Can you fix a 1999 Harley Davidson Road King?
IF you find a low mile 1999 and 2000 bike for the right price. THE sure fix is there..
How old is the Harley Davidson Road King?
It’s part of a dynasty that’s been going strong since 1903 Remember, Harley-Davidson has been producing motorcycles for more than 100 years. Therefore, it only stands to reason that the Road King would turn out to be something special.
What does FLHR stand for on Harley Davidsons?
FLHR (letters) are assigned to the “Road King” model. According to “Get Lowered Cycles”: As a general rule when it comes to Harley abbreviations the following three standards apply: 1st Letter: This signifies the engine series. Touring models or bikes are the largest model bike that Harley-Davidson (HD) offers.
Is there a recall on the Harley Davidson Road King?
In 2015, another recall issued by Harley-Davidson targeted its classic Road King model and other models from 2014 and 2015. This recall involved problems with the clutch system which won’t fully disengage. In the report, Harley-Davidson said this is the result of gas bubbles in the master cylinder clutch.
Are there any problems with the Harley Road King?
Like the clutch problems of 2017, Harley struggled with clutch problems in 2014, as well. The 2014 CVO Road King was part of a major recall of 105,000 bikes which were malfunctioning due to clutch failures. The issue caused a series of incidents and 19 crashes were reported, according to Fox Business.
What kind of engine does a Harley Davidson Road King have?
After reinventing their Twin Cam engine, Harley-Davidson was able to convert on the opportunity to redesign the Road King with a 1690cc, six-speed engine. This bike comes with many features according to Top Speed: a six-gallon fuel tank, an anti-lock braking system, and cruise control.
How long does it take for a Harley Davidson Motor to be apart?
The motor may be apart for at least a couple of days, especially if you are sending heads and cylinders out to a machinist. It is important to clean and layout all of your hardware and parts in such a manner that you will be able to easily identify and remember order of reassembly.
How to do a Harley top end overhaul?
Harley top end overhaul is a lengthy procedure on your Twin Cam motor. Follow Mike’s instructions and refer to your service manual. You will see that a lengthy job does not necessarily make it a difficult job. By taking your time, focusing, working clean and orderly, you will find yourself moving right through this detailed repair or upgrade.
What to do with a used Harley Davidson Road King?
THE sure fix is there.. NEW style cam BEARINGS (ALL) cam support plate, better chain, different type of tensioner along with a good replacement oil pump ,,, can be had as a KIT from harley. this improvement came on 06 dyna’s and ALL 07’s and up, with a 96 cu. in. motor and a 6 speed tranny…..
How to watch Road King custom Luckys on YouTube?
If playback doesn’t begin shortly, try restarting your device. An error occurred. Please try again later. (Playback ID: ypSNbJyG-CUGKcMJ) Videos you watch may be added to the TV’s watch history and influence TV recommendations.
When was the last Harley Davidson Road King built?
LIKE exam. jan 01,2000…. It is a good one, the second 1/2 of 2000 model year had the FIX installed on the cam bearing problem… ALL BIKES- twin-cam engines (regardless of model) built 1999 model year including the first 1/2 of 2000 model year, build date (dec. 15,1999) had the “potential” problem with the cam bearing coming apart..
IF you find a low mile 1999 and 2000 bike for the right price. THE sure fix is there..
Is the 2003 Road King Anniversary Edition flhrci?
2003 ROAD KING 100th ANNIVERSARY EDITION Job changes and a move mean this baby needs to find a new home. I simply don’t have time to ride it anymore…. 2003 Road King Anniversary Edition FLHRCI. Yes fuel injected Low miles 41,000. Lots off chrome and too much to list, but the pictures show it all. S…
What kind of bike is the 2003 Harley Davidson Road King?
2003 HARLEY-DAVIDSON FLHRCI ROAD KING ANNIVERSARY, Super clean and heavily upgraded 100th Anniversary Road King with fuel injection finished in the re… 2003 Harley-Davidson® FLHR – Road King®, 2003 Harley-Davidson® Road King®
What to do if you lose your key on a Harley Davidson?
Remove ignition lock or secondary lock (helmet or gas tank or seat lock) take it to a locksmith and they will make you a key. Bring your title into harley dealer they can cut you a key or get you a key code that a locksmith can use to make you your key.
