Why is the fuel gauge empty on my 2001 ML320?

MY 2001 ML320 exhibited the fuel gauge problem today. I filled fuel this morning on my way to work. Soon thereafter, the fuel gauge showed that it was empty despite a complete fillup.

What should I do if my gas gauge is not working?

Note that some self-test steps may stop the gas gauge at 1/4, 1/2, and 3/4, as well. Fuel sender test. The fuel sender test should be conducted when the tank is lower than HALF, to prevent fuel splashing. Start by making sure the plug is clean, dry, and free of corrosion. Make sure the pins are straight and that the connector is fully seated.

Why does my car’s fuel gauge keep resetting?

Electronic and software malfunctions may cause the fuel gauge in your automobile to inaccurately measure or display the amount of fuel remaining in the gas tank. If this happens, reset your fuel gauge. Each make and model of car has its own specific instructions on how to reset the fuel gauge, but the process is basically the same.

Why does my gas gauge keep pegging full?

The gas gauge might interpret voltage feedback from a dead sender as FULL or EMPTY, consequently pegging the gauge no matter the actual fuel level. Circuit Problems can cause the gas gauge to stop functioning normally.

MY 2001 ML320 exhibited the fuel gauge problem today. I filled fuel this morning on my way to work. Soon thereafter, the fuel gauge showed that it was empty despite a complete fillup.

Why is my fuel Gage indicator not working?

Fuel gage level indicator not working. my fuel gauge sometimes is not accurate.I filled the car up with gas and now the gauge is reading empty with the low gas light on?Does anybody know hoe to fix this? To repair this issue you must reset the fuel gauge.

How do you reset the fuel gauge on a Mercedes?

The other is a connector in the driver’s side rear wheel well, where if you diconnect the harness with the ignition off, and you wait a couple of seconds, then the fuel gauge mechanism will be reset. Number one is more practical in my view..

How does the fuel gauge work in a car?

The fuel gauge in your automobile indicates the amount of fuel that remains in the gas tank. Some fuel gauges have an analog display while others have a digital or liquid crystal display. Electronic and software malfunctions may cause the fuel gauge in your automobile to inaccurately measure or display the amount of fuel remaining in the gas tank.

Why is my Mercedes fuel gauge not working?

The sending unit potentiometer (variable resistor) wiper is exposed to fuel and acidity of the fuel will make coating or oxydation on the resistor surface in 1998-2001 MY. Since 2001 I believe Mercedes installed resistance calibration circuit board to help the ECM to count fuel volume for trip computer.

Why does my gas gauge not read linearly?

The side effect of this is that the gas reading is not uniform or linear as you may expect. This is more pronounced only when the tank is full. In my experience, when the tank is in the last quarter, it behaves much more uniformly. MY 2001 ML320 exhibited the fuel gauge problem today.

What to do if your fuel gauge is not working?

You have to cut a hole in the material that covers the compartment in the photo or remove it to access the contacts of the fuel level sensor. The position of the ignition key does not matter when measuring the resistance. A new sensor can be purchased from Parts.com – For every part of your life . Click to expand… Mr. Bob.

How does the fuel gauge work on a Mercedes Benz?

I would check the fuel level sensor that Chris mentioned. The sensor is a variable resistance inversely proportional to the level of fuel and ranges from roughly 5 ohms (empty) to 70 ohms (full). You access the contacts of the sensor by removing the cover shown in the picture.

What is the resistance of the fuel gauge?

The sensor is a variable resistance inversely proportional to the level of fuel and ranges from roughly 5 ohms (empty) to 70 ohms (full). You access the contacts of the sensor by removing the cover shown in the picture.

Why does my Mercedes Benz R350 not light up?

The bulb did not light up (although I have noticed before I found the browned out bulb that the light would either be dark or slowly come on with a dull glow from time to time when I was following the R350). Took it to the dealer and they said it was a bad bulb and replaced it.

Why is the fuel gauge not working on my Mercedes?

if you fill up the vehicle while engine is running the fuel gauge works, as soon as you start driving the fuel gauge starts dipping down eventually to empty (when it clearly has well over 3/4 of a tank) and the light comes on. ml320-2000 gage in car does not move off 0. I tried testing the fuses Fuel gauge never reads more than 7/8 full.

What should my fuel pressure reading be on my Mercedes?

Set you digital multimeter to 20-volt setting and connect it to the two main (black and red) lines going into the fuel pump. Turn the key to position II and look at the reading. You should get around 11-13 volt reading. Note that when you turn on the ignition, the fuel pump gets voltage for about 5 seconds to prime the system.

