Why does my Vito 109 05 not start?
I have a vito 109 05 plate I. Went on a road trip ..starting running fine ..called at a friends ..about ten mins n then put key in all sounded good turn key engine trying to star but wont any idea’s please people as I have no idea Click to expand… So the starter motor is turning the engine but the engine not starting?
Why did my W639 Vito battery stop working?
Fwiw I only suggested it because an acquaintance of mine was recently stranded after the new (premium brand) battery that he had fitted only a few weeks earlier failed. It was replaced without quibble, but apparently was caused by a ” manufacturing flaw “.
What should fuel rail pressure be in Vito?
Really you need it plugging into STAR to see the Live data of the fuel rail pressure, it needs to be 225+psi to start up! Also this would show if it was camshaft/crankshaft syncronization fault.
What to do if your ZX9 doesn’t start?
ZX9 is correct in what he is saying, Check the o rings on the regulator on the rail, then check the injector leak off of all the injectors. Very rarely the crankshaft position sensor? What do you mean.. the engine turns over but does not start? The starter motor doesn’t work? Did the engine when it did start run smoothly or not at all?
I have a vito 109 05 plate I. Went on a road trip ..starting running fine ..called at a friends ..about ten mins n then put key in all sounded good turn key engine trying to star but wont any idea’s please people as I have no idea Click to expand… So the starter motor is turning the engine but the engine not starting?
What kind of engine does a Vito W639 have?
Thanks for the reply. yeah funny looking plastic key, stays in when you put it in. 2.1l turbo diesel, 5 speed Auto transmission. hi when you first put the key in it makes a noise, 1st position all the dash lights etc come on. next position to start it, nothing. key turns alright, motor does not crank.
Really you need it plugging into STAR to see the Live data of the fuel rail pressure, it needs to be 225+psi to start up! Also this would show if it was camshaft/crankshaft syncronization fault.
Where can I get a new EIS for my Mercedes Vito?
I rang Mercedes parts department in Milton Keynes (Very helpful) and was told a new EIS is 350 sterling. You’ll need a green/orange programming key from mercedes which looks like a slimmed down version of your key but i think its just a usb.
Is there a problem with my Vito long?
Vito Intermittent Starting Problem ! I have a 2004 111CDi Vito Long with 76K miles and have been experiencing intermittent starting problems for about a month. In the morning it starts first time and I can invariably stop and start several times during the day without the problem.
Can a Mercedes-Benz Vito CDI 110 start?
There is no way of priming the van and it is not self priming, as long as the diesel filter is full of fuel the van will start. Is the EDC light on ?. Is the battery good ?. Have you read the codes with a scanner? if so what are they. 1 x 190e, 2 x vito cdi 110 many spares…. still the vito wont start…..
What are the relays on a Mercedes Benz Vito?
CDI, oil sensor, fuel temp sensor,CMP sensor, water temp sensor,rail pressure sensor,Crank position sensor,4 injectors, high pressure pump shut off valve, rail pressure control valve, fuel shut off valve. The only other relays are to do with lights ect ect More Fuel Problems…
Why does my Mercedes Benz Vito not start?
It turned out to be a broken wire to the injector. If the edc light is on then it will not start because it thinks there is a fault either with the wiring, air in the fuel, water in the fuel or lack of fuel pressure. Got my Vito back yesterday.
CDI, oil sensor, fuel temp sensor,CMP sensor, water temp sensor,rail pressure sensor,Crank position sensor,4 injectors, high pressure pump shut off valve, rail pressure control valve, fuel shut off valve. The only other relays are to do with lights ect ect More Fuel Problems…
There is no way of priming the van and it is not self priming, as long as the diesel filter is full of fuel the van will start. Is the EDC light on ?. Is the battery good ?. Have you read the codes with a scanner? if so what are they. 1 x 190e, 2 x vito cdi 110 many spares…. still the vito wont start…..
Can a glow plug light stop a van from starting?
Hi ya and welcome, don’t get side tracked with the glow plug light it will not stop the van starting unless its well below freezing. Look at the clear fuel lines, are there air bubbles in them? There is no way of priming the van and it is not self priming, as long as the diesel filter is full of fuel the van will start.
What to do with a Mercedes Vito camshaft?
Try using easy start to start it one morning give it a spray and then turn it over. if it goes then it could be as simple as the fuel line seals but could also be the fuel pumps. If you need any other help check out Your one stop shop for all your mercedes vito New and Used parts and spares or give me a shout on the number on the site Mark
What should I do if my Mercedes Benz won’t start?
Start the car and you should be able to get around 60 psi. When the engine is running and when you turn off the engine the pressure should stay steady. Always perform this test on a cold engine. Next, make sure that the fuel injector connections are secure and not loose. Check the fuel pump and the fuel pump relay.
Try using easy start to start it one morning give it a spray and then turn it over. if it goes then it could be as simple as the fuel line seals but could also be the fuel pumps. If you need any other help check out Your one stop shop for all your mercedes vito New and Used parts and spares or give me a shout on the number on the site Mark
Why does my Mercedes Benz w638 engine not start?
BUT the other night the engine failed to start (and unfortunately had to get it towed to a friend’s place nearby). It has battery power, engine turns over but does not start. Heard it may be air in the fuel lines as a result of busted o-rings. Also cant find a way to prime the fuel system.
I rang Mercedes parts department in Milton Keynes (Very helpful) and was told a new EIS is 350 sterling. You’ll need a green/orange programming key from mercedes which looks like a slimmed down version of your key but i think its just a usb.
Why does my Vito 115 CDI not start?
I have a Vito 115 cdi. Had it serviced, 59,000km, brought it home no problems. Next day went to start it, put the key in, turned it, and all lights etc came on but would not start, absolutely nothing. Pulled the key out put it back in and it started.
Why does my Vito W639 engine not start?
Pulled the key out put it back in and it started. Over the next couple of days used it a few times no problems. The mechanic had not reset the assyst service system so took it back. Came home no problems. next day went to start all lights, locks etc worked but would not start.
Thanks for the reply. yeah funny looking plastic key, stays in when you put it in. 2.1l turbo diesel, 5 speed Auto transmission. hi when you first put the key in it makes a noise, 1st position all the dash lights etc come on. next position to start it, nothing. key turns alright, motor does not crank.
Is the starter on my Vito van working?
Starter Works Fine And When The Van Was Running It Was Running Fine .it Started To Take A While To Start And This Just Got Worse Over A Few Days Till It Would Not Start At All.
Start the car and you should be able to get around 60 psi. When the engine is running and when you turn off the engine the pressure should stay steady. Always perform this test on a cold engine. Next, make sure that the fuel injector connections are secure and not loose. Check the fuel pump and the fuel pump relay.
Why does my Mercedes Benz W639 engine not start?
The mechanic had not reset the assyst service system so took it back. Came home no problems. next day went to start all lights, locks etc worked but would not start. Called the RACQ (automotive club) and they checked battery etc and found no problems and suggested that it was the immobiliser system.