Are there any problems with the Cummins 47RE transmission?
Get a SNEAK PEEK of the new digital version! If you own a 1994-2002 12- or 24-valve Cummins-powered RAM truck and have had automatic transmission problems, you’re most definitely not alone. The 47RE transmission in these trucks is not a favored transmission among Cummins owners.
Why is my transmission not shifting to fourth gear?
Similarly, if the direct clutch were to fail, the transmission would lose both reverse gear and overrun braking in 2 position (manual second gear). If the transmission will not shift to fourth gear, the control switch, overdrive solenoid or related wiring may also be the problem cause.
Why does my Dodge truck keep shifting gears?
Some describe it has shifting weird & that they don’t know exactly what’s wrong but they know it’s not right. The driver will try & count the gears as the transmission shifts thru all the gears up to highway speed.
What happens when the transmission does not slip in reverse?
If the transmission does not slip in Reverse, the rear clutch is slipping. If slippage occurs during the 3-4 shift or only in fourth gear, the overdrive clutch is slipping. Similarly, if the direct clutch were to fail, the transmission would lose both reverse gear and overrun braking in 2 position (manual second gear).
Why is my transmission not working on my Dodge truck?
Turn on the engine. Listen for a rattling or clunking noise when shifting gears. Because Dodge trucks are subjected to heavy loads, the transmission mounts do wear out over time. Ask a professional mechanic to install new mounts. Check for hesitation during shifting. This is caused by a faulty solenoid and pressure switch assembly.
What to do if your Dodge truck does not shift?
If you are in doubt if it shifted or not, pull the shifter back down to Low. If your Transmission does not shift, proceed to the next step after the transmission cools down. Hot ATF is no fun so be careful. Once the ATF has cooled down so that you don’t get burnt. Drop the transmission pan for a closer inspection of the problem.
What to do if your transmission does not shift?
If your Transmission does not shift, proceed to the next step after the transmission cools down. Hot ATF is no fun so be careful. Once the ATF has cooled down so that you don’t get burnt. Drop the transmission pan for a closer inspection of the problem.
What kind of transmission do I need for a 1994 Dodge 5.9L Cummins?
Put the ultimate transmission in your 1994-1998 Dodge 5.9L Cummins 4WD with the CA Conversions Allison Conversion Kit. Custom Automatic (CA) Conversions has put years of research and development into providing you with the components needed to put a 5 or 6-speed Allison 1000 or 2000 series transmission behind your Cummins.
Can you put an Allison Transmission behind a Cummins truck?
Putting an Allison Transmission behind your Cummins gives you a “Million Mile Solution”. To get a conversion kit for your truck, identify the Allison Transmission you plan on using, and select from the options above to build your CA Conversions Allison Conversion Kit.
What does the ATS 6019472218 signal conditioner do?
The ATS 6019472218 APPS/TPS Signal Conditioner Helps repair and prevent the hunting in and out of lock-up and/or between 3rd and 4th gears. This is done by conditioning the TPS signal which allows the transmission to have better shift characteristics. The factory TCM tune is very sensitive.