Why is my ignition key stuck on my Saab 9-3?
There are a few easy to fix reasons why your Saab 9-3’s key might get stuck in the ignition. It’s often easy to unstick the key. Whatever you do, don’t start trying to rip it out of the ignition. That can cause bigger problems. This article is written with the assumption that your key is stuck right now, and that you are looking to get it out.
Can you change the gear on a 2002 Saab 9-3?
We have a 2002 Saab 9-3 automatic car. We inserted the key in the ignition and it wouldn’t turn. It’s not possible to change the gear even. Three days back when we drove it, it worked fine. Don’t know what has happened since.
What to do if your car key won’t turn?
Do not force key. Tried turning the steering back and forth with the key in the ignition, but the key simply won’t turn. It’s not even possible to move the gear from “Parking” to Neutral. The gear too simply won’t move.
Why does the key not turn in the ignition?
Tried turning the steering back and forth with the key in the ignition, but the key simply won’t turn. It’s not even possible to move the gear from “Parking” to Neutral. The gear too simply won’t move. Normally you can’t move the shifter from park until the key is turned, so there’s nothing strange about that.
Why is the key not turning on my Saab 9-3?
Saab 9-3 Key Won’t Turn Repair Symptoms. When the ignition switch lock cylinder fails, it can create a situation where the ignition cannot be turned, or takes much wiggling and shaking before it finally turns.
We have a 2002 Saab 9-3 automatic car. We inserted the key in the ignition and it wouldn’t turn. It’s not possible to change the gear even. Three days back when we drove it, it worked fine. Don’t know what has happened since.
Why is my key stuck in the ignition on my 9-3?
Manipulating your 9-3’s steering wheel can unbind the key. Bent – Over time and repeated use, a key can bend. If this is the case, you’ll need to get a new one. This issue often happens with cheap duplicated keys. If you do massage the key out, go ahead and throw it away.
Do not force key. Tried turning the steering back and forth with the key in the ignition, but the key simply won’t turn. It’s not even possible to move the gear from “Parking” to Neutral. The gear too simply won’t move.
Why is my key fob stuck in off position?
Key fob is stuck in off position can’t get it into locked postulation to remove it. not fixed. car won’t start. had to rip the key fob (remote?) out of the ignition. won’t turn back to LOCK, car won’t turn off but also won’t start. just had to leave it there and the battery is now dead. no updates thus far.
Can a key be removed from the lock cylinder?
If the ignition switch is turned to the “lock” position when the vehicle speed is over 5km/hour, the ignition key cannot be removed from the lock cylinder. This is not a defect, but a normal design feature. In order to remove the key: Turn the ignition to the “on” position, wait several seconds, turn ignition to “lock” and remove the key.
Why does my key keep getting stuck in the ignition?
Here are some of the most common reasons why the key would get stuck in the ignition. They are presented somewhat in the order of most likely to least likely to be the cause. All vehicles equipped with automatic transmissions have a lock that keeps the key from being removed from the ignition while the vehicle is in gear.
There are a few easy to fix reasons why your Saab 9-3’s key might get stuck in the ignition. It’s often easy to unstick the key. Whatever you do, don’t start trying to rip it out of the ignition. That can cause bigger problems. This article is written with the assumption that your key is stuck right now, and that you are looking to get it out.
Key fob is stuck in off position can’t get it into locked postulation to remove it. not fixed. car won’t start. had to rip the key fob (remote?) out of the ignition. won’t turn back to LOCK, car won’t turn off but also won’t start. just had to leave it there and the battery is now dead. no updates thus far.
If the ignition switch is turned to the “lock” position when the vehicle speed is over 5km/hour, the ignition key cannot be removed from the lock cylinder. This is not a defect, but a normal design feature. In order to remove the key: Turn the ignition to the “on” position, wait several seconds, turn ignition to “lock” and remove the key.
How do you remove a key from a car?
