Why is there a warning light on my Jaguar XK8?
Taken each sensor off and cleaned, measured resistance etc. Bought a spare sensor off ebay for £7 (instead of the £170 from Jag) and changed each one out individually but still there. Please, any advice would be welcome. Got a feeling it’s not the ABS module and it is sensor related.
Where are the ABS sensors on a Jaguar XK8?
It sounds like it could be the sensors but it could also be the cables so they should be the first check. The rear ones go into the bottom of the boot and are on a bracket near each corner of the petrol tank. The front ones go through the inner wing and are mounted on the wing forward of the suspension mounts. Try doing a continuity check on these.
Why does my XK8 have an ABS warning light?
At first the warning was intermittent ( which suggests no serious prob with ABS pump or throttle body) but now it’s on pretty much all the time. I’ve had the wheels off and cleaned and checked all the sensors. Don’t want to pay for extortionate diagnostics (who does). Is there anything else I can try? Thanks, Evo08
Is there an OBD reader for Jaguar XK8?
So – the light hasnt come on for the last few days, so will leave it for now. yes – perhaps i should get an OBD reader – is there a specific one that does the job thats a decent price? thanks Russ
Why does the ABS warning light come on?
If the ABS Warning Light comes on with the Info display also showing, alternately ” Traction Control Fail ” and ” Stability Control Fail ” it may indicate a failure of the ABS Control Module, this is a known and common fault. The cure is to have the Unit rebuilt at a specialist company, it costs about £150 for repair of this module.
Taken each sensor off and cleaned, measured resistance etc. Bought a spare sensor off ebay for £7 (instead of the £170 from Jag) and changed each one out individually but still there. Please, any advice would be welcome. Got a feeling it’s not the ABS module and it is sensor related.
It sounds like it could be the sensors but it could also be the cables so they should be the first check. The rear ones go into the bottom of the boot and are on a bracket near each corner of the petrol tank. The front ones go through the inner wing and are mounted on the wing forward of the suspension mounts. Try doing a continuity check on these.
How can I rebuild my jagbits ABS module?
We offer a rebuild service which can be purchased on the website under part number ABS-MODULE-REB which means we will rebuild your module and give you a Lifetime Warranty. You will need to ship us your module and 3-4 business days later you will receive the rebuilt module back ready for installation.
At first the warning was intermittent ( which suggests no serious prob with ABS pump or throttle body) but now it’s on pretty much all the time. I’ve had the wheels off and cleaned and checked all the sensors. Don’t want to pay for extortionate diagnostics (who does). Is there anything else I can try? Thanks, Evo08
What should I do about my Jaguar XK8 ABS?
I have 1999 Jaguar XK8. Had same problem with ABS, traction and stability control. Check EBay and found BBA-REMAN selling they repair services. Place starting bid $35.00 on Jaguar ABS module and won. Free shipping and life time warranty.
How much does ABS module cost on Jaguar?
Place starting bid $35.00 on Jaguar ABS module and won. Free shipping and life time warranty. Just received back and after installation all ABS and brake lights disappear. No more traction control, stability control fail messages on the clock. Only Check Engine light was on. Reset light with chip scanner.
I have 1999 Jaguar XK8. Had same problem with ABS, traction and stability control. Check EBay and found BBA-REMAN selling they repair services. Place starting bid $35.00 on Jaguar ABS module and won. Free shipping and life time warranty.
Place starting bid $35.00 on Jaguar ABS module and won. Free shipping and life time warranty. Just received back and after installation all ABS and brake lights disappear. No more traction control, stability control fail messages on the clock. Only Check Engine light was on. Reset light with chip scanner.
Where can I get help with my Jaguar XK8?
Not sure where you are located but if you are local to us (we are in Andover) you are welcome to pop in and put your car through the Jaguar Diagnostic system we have on site. If you get stuck and want any advice, give us a call on 01264 333523 during work hours or on 07704321556 anytime.
Is there a check engine light on a 1998 Jaguar XJ8?
The contact owns a 1998 Jaguar Xj8. The contact stated that the vehicle would stall without warning when driving at higher speeds of approximately 75 mph. The check engine warning light would illuminate after the failure occurred. The vehicle was not inspected or repaired.
Is there an air suspension fault in my Jaguar XJ8 L?
