Can a 1987 Jeep Cherokee fit a 1987 Comanche?
Any 1987 through 1991 XJ with Selec-Trac (the NP242 transfer case) did not have a front axle disconnect. And, once gain, the rear flares from a 2-door Cherokee will NOT (repeat WILL NOT) fit a Comanche. The Comanche rear wheel arches are both longer and taller than the Cherokee. Engine specs for the 87-90 4.0L are incorrect.
What’s the difference between a Cherokee and a Comanche?
The taillight lenses are different from a Cherokee’s, the wheel flares are the same (as a 2dr Cherokee), hoods are swappable from 84-92 models Cherokee’s (Cherokee’s above 92 used spring-loaded hinges), and all mechanical/electronic parts forward of the firewall ARE identical.
What kind of transmission did the Jeep Comanche have?
During the production life of the Comanche six different transmissions were offered, manufactured by Aisin, Chrysler, and Peugeot. Chrysler provided the aforementioned TorqueFlite 904 three-speed automatic in 1986 models.
When did Chrysler start making the Jeep Comanche?
Chrysler purchased AMC in 1987, and by the 1991 model year adapted their own engine control electronics to replace the original Renix systems used with the 2.5 L and 4.0 L engines. Power and torque in both engines improved as a result, with the four-cylinder having an additional 9 hp and 8 lb⋅ft and the six-cylinder improving by 1 lb⋅ft and 13 hp.
Is the Jeep Comanche a two wheel drive truck?
When the XJ Cherokee-based Comanche (MJ) truck was introduced, it was also available in two- and four-wheel drive. The new two-wheel-drive models shared the front suspension (from the track bar, control arms, ball joints) with four-wheel-drive models.
When did the Jeep Comanche MJ come out?
American Motors’ Jeep designers based the Comanche MJ body, styling, engineering, and drivetrain on the XJ Cherokee, which had been introduced for the 1984 model year.
When did the Jeep Comanche get a grille?
From 1986 to 1987, the Jeep Comanche grille had ten slots in a similar configuration to the 1984-1987 Cherokee XJ, while from 1988 to 1992, this configuration changed to eight slots to match with the SUV.
How big are the rails on a Jeep Comanche?
For strength, the rails were over eight inches deep (top to bottom), much deeper than conventional midsize truck frames (1983 Jeep J-10 full-size truck frame is 6.75 inches at the deepest point). This structure was pioneered by AMC for the 1971 ” Cowboy ” compact pickup prototype.
What kind of engine does a Jeep Comanche have?
For 1987, the 2.8 L V6 (shit motor) was replaced by the new fuel-injected 4.0 L, 242 CID AMC 242 inline-six that delivered 173 hp, 63 more hp than the V6. The new six-cylinder was also more fuel-efficient. The slow-selling turbodiesel was officially dropped at some point during the model year.
When did Jeep stop making the Comanche truck?
The company chose to cancel the Comanche on June 12, 1992, after only a few thousand trucks had rolled off the Toledo, Ohio assembly line. The body comes only in standard size cab model (no extended cabs) with a rear fold down tailgate.
What was the first year of the Comanche?
The “first generation” was introduced in the 1987 model year. This version used a Renault/Bendix (“Renix”) designed, multi-port fuel injection system. The original 1987 model was rated at 173 horsepower at 4,750 RPM and 220 foot-pounds of torque at 2,000 RPM.
Is the bed removable on a Comanche MJ?
All MJs were built as a full unibody design with the body and frame rails tied/welded together as one piece and cannot be removed, however, the rear is a fully boxed frame with the bed bolted to it, making the bed removable. All MJs have solid axles front and rear.
Any 1987 through 1991 XJ with Selec-Trac (the NP242 transfer case) did not have a front axle disconnect. And, once gain, the rear flares from a 2-door Cherokee will NOT (repeat WILL NOT) fit a Comanche. The Comanche rear wheel arches are both longer and taller than the Cherokee. Engine specs for the 87-90 4.0L are incorrect.
What was the top speed of the Jeep Comanche?
It also set a new speed record at 141.381 in a two-way run over a one-mile course at Bonneville. Its peak speed during these runs was 144 mph, an impressive figure not only for truck, but compared to other cars from the era too. Granted, the Comanche used at Bonneville was far from stock.
Can a Jeep Comanche be used as a daily driver?
Some owners will recommend that you replace a handful of parts that are often considered unreliable, but overall the Comanche is a sturdy truck and can be used as a daily driver, even if you’re hauling heavy stuff in its bed. Somewhat unexpectedly for a pickup truck, the Comanche set a few records back in the day.
When did the Jeep Comanche pickup truck come out?
The Jeep Comanche was a compact pickup truck that American Motors Corporation (AMC) introduced in 1985. Based on the XJ-generation Cherokee, the Comanche was produced until 1992. Production of the small pickup truck moved under the Chrysler Corporation in 1987, when the giant purchased AMC.