Why is the SRS light on my SL500 not working?
The most common fault is the SRS connections under the passenger seat, all the yellow plugs and 1 each side. often just disconnecting the plugs and spraying with a non drying switch cleaner will fix the problem, but once the lamp is on the car usually has to go onto STAR or other to turn the warning off.
How can I Reset my SRS warning light?
It will tell you where the problem is and allow you to reset it once the problem is fixed. Our favorite scanner that will read and reset your SRS / airbag light is the iCarsoft i980 for Mercedes-Benz which will retrieve the SRS light but also the check engine.
What does the SRS light mean on a Mercedes Benz?
What does SRS light mean? SRS stands for Supplemental Restraint System. If this warning light stays on in your Mercedes Benz, that means that there is a problem with the airbags or the components that are part of the SRS system.
How do you remove the SRS dash light?
Quick Fix to remove SRS Dash light. Lightly jiggle a small flat head screwdriver into the seatbelt connectors, then spray electronic connector cleaner (radio shack) inside and let it dry for 20 minutes. Hope it works for you.
The most common fault is the SRS connections under the passenger seat, all the yellow plugs and 1 each side. often just disconnecting the plugs and spraying with a non drying switch cleaner will fix the problem, but once the lamp is on the car usually has to go onto STAR or other to turn the warning off.
It will tell you where the problem is and allow you to reset it once the problem is fixed. Our favorite scanner that will read and reset your SRS / airbag light is the iCarsoft i980 for Mercedes-Benz which will retrieve the SRS light but also the check engine.
What does SRS light mean? SRS stands for Supplemental Restraint System. If this warning light stays on in your Mercedes Benz, that means that there is a problem with the airbags or the components that are part of the SRS system.
What does SRS warning light on dashboard look like?
The SRS warning light on the dashboard usually looks like a side view of a person sitting in a seat with a seat belt on, with a large circle (the airbag) in front of the person.
What does it mean when SRS warning light stays on?
SRS stands for Supplemental Restraint System. If this warning light stays on in your Mercedes Benz, that means that there is a problem with the airbags or the components that are part of the SRS system. It is very unlikely that your airbags are going to deploy randomly, but the concern is that they may not deploy…
Is there a way to reset the SRS light?
You can’t rest the airbag SRS light with a simple OBD II scanner which gives you the check engine light codes. You will need a more advanced scan tool to reset the airbag light. For around $110-150, which is how much a diagnosis costs anyway, you can get your airbag reset tool.
Where is the reset SRS light on a Mercedes Benz?
Reset SRS/ Airbag light. 1. Locate the fuse panel cover and remove it. This is located on the lower left side of the control panel on the driver’s side of the car.
SRS stands for Supplemental Restraint System. If this warning light stays on in your Mercedes Benz, that means that there is a problem with the airbags or the components that are part of the SRS system. It is very unlikely that your airbags are going to deploy randomly, but the concern is that they may not deploy…
What does SRS stand for in Mercedes Benz?
In this video, we will show you how to use the iCarsoft i980 to reset the SRS on Mercedes-Benz cars manufactured after 1996. What does SRS light mean? SRS stands for Supplemental Restraint System.
Why does the SRS light come on on my Mercedes?
We Can Fix It! In the majority of cases when the SRS light is on on your Mercedes, the fault is associated to the passenger seat pad. In the passenger seat there is an electronic pad that sensors whether the seat is occupied and therefore switches the passenger air bag on or off.
Is there a SRS light on the dash?
On my W203 C class 2002 C230 Kompressor Coupe, Manual 6 speed, Audio 20 HU, CDC (added – read later, no other Audio or phone Fiber optics installed), with the basic HVAC control head. And a SRS light on the dash & MFD. Short Summary: Great experience. I scanned thru my OBDII port and found all errors.
You can’t rest the airbag SRS light with a simple OBD II scanner which gives you the check engine light codes. You will need a more advanced scan tool to reset the airbag light. For around $110-150, which is how much a diagnosis costs anyway, you can get your airbag reset tool.
Where is the SRS light on a Mercedes Benz?
This is located on the lower left side of the control panel on the driver’s side of the car. Find the port that fits the OBD cable and plug the scan tool’s cable into this port. 2. Put the key into the ignition and turn it to the “Run” position. This is the position just before the engine starts.
We Can Fix It! In the majority of cases when the SRS light is on on your Mercedes, the fault is associated to the passenger seat pad. In the passenger seat there is an electronic pad that sensors whether the seat is occupied and therefore switches the passenger air bag on or off.
Is there a scanner that reads the SRS light?
Here is a scanner that works with Mercedes-Benz and will rear fault codes and reset the AirBag, ABS and check engine light. Our favorite scanner that for an in-depth Mercedes-Benz troubleshooting is the iCarsoft MB II. Not only does it read the SRS light (Airbag Control Unit) but also every control unit in your Mercedes-Benz.
What was the year of the Mercedes SL500?
216 with everything. 2002 SL500 with everything. 2009 SL500 with everything. Apparently the connections carry so little current that it dosnt take much to loose the current through the connection.
How to remove the SRS light from your car?
Quick Fix to remove SRS Dash light. Lightly jiggle a small flat head screwdriver into the seatbelt connectors, then spray electronic connector cleaner (radio… Quick Fix to remove SRS Dash light. Lightly jiggle a small flat head screwdriver into the seatbelt connectors, then spray electronic connector cleaner (radio… Skip navigation Sign in
216 with everything. 2002 SL500 with everything. 2009 SL500 with everything. Apparently the connections carry so little current that it dosnt take much to loose the current through the connection.
Why does the SRS / airbag light stay on?
Very often the SRS/Airbag light goes on mainly because of a dying battery. But, if the light is on, it will stay on when you install a new battery, until you manually reset it. That is, 2 steps to solve SRS/Airbag light on. Install a new battery; Reset SRS/ Airbag light.
