Why is my brake light on in my Jeep Liberty?
Bad Switch: One common reason for the Parking Brake light to stay on is a failing or failed switch. This can be checked easily by jiggling the handle after it is down. If the light turns off (or turns off and then back on), the switch is the most likely culprit and will need to be replaced.
Are there any brake light problems on the Jeep Liberty?
Jeep Liberty owners have reported 16 problems related to brake light (under the exterior lighting category). The most recently reported issues are listed below. Also please check out the statistics and reliability analysis of Jeep Liberty based on all problems reported for the Liberty.
What are the symptoms of a bad brake light switch?
The most common symptom of a faulty brake light switch is when brake lights don’t come on or stay on all the time. A faulty brake light switch can cause many problems. If a switch is bad, the brake lights won’t operate and the transmission shifter will not come out of “Park” position.
Can a brake light switch not be installed?
In many cars, there is a special procedure to remove and install the brake light switch. If not installed correctly, the switch will not operate and can even be damaged. In some cars, the gap between the brake pedal and the switch must also be adjusted.
How do you test the brake light switch?
In some cars, the testing procedure involves testing the voltage at the brake light switch connector when the brake pedal is depressed and released. In other cars, the service manual recommends testing the switch continuity with the pedal depressed and released. If there is no voltage at the brake switch,…
Why is my brake light not working on my 2005 Jeep Liberty?
It would seem that the contact overheats and melts into the plastic housing, causing a potential fire issue and resulting in no contact to make the light bulb work. See all problems of the 2005 Jeep Liberty .
The most common symptom of a faulty brake light switch is when brake lights don’t come on or stay on all the time. A faulty brake light switch can cause many problems. If a switch is bad, the brake lights won’t operate and the transmission shifter will not come out of “Park” position.
In many cars, there is a special procedure to remove and install the brake light switch. If not installed correctly, the switch will not operate and can even be damaged. In some cars, the gap between the brake pedal and the switch must also be adjusted.
Why is my brake light not working after replacin?
If the bulb looks OK, you’ll want to test for power and ground at the bulb. Since the bulbs share more of the same circuit components, lack of power indicates a problem in the power side wiring. No ground would indicate a bad ground connection or a problem with the wiring on the ground side of the circuit.