Are there any problems with my Mercedes ML 320?

Low range light flashing. Power steering problems. Will need power steering pump replacement. Door lock actuators also tend to be prone to failure. Plastic trim inside the car break easily. Window regulator. Fuel pump. Oxygen sensors. Alternator may need replacement between 130k and 170k miles.

Is there a warranty on a Mercedes fuel pump?

Mercedes like it even today, still selling fuel pump assembly for big $ instead of just the fuel sending unit by itself, FYI part No. A163 470 01 94 Some of them replaced under warranty, but very few compare to number of 163 MLs manufactured. Mine is just not showing full on fillup, usually 3/4 or 7/8 max., in 3 years, I got used to it.

Why does my fuel gauge go off when I go up hill?

When it is full, but registering empty, accelerating and decelerating will cause the warning light to go on and off. Sometimes it seems going up or down hill will do the same thing. When it is not working, disconnecting the battery and reconnecting will fix it until the next fillup.

When does the gas Gage indicator come up?

Fuel level does not indicate level when you first put gas into tank. I have to keep tank on full so that I can mentally keep up with miles if I do not fill tank up. The gas gage will come up eventually, you just don’t know when it is going to happen.

Why does my low fuel light keep flashing?

If your low fuel light is flashing on your fuel gauge…the problem is 1 of 3 things, with 1 being the most likely.. a loose fuel cap..the second possibility is overfilled fuel tank which will cause raw fuel to get into the evap system…the 3rd possibility is rapid loss of fuel/ fuel tank leak follow me on twitter https://twitter.com/fupabox

What to do if your gas Gage goes to zero?

The gas gage will come up eventually, you just don’t know when it is going to happen. Check engine light turns on and my fuel gage will flash low even at 1/2 tank? If I fill tank gage will go to zero. After driving 50 miles or so gage will register correct level. Solution try not to fill tank and live with it.

What does it mean when your gas gauge is not working?

You may automatically assume that the issue is with the fuel gauge itself, but most of the time this is not the case. One thing is for certain – driving around with a non-functioning gas gauge is a challenge and one that many folks have done – resetting your trip odometer, and tracking gallons and miles gets old very fast!

Why does my fuel gauge go off when I fill it up?

When I fill up it does not register the fillup and runs the fuel level down to the gauge peg. Sometimes, out of the blue, it will work. Fill it up and it works until the next fillup, when it breaks. When it is full, but registering empty, accelerating and decelerating will cause the warning light to go on and off.

Why does the warning light go off when I fill up the gas?

Fill it up and it works until the next fillup, when it breaks. When it is full, but registering empty, accelerating and decelerating will cause the warning light to go on and off. Sometimes it seems going up or down hill will do the same thing.

What happens to the engine when left in idling position?

When the engine is left in idling position, it maintains a steady but low rate of revolution approximately 1,000 RPM. The RPM needle stays constant, and this indicates that the vehicle’s engine is receiving the correct amount of air and fuel.

What causes a car to idle rough at idle?

A clogged fuel filter stops the engine from receiving the right amount of fuel causing the engine to be rough idle. Fuel filters are often pretty cheap, and you can easily get the fuel filter removed and replaced from a nearby mechanic or do it yourself if you have some knowledge. 6. Dirty Air Filter

Can a bad fuel gauge sender send a bad signal?

Another, less common, symptom of an issue with the fuel gauge sender is a fuel gauge that is stuck on full. A faulty fuel gauge resistor can send a bad signal to the instrument cluster which can cause the gauge to permanently read full. This is an issue, as the driver needs to know the accurate fuel level of the vehicle as to not run out of fuel.

What do I do if my gas gauge is not working?

In most cases, to gain access to the fuel tank sending unit mount / fuel pump mounting hole, you’ll need to drop the gas tank down. Be sure to do this when there is either minimal gas in the vehicle, or it’s been siphoned out.

How much fuel does a Mercedes Benz ML 350 use?

Mercedes-Benz ML 350 it is a SUV. Car engine capacity: 3724 ccm (226,10 cubic inches). Car max power: 235.00 PS (172,14 kW or 230,84 HP) at 5750 Rev. per min. Car fuel: gasoline, unleaded 95. Car fuel with highway drive: 13.1 litres/100 km (17,91 miles per gallon). Car fuel with mixed drive: 14.7 litres/100 km (15,92 miles per gallon).

What happens when you run low on gas?

This typically isn’t a huge issue, because it settles to the bottom of the tank. But when you run low on gas, the likelihood of that sediment getting drawn in by your fuel pump increases. This can clog the pump’s fuel filter, which will slow the flow of gas to your engine.

