Why does my tire pressure warning light keep coming on?
If you’ve added air but the air pressure warning light stays on, there’s a problem with your Tire Pressure Monitoring System or you have a slow leak. Assuming there is no leak in your tire, a lit TPMS warning light indicates a problem with a tire pressure sensor.
Why does my airbag light keep turning on?
You have to use a scan-tool and remove the soft-code error to switch it off. Low car battery could trigger the airbag light to turn on. The spring does the job of maintaining the continuity between the driver seat’s airbag and electrical wiring.
What to do when the air pressure warning light comes on?
The Tire Air Pressure Warning Light is On. Now What? If it Comes on While You’re Driving: If you’re driving and the TPMS comes on, pull over to a safe place and stop to check your tires. Unless your tire is completely flat, you’ll want to use a tire gauge to check the tire air pressure in each tire.
How to reset a blinking tire pressure light?
1 Put your vehicle key in the ignition to turn the battery on. 2 Push the TPMS reset button until you see a flashing tire pressure light, which usually appears after approximately three seconds. 3 Start your vehicle. 4 Drive for about 20 to 25 minutes. 5 Turn your car’s ignition off.
Why does my airbag light keep coming on?
The engine and airbag lights are some of the dashboard lights that you need to take a particular interest in. Airbags are designed in such a way that they inflate whenever there is a collision. However, faulty sensors can cause your airbag light to remain continuously on.
Why is the tire pressure light not working?
1. Measuring Tool Not Functioning While every time you start the car and the pressure light turns on and stays lighted, this means the TPMS is not functioning properly. However, before consulting the mechanic regarding this issue, do check the tire pressure. If the tire pressure is fine, the TPMS needs to be repaired. 2. Extreme Cold Weather
How do you reset an airbag warning light?
Once it is off, you have to turn off the ignition within a second. Turn the ignition on again after three seconds. Repeat this process for two or three times and the airbag light will stop flashing. This is the time you’ll know that it is reset. A no cost easy way to reset and fix your airbag SRS warning light.
What to do if your TPMS warning light is still on?
If you’ve checked all your tires (including the spare) and the tire warning light is still illuminated, reset your tire pressure monitoring systems. Some models require the TPMS to be reset every time pressure is added. Instructions for how to reset your tire warning light vary from model to model.