Why is my 2002 accord having trouble moving in reverse?

My 2002 Accord EX-V6 does the same thing. BUT– I have found a fix. If I move it to Drive for a moment, then back to Reverse, it goes OK. It has been doing this for a few months now (147K miles). I had my mechanic check the fluid and replace it.

Why does my car not shift into first gear?

The signs that the car will show at this time are: The transmission won’t shift and the car makes a grinding sound when the engine is running. Besides, pulling out of first gear will feel harder than normal. The transmission will shift in and out of gear without any issue when the car is not running.

Why does my Honda Civic not move in reverse?

The car is a 1995 Honda Civic. It works fine in reverse but after driving for awhile the transmission starts to slip out of gear into neutral. Mechanic for Honda: JOHN GRETHER, replied 11 years ago Ok, what happens in these is that one of the gears or clutches fails and that causes debris to clog the inlet screen. Then the car won’t move.

Why does my car go forward and reverse at the same time?

The crack would open up when the trans oil was hot (and thinner), so when reverse was selected, it would also engage the forward drive gear at the same time (^ due to pressure bleed). So when forward and reverse are selected at the same time the transmission binds and the car ends up going nowhere fast. The more revs you give it the worse it gets.

What are the Honda Accord transmission not go into gear problems?

Honda Accord owners have reported 113 problems related to transmission not go into gear (under the power train category). The most recently reported issues are listed below. Also please check out the statistics and reliability analysis of Honda Accord based on all problems reported for the Accord.

Can a Honda Accord have a reverse transmission?

That was the case with the 2008 Honda Accord that showed up at our shop one day, coming to us as a sublet from another repair facility. This adds to the challenge, since we didn’t have any direct communication with the vehicle owner. The shop told us that they had replaced the transmission and delivered the car back to the owner.

Why does my Honda Accord have a bad clutch?

This is not a serious issue. However, in automatic transmissions, it can indicate anything from a worn clutch in the torque converter to broken or missing teeth on the planetary gear system that the Accord uses. Have the transmission serviced by a professional mechanic for both issues.

Why is there no reverse ABQ on my Honda Accord?

I noted a P0986 (solenoid ‘E’ control circuit high). With the scan tool still connected for monitoring, I set out for the road. On the road I experienced 2nd gear starts and no converter lockup at highway speeds. Also, as stated, there was no reverse gear engagement.

What happens if a Honda Accord is not towable?

The service manager at my dealership said this; If you tow a vehicle that is not approved to tow and transmission damage occurs, the dealership will determine the cause. If it is determined that the cause was not towing related, the warranty will cover.

How to tow a Honda Accord with toads?

Shift the lever through all the positions (P,R,N,D,2,1). â€¢ Shift to D, then to N. Let the engine run for at least three minutes, then turn off engine. â€¢ Release the parking brake. â€¢ Leave the ignition switch in ACCESSORY (1) so the steering wheel does not lock.

Is there a warranty on a Honda Accord?

If it is determined that the cause was not towing related, the warranty will cover. He also said they have installed many baseplates on Accords without any problems and furthermore, just having baseplates would not affect the determination of warranty coverage.

Are there any problems with the 1998 Honda Accord?

CarComplaints.com Notes: The 1998 Honda Accord suffers from widespread transmission failure, peeling paint, & subframe rust. We recommend avoiding this model year like the plague. Read more » The transmission begins slipping & eventually has to be replaced, typically soon after 100,000 miles & with a repair cost of over $2,000.

Why does my 1998 Honda Accord engine stall?

DETAILED INSTRUCTION ON REPLACE INGNITION SWITCH – The cause for engine stalls and difficult to start is likely due to failed iginition switch. For some of the 1998 Accord, it is covered by the recall.

When do you need to tow a Honda Accord?