In order to remove the key: Turn the ignition to the “on” position, wait several seconds, turn ignition to “lock” and remove the key. Key fob is stuck in off position can’t get it into locked postulation to remove it.
What should I do if my Saab FOB is not working?
Check the barrel of the lock is coming up flush with the outer edge, if it is not, DO NOT lubricate with WD40 or similar as this will decrease the friction between the key and the lock barrel, it is the interaction between the key and the lock barrel that pulls the barrel up to the correct position.
What was the Saab 93 Tid 2001 model?
That was on a Saab 93 Tid 2001 model. I think you are worth your fifth star, You certainly solved my problem with an unresponsive remote cental lock. A little wiggling got the barral to rise up into the flush position – and lo and behold, the remote did its business.
Why are my Remote key fobs not working?
Changed the batter on one for a new battery same type, but they still do not work. Reading the manualit says the car display will alert me to when the battery is going flat, I assume if nothing is done about this it goes away, needless to say I was not receiving and have not received the message regards the keyfob battery.
Why is my Remote key not working on my Saab?
There is another issue that could cause this problem, when removing the ignition key from the centre consol, the barrel of the lock should pop up flush with the outer rim of the lock, however in some older cars the barrel does not quite finish its travel and will stop about a 1 mm short of the top.
How to get a key fob for a Saab?
I would prefer a flat key and a key fob (I see plenty of key fobs on ebay). 1) Get one or two of the key fobs on ebay. 2) Get my current key duplicated by a locksmith (just the metal part on a blank they will presumably have and be able to cut). 3) Go to my dealer and get them to marry the key fobs to the TWICE / DICE / Whatever.
That was on a Saab 93 Tid 2001 model. I think you are worth your fifth star, You certainly solved my problem with an unresponsive remote cental lock. A little wiggling got the barral to rise up into the flush position – and lo and behold, the remote did its business.
Changed the batter on one for a new battery same type, but they still do not work. Reading the manualit says the car display will alert me to when the battery is going flat, I assume if nothing is done about this it goes away, needless to say I was not receiving and have not received the message regards the keyfob battery.
I would prefer a flat key and a key fob (I see plenty of key fobs on ebay). 1) Get one or two of the key fobs on ebay. 2) Get my current key duplicated by a locksmith (just the metal part on a blank they will presumably have and be able to cut). 3) Go to my dealer and get them to marry the key fobs to the TWICE / DICE / Whatever.
There is another issue that could cause this problem, when removing the ignition key from the centre consol, the barrel of the lock should pop up flush with the outer rim of the lock, however in some older cars the barrel does not quite finish its travel and will stop about a 1 mm short of the top.
What kind of ignition switch does a Saab 93 have?
SAAB 93 ignition switch (ISM) – YouTube The switch in this video is sticky, however you can do the same if you have ISM related codes or the car does not start due an ISM fault. The switch in this video is sticky, however you can do the same if you have ISM related codes or the car does not start due an ISM fault. Skip navigation Sign in Search
What to do if your ignition switch is stuck?
Step 1 – All vehicles have a steering wheel lockout safety device that will not allow the steering wheel to turn when the key is in the “OFF” position. Step 2 – Vehicles equipped with power steering utilize a pump which maintains pressure while the engine is running.
How to fix steering lock on Saab 9-3?
Put the key in the ignition and take it out for your cockpit lights to turn on and then insert key once again to start the car. I typically wait for the red security light on the dash to stop blinking before starting just to give the car time to process the key. NOT A PERMANENT FIX but works until you can get the problem looked at.
What happens when the ignition lock cylinder fails?
When the ignition switch lock cylinder fails, it can create a situation where the ignition cannot be turned, or takes much wiggling and shaking before it finally turns. Or, it’s… Read More
Where can I find the key to my Saab?
On this page you’ll find an easy way to find the correct key, remote/transmitter, or other key parts for your Saab! NOTE: All orders for VIN-specific cut keys require entering your VIN in the box during checkout and can only ship via 1-Day or 2-Day FedEx Air.