Are aftermarket mufflers better than stock?
The mufflers are the parts of the exhaust system that are responsible for reducing the noise produced. Stock exhaust mufflers muffle the sound, whereas aftermarket exhaust mufflers don’t necessarily do that. Some people want their vehicle to sound more aggressive, which aftermarket exhaust mufflers make possible.
What happens when you drive with a bad muffler?
Your broken muffler can reduce the effectiveness of your exhaust system. The broken part can keep your car from being effective when siphoning the exhaust fumes out of your engine and will negatively affect your car engine’s performance. In turn, your car will produce higher emissions and lose fuel economy.
How do you change exhaust system on Harley Davidson?
After the stock exhaust system has been removed, any old components can be transferred to the new system and re-installed onto the bike. Remove the oxygen sensors from the stock exhaust using a 9/16″ wrench and install them into the new system (if applicable). Apply a small amount of anti-seize paste to the threads before installation.
Do you need slip on mufflers on Harley Davidson touring?
A set of slip-on mufflers does not require tuning of the ECM on fuel-injected touring models; however, fueling adjustments are a must if a full system has been installed. Because of the increase in exhaust flow, Harley and exhaust manufacturers warn against riding the bike as a lean air-fuel mixture can occur and lead to potential engine damage.
How do you remove muffler on a Harley Davidson?
Remove the muffler bracket bolts using a 1/2″ socket or wrench. With the clamp loosened and the bracket bolts removed, the muffler can be slid off of the head pipe. Work the muffler off with a twisting and pulling motion.
What’s the difference between slip on and full exhaust system?
A slip-on replaces just the mufflers, while the full system includes the head pipes, crossovers, and of course the mufflers, and sometimes dramatically changes the look of the bike. Installing either starts out the same, but with the slip-ons, you can skip a lot of the middle steps.
How to remove baffles out of Harley stock exhaust?
How to remove baffles out of Harley stock exhaust – If you spent all your money on buying the Harley and want the Harley sound take the baffles out its a lot cheaper then buying slip-ons. Loading…
How can I make my stock exhaust sound louder?
However, the only effective way to make that stock muffler louder is to remove the baffles, this can be done in four easy steps. Coat the rear of the muffler interior with cutting oil. The cutting oil will help prevent smoke and sparks as you remove the muffler’s baffle as well as keep debris from flying around and getting into the headers.
How do you make a muffler on a Harley?
Use a power drill to cut out the baffle, the long cylinder in the middle of the muffler. Attach a drill extension and hole saw to an electric drill. Cut through the end plate surrounding the baffle opening. The baffle is welded onto the end plate at the back of the Harley.
A set of slip-on mufflers does not require tuning of the ECM on fuel-injected touring models; however, fueling adjustments are a must if a full system has been installed. Because of the increase in exhaust flow, Harley and exhaust manufacturers warn against riding the bike as a lean air-fuel mixture can occur and lead to potential engine damage.