Follow the above procedure exactly. If you cannot shift the transmission or start the engine, your vehicle must be on a flat bed truck or trailer. If you tow a Honda/Acura vehicle with automatic transmission, the fluid must be changed every two years or 30,000 miles, whichever comes first.

Why does my Honda Accord not shift into gear?

If your engine will rev up, but the car won’t shift into gear or move it could be a defective torque converter. In fact, the majority of Honda owners with transmission problems are saying the torque converter is failing and essentially burning up the transmission fluid, rendering the entire transmission useless.

When does the Honda Accord shift from first to second gear?

Transmission flares between 1st and 2nd. occasionally between 2nd and 3rd as well. The transmission in my 2000 Honda Accord EX-L V-6 slips when going from first to second gear and slightly from second to third, especially when cold. Sometimes it won’t shift at all and the ‘check engine’ light comes on and the D4 light starts blinking.

Why does my car reverse but not go forward?

The gear cable could be stretched further than the normal length and requires adjusting. The failure of some internal components can be the cause too. The car will reverse but not go forward because of worn out solenoids, clutches, or gears.

Why is my Honda Accord not driving in 4th gear?

The Honda Accord would not drive in fourth gear and acted as it was “slipping”, finally failing to engage in any gear. Vehicle was towed to Ed Voyles Honda dealership, Cobb Parkway, Marietta, Georgia on September 13, 2011 for diagnosis.

What causes a Honda Accord transmission to jerk?

A clogged filter can inhibit liquids and air from going where they’re supposed to go. Low or dirty transmission fluid can cause the transmission to slip or jerk. Check the plugs for corrosion, cracks or gunk. Replace bad plugs.

Why is my p4-p1 having trouble moving in reverse?

P4 – P1 100% transmission fluid is good. The other day I accelerated putting my foot flat on the petrol. After that me neutral is off center. When I shift it up to neutral I have to shift it little bit past neutral like 3-4mm then it takes and when I shift to reverse after about 4-5 secs it kicks hard into reverse.

Why does my Honda Civic Jerk when letting off?

Broken or loose motor mounts can lead to all sorts of erratic vibrations. Lift your Civic onto jack stands, and inspect the motors mounts underneath the engine for cracks, missing nuts, or loose bolts. Some cracks in the motor mount may be hard to see. Insert a piece of paper in between the mounting plate and the frame to check if there is a gap.

Why does my Honda Prelude not go into gear?

The RPM was approaching redline as i was rev matching and letting out the clutch pedal, so i shifted back up right away. then i couldn’t accelerate – the shifter was in gear, but the engine was revving as if it were in neutral.

What causes a car to have trouble moving in reverse?

Two things can be wrong, either your transmission has bad transmission fluid in it or has none, and that will tear up your gears and the second is rebuilding your transmission. This is cheaper than a whole new one and you only repair the injured parts.

Why does my Honda Accord not shift out of Park?

If your Honda won’t shift out of park, chances are the shift interlock solenoid isn’t working properly. Don’t rush out to replace the solenoid just yet. The shift interlock system is designed to prevent shifting out of park unless your foot is on the brake.

What to do if your Honda Accord won’t start?

Usually you need to apply it if your car has problems when you turn off your cars engine for a short period of time and later try to start it while it is still hot.

He tried going again, put the car in gear, the shifter moved, light showing shifter to drive but the car wouldn’t move. Tried a different gear and still would not move. He checked the Transmission Fluid, that was good. Had the car towed.

What did the Honda Accord look like in 1986?

The 1986 Honda Accord kicked off the car’s third design generation with a sleek new look, larger dimensions and more power. The result was an Accord that managed to be both sportier and, in new top-line LXi trim, more luxurious.

Why is my reverse not working on my 4L60E?

Valve Body Issues- A bad valve body can make the reverse gear not work in the 4L60E. If the valve body ends up warped, or if the gasket fails, it’s entirely possible that the gear won’t engage. Booster Valve- A bad booster valve can leave you without reverse in a hurry. Sun Shell- A broken sun shell will cause the 4L60E to lose reverse.

