic knows the 1989 20th Anniversary Indianapolis 500 Pace Car Trans Am used a Buick engine.
What was the new engine for the 1981 Pontiac Firebird?
New for 1981 was the Computer Command Control engine management system, and the 265-cu.in. V-8 (variant of the 301) that was delayed in 1980 was released. It wasn’t all positive news, however.
Coupled with a 2.56:1 rear axle ratio and weighing more than 3,800 pounds, it wasn’t much of a stoplight performer! The 301 light-cast engine was introduced as an effort to increase the fuel economy standards. The turbo version of the 301 was introduced in 1980 after the 400 was discontinued in 1979.
What was the computer control on a Pontiac Firebird?
Computer controls were introduced on the W72 301 engine and on the turbo 301, and a lockup torque converter was used in the automatic transmission with non-turbo engines, all in an effort to increase efficiency.
What do you need to know about the Pontiac Firebird?
Engine Controls, Fuel Pump, Powertrain Control Module (PCM), A.I.R. Pump and Cooling Fans WARNING: Terminal and harness assignments for individual connectors will vary depending on vehicle equipment level, model, and market.
Where are the fuses on a Pontiac Firebird?
Fuse and Relay Center 1 Fuse Usage ABS BAT SOL Anti-Lock Brake System TCS BAT Traction Control System COOL FAN Cooling Fan Control PCM BAT Powertrain Control Module (PCM)
Why was the Pontiac Firebird Trans Am discontinued?
Here’s what we know about the 2021 Pontiac Firebird Trans Am. After being a staple of the brand’s lineup for over eight decades, General Motors discontinued Pontiac in 2010. The iconic brand was discontinued because of the company’s financial problems and the restructuring it necessitated.
What was the inspiration for the Pontiac Trans?
Their anniversary edition is inspired by the 1969 Pontiac Firebird, while the Outlaw Edition is inspired by the 1979 Pontiac Firebird. For passionate fans of the Pontiac Firebird, Burt Reynolds’ Pontiac Firebird in the “Smokey and the Bandit” movie will be forever etched in memory.
Is the new Pontiac Firebird based on a Camaro?
The modern Firebird may be based on the Chevy Camaro, but after all the upgrades, it is a much more powerful car. A lot of power has been added to the original 6.2-liter V8 engine of the Camaro to make the new Pontiac Firebird a sure contender to become the new king of the drag strip.
What kind of car is the new Pontiac Trans Am?
The new Trans Am will be a reworked Chevy Camaro SS that will also be extensively changed stylistically to look like a Pontiac Firebird. More than 380 parts will be modified, including the bumpers and the taillights.
What was the vacuum schematic for a 1967 Firebird?
Fig. 3: Vacuum schematic for the dual acting distributor system 1967-69 models Fig. 4: Vacuum schematic for the dual acting distributor system (continued) 1967-69 models Fig. 5: Vacuum hose routing for the TCS system 1970 6-cylinder engines Fig. 6: Vacuum hose routing for the TCS system 1970 8-cylinder engines
Fig. 3: Vacuum schematic for the dual acting distributor system 1967-69 models Fig. 4: Vacuum schematic for the dual acting distributor system (continued) 1967-69 models Fig. 5: Vacuum hose routing for the TCS system 1970 6-cylinder engines Fig. 6: Vacuum hose routing for the TCS system 1970 8-cylinder engines
How tall is the water pump on a Pontiac?
Using a flat object, place it against the face of the hub of the water pump as shown. Measure from that point to the rear of the water pump. This will give you the correct length (or some call it height) for the water pump you need. The early 1969 water pump was 11 bolt and measures 4″. In mid-1969, Pontiac changed to a 4.5″ water pump.
Do you need faster service for Pontiac Firebird?
Need faster service? CALL US DIRECTLY: Due to the COVID 19 shipping times industry wide have become longer due to the slow down in production of many items within our hobby the “F-body” Trans Am & Camaro.
How much does a Firebird power steering box cost?
You save $9.65! You save $9.65! 1967 – 1976 Firebird Power Steering Gear Box, GM Updated Design, 10:1 Fast Ratio 2.75 Turn You save $20.00! You save $20.00!