Why is the Hatch button on my Nissan not working?
When I press the button ON the hatch to OPEN the hatch, it UNLOCKS the hatch and pops open, but does not open all the way, like it does when I press the hatch button on my remote, which is used to do. Sounds goofy, I would get it to the dealer for a good ole warranty repair!
What should I do if my rear hatch button is not working?
Close all doors, go back close to the hatch button and using the remote , lock the car and then unlock the car. you should hear a sound from the actuator locking and unlocking the lock on the rear hatch! If you don’t hear this, your actuator is inop.
Where is the button to open the hatch?
A few days ago, the button that opens the hatch (located above the license plate) stopped opening the hatch all the way. When we push it, it unlocks the hatch, but no longer opens it.
Why is the hatch on my Nissan Versa not opening?
I can confirm that the front passenger door lock actuator is the culprit of the hatch not opening. The repair is not difficult at all. Took me half an hour. However, the hatch will only open if the passenger door is open for some reason. It is not tied into the latch.
Why does my versa HB not open the trunk?
I have a Versa 2009 SL HB and the trunk doesn’t open with the keyless entry or using the button latch. Going to try and fix. Can post images and guide but first wanted to get feedback from you guys.
What’s the actuator number on a Nissan Versa?
I ordered that actuator from NissanPartsZone.com, and everything worked again once I replaced it. The part is 80-500-EL01B. It took me about an hour and a half to do. You’ll need to use the service manual, which can be found at this link. The information you’ll need to help you replace the actuator starts on BL-166.
What to do when your license plate screw won’t turn?
The idea is to be pulling out on the screw while you are unscrewing it, hopefully forcing the clip to stick against the wall and allow the screw to “unscrew”. Other than that you can use a dremel to grind off the head of the screw… but you’re going to need to get the other end of the screw and broken clip out at some point anyway.
What happens when you replace your license plate?
I tried to replace my license plate the other day and one of the screws just kept on turning and turning without coming out. Took to the stealership to see what’s up and they said that it’s not worth the money to fix it. The nut or clip broke and they would have to take apart the rear hatch to replace it.
https://www.youtube.com/watch?v=KBTBJsiFqIc
Why is my liftgate not working on my Nissan?
My liftgate will not work. Neither the key fob, button on liftgate nor button on left side of steering wheel will get liftgate to open. No it’s not the power button. Brought to dealer for diagnostic answer. They said it is the liftgate lock actuator.
Where is the liftgate button on a Nissan platinum?
The Platinum has a power liftgate, so you press the button, either down by the driver’s knee, button on the lift gate itself, or on the FOB and the lifegate opens. The OP inadvertently pressed the button that disabled the power liftgate so it only could be opened manually.
How do you open the power window on a Nissan?
• Raise the window to the fully closed position using the manual portion of the power window switch, not the “auto” feature. • Then press in and hold the external button on the power window motor while fully opening the window. • When the window is fully opened, release the button on the power window motor and verify that the button pops back out.
When I press the button ON the hatch to OPEN the hatch, it UNLOCKS the hatch and pops open, but does not open all the way, like it does when I press the hatch button on my remote, which is used to do. Sounds goofy, I would get it to the dealer for a good ole warranty repair!
The Platinum has a power liftgate, so you press the button, either down by the driver’s knee, button on the lift gate itself, or on the FOB and the lifegate opens. The OP inadvertently pressed the button that disabled the power liftgate so it only could be opened manually.
Close all doors, go back close to the hatch button and using the remote , lock the car and then unlock the car. you should hear a sound from the actuator locking and unlocking the lock on the rear hatch! If you don’t hear this, your actuator is inop.
• Raise the window to the fully closed position using the manual portion of the power window switch, not the “auto” feature. • Then press in and hold the external button on the power window motor while fully opening the window. • When the window is fully opened, release the button on the power window motor and verify that the button pops back out.
How do you remove a third row seat from a Nissan Quest?
Park the van in a level place, turn off the engine and activate the parking brake. Open the rear hatch and a side door so you can access the third-row seat from both the side and the rear of the Quest. Using the ratchet and the correct-size socket, remove the four bolts that attach the rear of the third-row seat to the floor of the van.
When did Nissan stop making the Nissan Quest?
In 2000, decisions were made by Ford and Nissan to abandon the joint venture, as both the Windstar and Quest replacements were in initial development and the design process. As a result, Ford made plans to build a Mercury variant on the Windstar (WIN-96) successor’s platform due in 2003 and Nissan on the Altima and Maxima platform.