What to do if your car won’t go into gear?

Look into the clutch. The problem could be the result of a stubborn clutch refusing to disengage. The one way of checking it is to start the car after engaging the gear and clutch. If the vehicle stumbles forward, you should take it to a servicing shop.

Why does my car make a loud thump?

light. And while driving loud thump when car motor shifts through RPMs. Take care of the Trac Off and Check Engine lights first. It could be a bad transmission or bad engine mounts causing the thump. 7 people found this helpful. Does it shift really hard?

Why does my car thump when I shift into drive?

Take care of the Trac Off and Check Engine lights first. It could be a bad transmission or bad engine mounts causing the thump. 7 people found this helpful. Does it shift really hard?

What to look for when your Honda Accord gets stuck in Park?

Here’s what to look for if it happens to you. This article applies to the Honda Accord (1990-2002). Honda vehicles are known for their reliability; however, no car is problem-free or lasts forever. A common issue that surfaces on an ageing Accord is the automatic transmission getting stuck in park.

What should I do about my 1998 Honda Accord?

This category covers 1998, 1999, 2000, 2001, 2002 Honda Accord models. Replace the spark plugs on your 98-02 4-cylinder Honda Accord. How can I get the factory alarm to permanently cut off? 2000 honda accord tail and dash lights not working.

How long does it take to recharge Honda Accord AC system?

Recharging the AC system on your Honda Accord is a fairly easy process, that will only take a few minutes. The important things to keep in mind while charging the AC system, are the use of safety goggles, gloves, using the correct refrigerant (R134A), and upon completion, confirming the correct pressure in the system line.

What happens when you change gears in a Honda?

Once the coolant mixes with the transmission fluid, it destroys the transmission bands and requires a complete transmission rebuild. What you may notice when Honda transmission fails: Car jerks when accelerating. Car refuses to move when in gear. Transmission slips when changing gears. Transmission is noisy in neutral.

Why is it when driving the RPM gauge drops or jumps up?

Somewhere the fuel drop then suddenly rpm decrease better check the complete fuel system from tank to injectors also check the rpm sensor . Was this answer helpful? This could possibly be your output speed sensor, related to the transmission.

Why does my car Jerk when I shift gears?

Move the stick into first gear and ease onto the gas pedal while at the same time slowly releasing the clutch pedal. Make sure to perform this transition smoothly, or else the car will jerk really fast. Ease off the clutch and onto the gas when shifting gears. 9. Broken Spark Plugs

Why does my Honda Accord Jerk when I shift to 2nd gear?

For example, when shifting from 1st gear to 2nd gear, you need to let the rpms drop to the corresponding gear speed, and then pull out the clutch. If you pull out the clutch before the revs fall to the correct rpm, the engine will buck. If you wait too long and the rpm is too low, the engine will jerk.

Is it dangerous to have your Honda Accord jerk?

This article applies to the Honda Accord (1990-2002). It can be irritating as well as dangerous to have your engine jerk, especially if it does it intermittently or unexpectedly. This article will go through the solutions (from simple to complex), so you can determine which fix you’d like to apply to the symptoms your Accord is displaying.

Why does my Honda Accord shake and rattle?

A bad motor mount can cause your engine to shake and rattle. Replacing the motor mount is a one and a half hour job. Figure 8: Visably cracked motor mount. Inspect both mounts for cracks, but replace both only if they’re both bad. Honda says this solenoid, if faulty, can cause transmission slippage, which can cause engine jerking.

What kind of torque converter does an Accord V6 have?

These 98-2005 accord V6 are known for tranny probs. Oldturkey should also tell you how many torque converters that he’s seen go bad, because in all my years as a mechanic i’ve never had to replace one. Was this answer helpful? Was this answer helpful?

Why does my car not go into reverse?

If your car wont go into reverse – it’s likely the shift cable needing adjustment.