Running low on fuel can also cause the fuel pump to pick up sediments, which clog the fuel filter, fuel injectors, or high pressure fuel pump. If your gas gauge isn’t working, it’s important to identify the source of the issue, then make a plan for repair.

What causes check engine light on Mercedes Benz?

Fortunately Mercedes-Benz of Houston Greenway is here to help you figure out what might be wrong, and what your next steps should be. Below we have highlighted the most common causes of a check engine light. Loose Gas Cap: Your gas cap is loose, broken, or simply missing.

How long does it take to change a fuel filter on a Mercedes ml430?

Mercedes ML430 ML320 Fuel Filter Replacement – YouTube Changing your ML430/320 fuel filter can be an easy process. Follow my simple instructions. The procedure will take about 1 hour for semi skilled home mechanics. Changing your ML430/320 fuel filter can be an easy process. Follow my simple instructions.

Why is my fuel gauge not showing full FillUp?

Mine is just not showing full on fillup, usually 3/4 or 7/8 max., in 3 years, I got used to it. The sending unit potentiometer (variable resistor) wiper is exposed to fuel and acidity of the fuel will make coating or oxydation on the resistor surface in 1998-2001 MY.

Where is the fuel tank door located on a car?

The fuel tank door moves on a hinge, which is mounted to the body, usually found on one side or the other of your trunk. When you open the fuel door, a spring helps keep it open. Some swanky automobiles use a cable to pop the fuel door open when you pull a lever inside the vehicle.

What happens if fuel door doesn’t open?

A fuel door that won’t open, on the other hand, will make putting gas or diesel fuel in your tank a hassle. The fuel door or its hinge or spring can corrode over time. It can also get bent out of shape in an accident. A fuel door cable can wear out and eventually snap.

What happens when your fuel gauge is stuck on empty?

When the fuel gauge is stuck on empty, you do not get an idea of how much fuel is there in the fuel tank, and you may run out of fuel anytime. The most obvious symptom of a stuck fuel gauge is that the fuel indicator does not move, even if you fill several liters of fuel in the fuel tank.

What does it mean when your fuel gauge is empty?

If you just filled up and your fuel gauge still shows empty, you know there’s a problem somewhere. The tricky thing is: It’s not necessarily the fuel gauge. Conversely, the gauge might show full even when you’ve driven 300 miles. That would be nice, but it’s a sign that something is wrong.

How does a fuel pump work on a gas gauge?

The fuel pump module includes the fuel sending unit, used by the gas gauge to detect and display fuel level. https://www.flickr.com/photos/3ndymion/33556245572. The gas gauge is a relatively simple circuit, but its simplicity means each component is essential to its function.

Where is the fuse on the fuel pump?

There are two workarounds if you don’t want to continue changing fuel pumps which come together with the senders. 1.- There is a fuse that you can inline with a switch to it, so that whenever you fill up your tank you just flip the switch and it will reset. The fuse is in the passenger compartment fuse box.

Where is the fuel pump on a 2005 Mercedes SLK350?

Location of the fuel pump and fuel tank on the 2005 Mercedes SLK350 – Answered by a verified Mercedes Mechanic We use cookies to give you the best possible experience on our website. By continuing to use this site you consent to the use of cookies on your device as described in our cookie policyunless you have disabled them.

Where is the fuel pump on a 2005 Mercedes?

Remove Fuel PumpRemove Fuel Tank Top CoverRemove Fuel FilterRemove Fuel Level Sensor Marty, Mercedes Technician Category: Mercedes Satisfied Customers:57,141 Experience: Bosch Certified Master Tech. Over 35 years experience. Verified Marty and 87 other Mercedes Specialists are ready to help you Ask your own question now Was this answer helpful? Yes

What’s the fuel pressure on a Mercedes Benz?

A great and affordable gauge that we have used in the past is this Actron Fuel Pressure Gauge which works on Mercedes-Benz cars. Turn the engine off and connect this gauge to the Schrader valve test port shown in the picture below. Start the car and you should be able to get around 60 psi.

Where is the fuel pump on a 2005 Toyota Prius?

Hi, the fuel pump is inside the fuel tank on this model. The fuel tank is located at the front section of the trunk. I’ve attached some information for the removal of the fuel pump below.

Why is my fuel gauge not working properly?

It’s probably the fuel sender…it’s built into the fuel filter in the gas tank IIRC. As for the workarounds, you don’t need to disconnect the battery for resetting the fuel gauge reading system. There are two workarounds if you don’t want to continue changing fuel pumps which come together with the senders. 1.-

Where is the fuse for the fuel gauge?