Is the Harley Davidson Road King a vintage bike?
Just because the bike looks like a vintage design doesn’t mean that it operates like one, not by a long shot. In fact, this motorcycle incorporates all of the latest technology, far more than most people would expect to get with any motorcycle. 4. It features electronic fuel injection
Why does the Harley Davidson Road King have electronic fuel injection?
One of the pieces of technology that Harley-Davidson employed for the Road King is electronic fuel injection. This accomplishes several different things. First and foremost, it provides an avenue for the motorcycle to have more power than it would otherwise. It also allows it to operate more smoothly.
What to do if your bike won’t start?
Your battery may have enough charge to run the electronics, the fuel pump even, but not enough to turn over the motor. With a digital multimeter, test the battery’s voltage. If is isn’t reading over 12V, you’re under charged and it’s a good place to start. Plug in your battery charger, and come back in an hour to try again.
Why does my Dyna FXDC bike not start?
Alarm, clutch inhibit & neutral safety all come from the TSSM. The TSSM controls the start relay. 09 Dyna FXDC, got power everywhere. Lights,Horn,Turn`s,Fuel Pump,Dash, Turn the key on, hit the run/stop switch, push the start button and Nothing. Not even a click or a buzz. Bike has been sitting for about 2 weeks.
Your battery may have enough charge to run the electronics, the fuel pump even, but not enough to turn over the motor. With a digital multimeter, test the battery’s voltage. If is isn’t reading over 12V, you’re under charged and it’s a good place to start. Plug in your battery charger, and come back in an hour to try again.
What should the Cold idle be on a bike?
Start the bike and adjust the cold idle so it is between 1200 and 1300 rpms. You must do this fairly quickly because as soon as the engine begins to warm, it won’t work accurately.
LIKE exam. jan 01,2000…. It is a good one, the second 1/2 of 2000 model year had the FIX installed on the cam bearing problem… ALL BIKES- twin-cam engines (regardless of model) built 1999 model year including the first 1/2 of 2000 model year, build date (dec. 15,1999) had the “potential” problem with the cam bearing coming apart..
THE sure fix is there.. NEW style cam BEARINGS (ALL) cam support plate, better chain, different type of tensioner along with a good replacement oil pump ,,, can be had as a KIT from harley. this improvement came on 06 dyna’s and ALL 07’s and up, with a 96 cu. in. motor and a 6 speed tranny…..
In 2015, another recall issued by Harley-Davidson targeted its classic Road King model and other models from 2014 and 2015. This recall involved problems with the clutch system which won’t fully disengage. In the report, Harley-Davidson said this is the result of gas bubbles in the master cylinder clutch.
Why does my Harley Davidson make a hard clicking sound?
Clicks when trying to start does not engage. I have a Harley-Davidson 1999 sportster 1200. I get a hard fast clicking sound when trying to start. I Have put the battery on a charger and let it charge overnight. It still does the same thing. Is this a bad battery?
When was the first Harley Davidson Road King built?
ALL BIKES- twin-cam engines (regardless of model) built 1999 model year including the first 1/2 of 2000 model year, build date (dec. 15,1999) had the “potential” problem with the cam bearing coming apart.. “POTENTIAL” meaning many bikes held together not showing signs of a problem.
What kind of cam plate does a road King have?
MY 2000 fxds was a problem child and I DID ALL the repairs on my dime….. all bearings in cams,feuling oil pump n lifters,delkron cam plate,SSgear drive 570 cams. solved that problem… also went with flowed heads manly springs n valves. big bore 95″ and more…
Where can I Sell A 2012 Harley Davidson Road King?
Click here to sell a used 2012 Harley-Davidson FLHR Road King or advertise any other MC for sale. You can list all available Harley-Davidson FLHR Road King bikes and also sign up for e-mail notification when such motorcycles are advertised in the future. Ads with or without pictures are easy to create.
What is the TLE for a Harley Davidson Road King?
TLE FOR FLHRC ROAD KING CLASSIC . parts list catalogue manual → View webpages ( download→pdf→url ) 2008 . Harley Davidson . FLHR ROAD KING . parts list catalogue manual → View webpages ( download→pdf→url ) 2008 .
Where can I find the Harley Davidson Road King repair manual?