Why is it having trouble moving in reverse?

So when forward and reverse are selected at the same time the transmission binds and the car ends up going nowhere fast. The more revs you give it the worse it gets. They replaced the main shaft and now the problem is gone. Read more at http://www.honda-tech.com/showthread.php…

If your car wont go into reverse – it’s likely the shift cable needing adjustment.

Why does my Honda Civic make a loud scraping noise?

This article applies to the Honda Civic/Del Sol (1992-2000) and Accord (1990-2002). A brake dust shield rubbing against the rotor is the likely culprit when you hear a loud screeching noise from the wheel area.

What can I do about the scraping sound on my Honda Accord?

Replace and attach brake disk with two screws. Use 17mm socket and ratchet to tighten bolts holding the brake caliper in place. Use 12mm socket and ratchet to connect the brake line bracket. Remove brake dust by spraying rotors, pads, and calipers with cleaner.

What to do if your car won’t reverse?

Upon attempting to back out of her parking stall to begin her drive home after work, the unit failed to engage reverse. She managed to push the car out of the stall, and was able to engage forward gears and proceeded to drive home.

Where did the 2008 Honda Accord come from?

When problem-solving, what you find on the surface doesn’t always tell the whole story. That was the case with the 2008 Honda Accord that showed up at our shop one day, coming to us as a sublet from another repair facility. This adds to the challenge, since we didn’t have any direct communication with the vehicle owner.

Is the Honda Accord CVT certified in California?

1 PZEV (Partial Zero-Emission Vehicle) CVT as certified by the California Air Resources Board (CARB) are available in California and states that have adopted California Zero-Emission Vehicle regulations.

What do I need to know about the Honda Accord?

18 The USB Audio Interface is used for direct connection to and control of some current digital audio players and other USB devices that contain MP3, WMA or AAC music files. Some USB devices with security software and digital rights-protected files may not work. Please see your Honda dealer for details.

How does LDW work on a Honda Accord?

Driver remains responsible for safely operating vehicle and avoiding collisions. 5 LDW only alerts drivers when lane drift is detected without a turn signal in use. LDW may not detect all lane markings or lane departures; accuracy will vary based on weather, speed and road condition. System operation affected by extreme interior heat.

Why does my transmission slip when I change gears?

Transmission slipping, or gears slipping, is one of the most common transmission problems on both manual and automatic transmissions. If you’re experiencing this when you or your vehicle changes gears, not only is it an indication transmission failure is on the horizon, it’s also a real safety risk to you when you’re on the road.

What are the signs of a bad Shift Solenoid?

One of the first symptoms of a bad or failing downshift solenoid is erratic shifting. If the downshift solenoid has any issues, it may cause the vehicle to behave erratically when downshifting. A bad or failing solenoid may cause the vehicle to experience hard or erratic shifting when slowing down or coming to a stop.

Why is my automatic transmission slipping while driving?

Why Is My Automatic Transmission Slipping? If you have an automatic transmission and it “slips” while you are driving it—that is, the car engine revs without the power going to the wheels—the most common cause (though not the only possible cause) is low transmission fluid.

Why is my Shift Solenoid not working properly?

Diagnosis is key when it comes to transmission problems, as various issues can cause similar problems. Trouble with wiring or sensors could be at fault instead. A faulty shift solenoid should be replaced. In some cases, the solenoid is integrated into the valve body and isn’t serviceable.

What causes a transmission to have poor shift quality?

Dirty fluid can cause all kinds of shifting issues because it clogs up small passageways going to the shift solenoids. If the fluid level is low, there’s not enough fluid to fill all these passages, and the transmission lacks pressure internally. This will lead to poor shift quality or no shift at all.

Why does my 4L60E have no reverse?

Slow, slipping or no reverse: “lo-reverse” clutches are worn out, fluid leak in the reverse apply circuit, or broken sunshell.

Navigation