I have an 05 Jaguar XJ8 L that intermittently displays Air Suspension Fault. My local can scan for codes he won’t be able to diagnose them. Am I wasting time and money by not taking the car to someone who specializes in European cars? Any ideas on what is causing the intermittent code? Your air ride will more than likely go out.
How to clear air suspension fault in jagrepair?
1. Park the vehicle on level ground, ensure the ignition is switched ‘OFF’, the steering is in the straight ahead position and the transmission selector lever is in park. 2. Carry out an ignition cycle; engine ‘ON’/key ‘OFF’/ignition ‘ON’/ignition ‘OFF’, to clear the ‘air suspension fault’ message from the message centre. 3.
What is a technical bulletin for a Jaguar?
CONTACT A JAGUAR DEALER TO DETERMINE WHETHER THE BULLETIN APPLIES TO YOUR VEHICLE. Issue: This Technical Bulletin has been issued to aid in the diagnosis of air suspension system faults. Action: The following Service Instruction will assist in diagnosing faults with the air suspension system. Air Leak Diagnosis 1.
Why does my Jaguar XK go into limp mode?
Sensors are there to protect the engine from damage and when they start to fail then limp home mode will always come on. If you can find which one it is that is the start point. I don’t get oily hand any more, but there are several XK owners who know their way round that engine. Peter. You can post now and register later.
Not sure where you are located but if you are local to us (we are in Andover) you are welcome to pop in and put your car through the Jaguar Diagnostic system we have on site. If you get stuck and want any advice, give us a call on 01264 333523 during work hours or on 07704321556 anytime.
Can a Jaguar XK8 run with the header cap off?
When the engine is run with the header tank cap off there are no bubbles but, regardless of everything, after 5 or so miles, the light comes on, I release the pressure and it goes off. I then can drive for 20 plus miles with no problem.
So – the light hasnt come on for the last few days, so will leave it for now. yes – perhaps i should get an OBD reader – is there a specific one that does the job thats a decent price? thanks Russ
If the ABS Warning Light comes on with the Info display also showing, alternately ” Traction Control Fail ” and ” Stability Control Fail ” it may indicate a failure of the ABS Control Module, this is a known and common fault. The cure is to have the Unit rebuilt at a specialist company, it costs about £150 for repair of this module.
How much does it cost to fix ABS light on Jaguar?
Check EBay and found BBA-REMAN selling they repair services. Place starting bid $35.00 on Jaguar ABS module and won. Free shipping and life time warranty. Just received back and after installation all ABS and brake lights disappear. No more traction control, stability control fail messages on the clock.
Check EBay and found BBA-REMAN selling they repair services. Place starting bid $35.00 on Jaguar ABS module and won. Free shipping and life time warranty. Just received back and after installation all ABS and brake lights disappear. No more traction control, stability control fail messages on the clock.
Why does the traction control come on on my Jaguar XK8?
I believe the traction control fault on ignition-on can be due to a low battery because there isn’t enough power to drive the static test. Give the battery a full charge and see if it recurs. I believe the traction control fault on ignition-on can be due to a low battery because there isn’t enough power to drive the static test.
How are the warning lights displayed on a Jaguar?
If a warning message is displayed along with a red warning light (highest priority), investigate the fault immediately. If more than one message is active, each is displayed in turn for two seconds in order of priority. Displayed when the brake fluid level is low. Depending on your location, warning light may be displayed in red letters BRAKE.
When does the DSC light flash on a Jaguar?
Displayed when a fault occurs in the stability control system (Dynamic Stability Control). DSC light will flash when the program is operational and stabilising the vehicle. When the system is switched OFF manually, the warning light in the instrument cluster will be illuminated until the system is switched back ON.
How does the seat belt light work on a Jaguar?
The seat belt sign will come on and a chime will sound if a passenger or driver unbuckles their belt while the car is in motion. The lamp will go out again when the relevant seat belt is buckled. (Note: if you put objects like bags or shopping on the front passenger seat, they may activate the seat belt reminder feature.
I believe the traction control fault on ignition-on can be due to a low battery because there isn’t enough power to drive the static test. Give the battery a full charge and see if it recurs. I believe the traction control fault on ignition-on can be due to a low battery because there isn’t enough power to drive the static test.