The fuse is in the passenger compartment fuse box. You need to search on the old posts for the location details. 2.- The other is a connector in the driver’s side rear wheel well, where if you diconnect the harness with the ignition off, and you wait a couple of seconds, then the fuel gauge mechanism will be reset.

What should I do if my fuel Gage goes to zero?

If I fill tank gage will go to zero. After driving 50 miles or so gage will register correct level. Solution try not to fill tank and live with it. Dealer says fix is up to $1800

Can a Mercedes-Benz Fuel Level sender be replaced?

Over time, corrosion can build up on the sender’s electrical components. This results in the gauge registering incorrectly. Replacing the fuel level sender on the Mercedes-Benz W210 is an easy job provided you take the time to make it a safe job. The first step in replacement is to prep the car.

How many gallons of gas can I put in my 03?

With our 03 we could never get more than 16 gallons in into the tank if we followed the light, gauge, and distance to empty info. The dealer reset it and we “gained” and addl 1/8 of a tank and could there after fill it with 18 gallons. Perhaps your system needs to be reset.

Where is the reset SRS light on a Mercedes Benz?

Reset SRS/ Airbag light. 1. Locate the fuse panel cover and remove it. This is located on the lower left side of the control panel on the driver’s side of the car.

What to do when your Mercedes goes into limp mode?

You may also get a check engine light if your transmission goes into limp mode. When a Mercedes-Benz goes into limp mode, it only operates in second gear and reverse only. When you put it in gear, you may also feel a bang as transmission engages. The first thing you should try is to check the transmission fluid level.

How does the service indicator work on a Mercedes ML320?

Every model year of the Mercedes ML320 is equipped with an on-board computer that tracks driving and engine conditions to determine when service would be needed, such as oil changes. When the computer does determine that service is needed, an indicator message appears on the control panel.

When was the first Mercedes-Benz service Minder light reset?

2007-2011 Mercedes-Benz M-Class Service Minder Light Reset (ML320) – The M-Class was first introduced in 1997 as the Mercedes-Benz W 163. It is the first SUV from Mercedes-Benz. As is typical for SUVs, the M-Class has a high towing capacity, making it particularly suitable for pulling heavy trailers.

When to reset AD blue Def fluid reset?

That low AdBlue (Diesel Exhaust Fluid or DEF) indicator doesn’t require hard SDS reset. If after refill the low AdBlue warning does not come off is 1/2/3 drive cycles – then from ML totally off turn the ignition to position 1 (on, but not cranking) for over 30 secs – then turn ignition off – if Keyless Go pull the button and use the key.

How do you reset the odometer on a Mercedes?

Press the trip odometer reset button twice within one second. This must be done within four seconds of moving the ignition to the “II” position. This causes the car to enter reset mode.

Why does my gas gauge go from full to empty?

This will send the crazy signal to the fuel gauge. This would be the time you see the gauge going from full to empty on it’s own, or usually after you fill up your vehicle it will act up from the sloshing around of the gasoline. This can get quite annoying, and will leave you not knowing how much fuel you actually have.

How does the gas gauge work on a car?

It holds the float assembly along with a resistor board that has small little metal ‘fingers’ that touch the board and send the signal to the fuel gauge to display the proper amount of fuel in the tank.

Where are the fuses on a Mercedes C class?

Fuses 43-63 are located under the hood. Near the hood hinge on the driver’s side. Take a look at the pictures for the exact location.

Where are the fuses located in a Mercedes C class?

Figure 3. Regular and mini size auto fuses arranged by amperage and color. There are three fuse boxes; located in the engine compartment, trunk and cabin as shown above. Use the Fuse Diagram found with the fuses, or attached below, to determine fuse location and amperage.

How do you fix a blown fuse on a Mercedes Benz?

Locate your fuse boxes, and become current with fuse sizes as well as color codes. Conduct fuse testing to find blown fuses. Gain the capacity to replace your fuses, and the potential to insulate yourself from shocking repair bills. This article will help you understand the fuses in your Mercedes-Benz C-Class w204.

To repair this issue you must reset the fuel gauge. 1. Turn the car off 2. Remove the fuse cover inside below the passenger side door. 3. Pull the 15A blue fuse number F5 4. Check it and put it back in 5. Turn on car ignition and fuel gauge has been reset and should be working now.

Why does my gas gauge read full after a fill up?

When your fuel level is full, the electrical resistance at the sender changes, sends the signal to the gauge, and this is what causes the gauge to read as full after a fill-up. Depending on the level of electrical resistance, the fuel gauge changes to reflect the level of gas in the tank.

Navigation