What are the warning lights on a Mercedes Benz?
The following are warning lights and indicators found in vehicles built by Mercedes Benz. Click a link to learn more about each one. They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray), but there are over 40 of them so be patient!
When does the Mercedes Benz SOS malfunction warning come on?
If you don’t have access to the Star Diagnostic Tool you can have your Mercedes Benz dealer perform DTB P-B-82.95/636a, 03/24/2009 Supersedes: P-B-82.95/636 dated Oct. 29, 2008 “Instrument Cluster Message – “SOS TeleAid not Activated”” SRS Airbag Defective Warning could be triggered when the TELE AID malfunction is displayed.
If you don’t have access to the Star Diagnostic Tool you can have your Mercedes Benz dealer perform DTB P-B-82.95/636a, 03/24/2009 Supersedes: P-B-82.95/636 dated Oct. 29, 2008 “Instrument Cluster Message – “SOS TeleAid not Activated”” SRS Airbag Defective Warning could be triggered when the TELE AID malfunction is displayed.
Very often the SRS/Airbag light goes on mainly because of a dying battery. But, if the light is on, it will stay on when you install a new battery, until you manually reset it. That is, 2 steps to solve SRS/Airbag light on. Install a new battery; Reset SRS/ Airbag light.
Is the Red SRS light still on the dash?
Last week I purchased a used SRS module on the internet. The seller listed the vehicles vin number, and it looked to be close in production to my vin. After installing the used SRS module I still have the red SRS light on the dash. Tried turning the steering wheel left to lock and right to lock 5 times, SRS will not turn off.
Are there any issues with the Mercedes SL55 AMG?
Perhaps the most common issue on the SL55 AMG revolves around the ABC suspension, this isn’t just specific to the SL series but any other Mercedes that shares the same components until it was addressed after 2007 with the introduction of ABC II.
When did the Mercedes Benz SL55 Go keyless?
Electrical and mechanical gremlins haunted the SL55 but Mercedes made significant improvements to resolve most issues by 2005. The Keyless Go option in 2003 required a separate credit card to be carried at all times for Keyless Go to work. A dumb afterthought in our book and not worth the trouble.
What kind of car is the Mercedes SL500?
The Mercedes-Benz SL500, part of the SL-Class of roadsters, is a two-door car classified as a luxury grand tourer. The SL500 comes with a variety of features, such as a retractable hardtop. This hardtop is operated by pulling up on a switch to open it, or pressing the switch down to close it. If you cannot get the …
What happens if you open the hardtop on a Mercedes SL500?
If either of these are open, the retractable hardtop cannot operate. Once the lid and cover are shut, the hardtop switch may be used. Start the vehicle’s engine, and let the car run while you open or close the hardtop. The hardtop does not operate if the car’s battery voltage is too low.
What to do if your SRS system is not working?
It stated that if the SRS system had a code stored for either seat belt emergency retractor squib (ETR) and resistance was too high in the electrical circuit (as in your case), then the existing electrical connectors for both seats should be cut-out and replaced using repair kit 230-540-58-05.
What does check engine light on SL500 mean?
A check engine light can indicate a broad spectrum of problems with your 1998 Mercedes-Benz SL500. In some cases you need to pull over immediately to prevent damage while in others you merely need to tighten you gas cap next time you stop in order to reset the service engine soon light.
Are there any problems with the Mercedes SL500?
Table 1. Total number of problems by model year for Mercedes Benz SL500 Model Year Number of Problems 2009 SL500 2 2006 SL500 15 2005 SL500 19 2004 SL500 57
What causes the SRS airbag light to stay on?
Check the belt buckle. The red buckle release on the driver and passenger seat. Loose contact may trigger the airbag light. If the light is triggered it will stay ON and needs to be reset using one of the scanners below. Steering Wheel Clockspring Ring. Can cause the AirBag / SRS light to stay on.
How to reset SRS / airbag light on Mercedes Benz?
Find the port that fits the OBD cable and plug the scan tool’s cable into this port. 2. Put the key into the ignition and turn it to the “Run” position. This is the position just before the engine starts. Look at your OBD scan tool and write down the codes it displays. 3. Check your owner’s manual for what the codes mean. 4.
What should I do if my SRS warning light stays on?
If you are that lucky, you should consider getting the Autel DS708 which covers more vehicles, not just Mercedes-Benz. It allows you to read and diagnose control systems in most cars. You can perform programming and stream sensor data live.
How to resolve SRS warning light fault ( W208 )?
Release the seat covering from around the frame (front and sides only – no need to remove completely) at the base of the seat. Once the cover has been released turn the seat onto it’s back. Lift up the seat cover (front) and expose the seat pad sensor pocket.
Find the port that fits the OBD cable and plug the scan tool’s cable into this port. 2. Put the key into the ignition and turn it to the “Run” position. This is the position just before the engine starts. Look at your OBD scan tool and write down the codes it displays. 3. Check your owner’s manual for what the codes mean. 4.
It stated that if the SRS system had a code stored for either seat belt emergency retractor squib (ETR) and resistance was too high in the electrical circuit (as in your case), then the existing electrical connectors for both seats should be cut-out and replaced using repair kit 230-540-58-05.
How long does the SRS warning light stay on?
While your car will run with this light on, it is important that you diagnose this problem as soon as possible. Under normal operations, when you first turn the ignition and start the car the light stays on for about 5 seconds and then turns off.
How does the SRS warning system work in a car?
SRS Warning System. The SRS system checks the operation of several components in your car such as: Airbags. Airbag control unit. Crash sensors. Emergency Tensioning Devices. Belt force limiters. Child occupancy sensor in front passenger seat.