Why is my backup camera not working on my car?
28 people found this helpful. Most likely the blind spot detection sensor (s) failed, as they tend to do, causing the fuse (M34) to blow. Since the backup camera and backup warning and compass, etc, use that same fuse, this causes those things to stop working.
Is there a problem with my Hyundai Sonata?
I have the same problem with my Hyundai Sonata 2.0T Limited 2012. They just replaced my whole nav unit in the dash but unfortunately the problem persists. I even have a reverberating sound when the A/C is on and the car is in gear. You can’t post conmments that contain an email address. An expert who has achieved level 1.
Why is my backup camera not working on my M34?
So, if M34 keeps blowing when you put the car in reverse, I would suspect something significantly wrong with the camera or backup warning system — that is, power rail shorted to ground (chassis).
What to do if your CarGurus camera is not working?
Replacing or disconnecting the blind spot detection sensors (and replacing fuse M34) takes care of the problem, in this case. See photo of the two failed blind spot sensors from my 2012 T&C.
Is there a problem with my backup camera?
BACKUP CAMERA is dark w/ the borders illuminated. it is intermittant. hyundai is giving me a problem fixing it saying that there is no solution. sometimes when i open and close trunk it starts to work. appears to be wiring problem Clicking this will make more experts see the question and we will remind you when it gets answered.
I have the same problem with my Hyundai Sonata 2.0T Limited 2012. They just replaced my whole nav unit in the dash but unfortunately the problem persists. I even have a reverberating sound when the A/C is on and the car is in gear. You can’t post conmments that contain an email address. An expert who has achieved level 1.
How to fix blank black screen and backup camera update on?
1. If you want to have the backup camera recording, you can download the firmware from the link below. https://www.mediafire.com/?daqw0959bb… 2. If your M6 screen blanks out while the car is in reverse. The link below is the firmware to fix the problem. The main reason to cause the issue is that “Screen Saver” makes the screen blank out.
Why is my camera not working in my car?
If your display is not powering on at all, it’s likely a problem with the display, not the camera, so check the wiring diagrams for your car. (If you installed the monitor yourself, double check your work. Plugging the camera into the AUX dash cable rather than video feed is a common problem with home installs. ).