Why is the fan not working on my Jeep Grand Cherokee?

Why is the fan not working on my Jeep Grand Cherokee?

The fan wiring is some of the more vulnerable wiring in your Grand Cherokee. You can test the voltage going from the fan relay to the fan itself. If it is getting 12+ volts, the fan should be coming on. But if it’s not, which means the fan has gone bad.

When does the radiator fan turn on in a jeep?

The radiator fan only turns on once the temperature reaches a certain temperature I believe its about half. But on highway speeds it should run very cool. Your electric fan WILL turn on with your A/C switched on, I was 100% certain it did BEFORE I went out to test it simply so I could say I tested it.

What to do if your Jeep Grand Cherokee radiator is not working?

The first thing that you would want to do is locate the fuse for your Grand Cherokee’s radiator fan and make sure that it hasn’t blown. If it is blown, replacing the fuse will only solve the problem for a very limited period of time. Unless the wiring issue is fixed, the fuse will blow again. The wiring harness itself can go bad.

Why is my radiator fan not turning on?

The fan will turn on after the temperature reaches about half. Usually comes on when the car is standing still due to the small amount of air circulating through the radiator. No the AC will turn the radiator fan on to pull air across the condensor.

The fan wiring is some of the more vulnerable wiring in your Grand Cherokee. You can test the voltage going from the fan relay to the fan itself. If it is getting 12+ volts, the fan should be coming on. But if it’s not, which means the fan has gone bad.

Where is the radiator fan relay on 2004 Jeep Grand?

Where is the radiator fan relay on 2004 jeep grand… Where is the radiator fan relay on… You can’t post conmments that contain an email address. An expert that got 20 achievements. An expert that got 10 achievements.

The radiator fan only turns on once the temperature reaches a certain temperature I believe its about half. But on highway speeds it should run very cool. Your electric fan WILL turn on with your A/C switched on, I was 100% certain it did BEFORE I went out to test it simply so I could say I tested it.

The first thing that you would want to do is locate the fuse for your Grand Cherokee’s radiator fan and make sure that it hasn’t blown. If it is blown, replacing the fuse will only solve the problem for a very limited period of time. Unless the wiring issue is fixed, the fuse will blow again. The wiring harness itself can go bad.

Where is the relay on a radiator fan?

The fan relay is often located in the engine bay’s fuse box, but the best way is to check your repair manual to find where it is located. Testing a 4 pin relay is often very straightforward. Remove the relay and give 12 volts to pin 30 and 85. Ground pin 86 and check if there is voltage coming out from pin 87.

How does the cooling system work on a Jeep Cherokee?

When coolant temperature is below 190*F (88*C) the switch is open preventing the relay from being grounded and the cooling fan from being energized. When the air-conditioning is used the engine ECU grounds the A/C relay coil allowing current to flow through it.

How to check battery voltage in Jeep Cherokee?

Check for battery voltage at terminal 2 of the fan relay connector (Fig. 43). If battery voltage is not present replace the fan diode assembly. With engine running, A/C on, and fan relay removed, check for battery voltage at terminal 2 of fan relay connector (Fig. 43).

Why does my Jeep Grand Cherokee Fan quit working?

In this one we take a stab at permanently fixing a common issue with the 1999-2004 Jeep Grand Cherokee. The electric cooling fan will quit working, and your jeep will overheat, due to a failure in the electronic fan control relay. This is a heat related failure and I add a large heat sink and relocate the relay to try and avoid further issues.

How to install an electric fan in a Jeep Cherokee?

Remove fan retaining screws from radiator upper crossmember (Fig. 41). Disconnect the electric fan connector. Lift fan straight up out of vehicle. Align lower retaining tabs of fan shroud with slots in bracket at bottom of radiator and push fan down into position. Tighten the mounting screws to 4.07 N•m (36 in- lbs).

When coolant temperature is below 190*F (88*C) the switch is open preventing the relay from being grounded and the cooling fan from being energized. When the air-conditioning is used the engine ECU grounds the A/C relay coil allowing current to flow through it.

Check for battery voltage at terminal 2 of the fan relay connector (Fig. 43). If battery voltage is not present replace the fan diode assembly. With engine running, A/C on, and fan relay removed, check for battery voltage at terminal 2 of fan relay connector (Fig. 43).

What should I do if my radiator fan is not working?

A blown fuse is no big deal, and changing one does not cost a lot of money. If your car’s radiator fan is non-functional, check your car’s user manual and locate the fuse for the radiator fan controller or the fan. The fan itself often uses a big fuse of around 50A, while there might also be a separate small fuse to the fan control module.

How to troubleshoot a jeep PWM fan relay test?

Radiator Fan Motor Circuit Wiring Diagram (1999-2003 4.0L Jeep Grand Cherokee). TIP 1: The way I’ve designed the Jeep PWM fan relay test, you’ll need a scan tool that can read live data (not a code reader), since you’ll need to keep an eye on the engine’s coolant temperature with it.

Why is my Jeep radiator not turning on?

The fan will turn on after the temperature reaches about half. Usually comes on when the car is standing still due to the small amount of air circulating through the radiator. Too many mods to list… No the AC will turn the radiator fan on to pull air across the condensor.

The fan relay is often located in the engine bay’s fuse box, but the best way is to check your repair manual to find where it is located. Testing a 4 pin relay is often very straightforward. Remove the relay and give 12 volts to pin 30 and 85. Ground pin 86 and check if there is voltage coming out from pin 87.

What to do if your radiator cooling fan Wont Stop Running?

Remove the lid. Look on the inside of the lid and for the mapping of the fuses and relays with their location. Pull the cooling fan relay out of the box. Replace the cooling fan relay with a new one. A stuck closed relay is the only thing that can operate the cooling fan continuously with the key off.

Why does my car fan keep running after I Turn Off the engine?

Running cooling fans help cool down the engine even after you turn off the car. Common Causes. If your cooling fan runs for over 10 minutes after turning off the engine, you may have a problem that needs to be fixed. Here are some possibilities causing the fan to stay running longer. low coolant level, faulty coolant temperature sensor,

Why is the radiator fan not working on my Jeep Grand Cherokee?

If your Grand Cherokee has a bad engine temp sensor the radiator fan won’t know to come on, because the ECU won’t know how hot the engine is. You’ll need to locate and test the engine temp sensor. Depending on the model year and engine, the location varies. If it does end up being this sensor, they are very affordable.

Remove the lid. Look on the inside of the lid and for the mapping of the fuses and relays with their location. Pull the cooling fan relay out of the box. Replace the cooling fan relay with a new one. A stuck closed relay is the only thing that can operate the cooling fan continuously with the key off.

Why do newer Jeeps have less fan failures?

The newer Jeeps are… newer, and as a result parts are failing a lot less often. I suspect that as they age and parts fail more, this knowledge will become a lot more common.

Why does my Jeep Grand Cherokee radiator not turn on?

When the negative wire is attached to the relay, the relay should have an audible click as it activates. If the relay fails to click, move the jumper wires to the second set of terminals in the event the wrong terminals were being used. If the relay fails to click it is bad. Check the radiator fan switch if the relay proves to be good.

Where is the relay on a Jeep Grand Cherokee?

A Jeep has more than one relay that are the same (go by the relay number on the top or side of the relay) in the fuse box on the driver’s side fenderwell. Remove a known good relay and swap it with the radiator fan relay. Operate the vehicle and check the operation of the unit replaced.

What makes the radiator fan turn on or off?

A radiator temperature-sensing switch activates the fan relay at 198 degrees F turns the fan on and controls its operation. Make sure the key is off. Switching relays is the fastest way to check for a bad relay when possible.