Why is the knocking more noticeable after a belt change?
Before the timing belt change there was a slight knocking from one of the cylinders. After the belt change the knocking is more pronounced. Q. How concerned should I be that the knocking is more noticeable?
What happens if your timing belt is not replaced?
This may be rare but it can happen if your timing belt is not replaced timely. On some engines, incorrect timing or a snapped timing belt can lead to catastrophic engine damage. In so-called ‘interference engines’, it will mean that the pistons and valves will hit.
What do the numbers on a timing belt mean?
These numbers indicate a standard trade size and will help in identifying the specifics of the cog belt. Also, by being able to identify the manufacturer and/or trade name on the timing belt will assist in the identification process.
How does the new Pirelli timing belt work?
The new tooth profile has improved shear stress resistance, increased power capacity, and reduced noise levels. Pirelli introduced the RPP belt with an indentation at the top of the teeth, to allow local elastic deformation during meshing with pulley, and easier air discharge to further reduce noise levels.
How long does it take to change a timing belt?
As a service provider it is my duty to explain this concept to you the consumer. Many times it is a 4 or 5 hour job to change a timing belt, by not doing the job right and replacing all of the tensioners, idler pulleys and the water pump at the same time puts you, the consumer in harm’s way.
Before the timing belt change there was a slight knocking from one of the cylinders. After the belt change the knocking is more pronounced. Q. How concerned should I be that the knocking is more noticeable?
These numbers indicate a standard trade size and will help in identifying the specifics of the cog belt. Also, by being able to identify the manufacturer and/or trade name on the timing belt will assist in the identification process.
How to reinstall timing belt and water pump replacement?
Reinstall the timing belt guides with a clearance of 0.5-1.5mm. 27. Reinstall the crankshaft pulley and rotate the crankshaft several revolutions to make sure your timing is correct and there are no solid stops. Don’t force it if there is as your valves are hitting each other or the piston.