FLHRC 96 ROAD KING CLASSIC . parts list catalogue manual → View webpages ( download→pdf→url ) 2010 . Harley Davidson . FLHR ROAD KING . parts list catalogue manual → View webpages ( download→pdf→url )
Where can I buy a Harley Davidson FLHR Road King?
You can list all available Harley-Davidson FLHR Road King bikes and also sign up for e-mail notification when such motorcycles are advertised in the future. Ads with or without pictures are easy to create. Our classifieds are completely free with sections for every country in the world.
How to reset the Check Engine light on a Harley Davidson?
Run/Off switch. In this instance, just as any other time you work on your motorcycle, make sure your motorcycle is on a level surface and firmly on the kickstand. With the engine switch on the off position and the run/stop switch in the run position, push the odometer trip reset button and hold.
ALL BIKES- twin-cam engines (regardless of model) built 1999 model year including the first 1/2 of 2000 model year, build date (dec. 15,1999) had the “potential” problem with the cam bearing coming apart.. “POTENTIAL” meaning many bikes held together not showing signs of a problem.
What kind of idle problem does a road King have?
Rough idle, Carbon fouling the plugs, backfiring, and it sounds like the fuel pump is dumping way too much fuel. It is an 01 Road King with PCM3-USB, Arlen Ness Big Sucker Intake and Wild Pig Slip On’s. Please help!
Are there any problems with a Harley Davidson Road King?
Problem today: there are still a lot of bikes of those years (built date on bike frame) out there that have NOT had a problem YET or NOT been repaired by the owner before coming apart…. BE CAREFUL MY 2000 fxds was a problem child and I DID ALL the repairs on my dime…..
What are the diagnostic codes for a 2003 Road King?
Discussion in ‘ Touring Models ‘ started by Dennis, May 6, 2007 . Trying to help a guy with a “check engine” lite on a 2003 Road King. My Touring Model Diagnostic Manual is for a 2005 RoadGlide…….and appears to be somewhat different in the way the test is run and the codes it spits out.
Can you install handle bars on a Harley Davidson Road King?
Installing handle bars on a Harley Davidson Road King can be intimidating, but with patience, any one can do this upgrade in their garage. This video will take you through the process to remove your stock bars, route internal wiring and mount your new bars. Loading…
What are the problems with an exhaust manifold crack?
Problems associated with manifold cracks and leaks. There are several problems created with exhaust manifold cracks and leaks. First, hot exhaust gases are now being vented under the hood, rather than being sent downstream through the exhaust pipe. This can damage plastic components in the engine bay.
What are the symptoms of a carburetor manifold leak?
A carburetor manifold leak can display an array of symptoms at different times during the motorcycle’s operation. The engine’s idle speed is usually the first indicator of a manifold leak, preventing the engine from starting or creating an erratic engine idle speed that shifts between 500 to 2,000 rpm.
Where can I buy Harley Davidson Road King parts?
If you’re looking for something a bit more affordable without sacrificing quality, you’ll also find some of the best prices on OEM parts for Harley-Davidson Road King motorcycles on our website. As important as it is to take good care of your motorcycle, it’s also a real drag to have to spend a bunch of time and money getting the parts you need.
Can a cracked intake manifold cause a leak?
A cracked intake can cause your vehicle’s coolant to leak. Under normal circumstances, the coolant is kept in check by the intake manifold gasket. However, if the gasket or the actual intake manifold fails, coolant can get into the engine and cause serious mechanical issues.
How do you remove head gaskets on a Harley Davidson?
You are now stripped down to the heads. You will need a 1/2″ 12 point socket to loosen your head bolts. Break them free with one sharp motion; then continue to loosen evenly in a cross pattern. Lift off your heads and remove the old head gaskets.
Why does the cam chain on a Harley Davidson wear out?
The cam chain system is a vital component in the functioning of a Harley’s Twin-Cam engine. Zeroing in on this specific cam component can make you as a buyer aware of its potentially faulty design. The cam chain system of a Harley is designed with plastic shoes that ride on the cam system. The plastic shoes will eventually wear out due to friction.
Why does my bike start when I turn it off?
Unscrew the ignition module from the bracket and wiggle the wires when the bike is on. If you duplicate the issue, that’s it. That could also be why it starts sometimes and not others. Bc you’re turning the key on and off and it’s “hitting” right or wrong.