Why does my security light keep coming on?
OR You are driving along, and for no apparent reason, the “SECURITY” light comes on solid and stays on. After you shut down your vehicle, the next time you start your car the SECURITY light is on solid. The problem is usually caused by the Security Module, which is part of the Ignition Lock Module.
What to do when your PassLock security light goes out?
The Body Control Moudle should re-learn the security signal, and the “SECURITY” light should go out. When it does, Turn the ignition OFF for five (5) seconds, and then try to re-start the car. The “SECURITY” light should remain off this time, and the car should keep running. If not, don’t give up.
Why does my GM security light keep flashing?
You try to start your GM car. The engine starts, but dies in one or two seconds, and the “SECURITY”light begins flashing. OR You are driving along, and for no apparent reason, the “SECURITY”light comes on solid and stays on. After you shut down your vehicle, the next time you start your car the SECURITY light is on solid.
What does the security light on a car do?
The security light on your vehicle serves has two purposes. On some vehicles, it will flash when the ignition is off, and the OEM security is activated.
What should I do if my PassLock security light goes off?
If nothing happens or the engine starts and dies, the security light will be flashing. Wait ten minutes. The flashing light should go off or illuminate without flashing. When it does, turn the ignition off, wait twenty seconds, and then try to start the engine. If it starts and runs, everything is okay.
Why does the security light flash when the ignition is off?
On some vehicles, it will flash when the ignition is off, and the OEM security is activated. Its other main purpose is to indicate that the security of your vehicle may have been compromised, and the engine has been immobilized to prevent potential theft. Don’t assume right away that it means someone tried to break into or steal your vehicle.
Why is the security light on on my car?
The security light on your vehicle serves has two purposes. On some vehicles, it will flash when the ignition is off, and the OEM security is activated. Its other main purpose is to indicate that the security of your vehicle may have been compromised, and the engine has been immobilized…
What should I do if my Toyota Corolla security light goes off?
The ten-minute procedure involves trying to start the engine. If nothing happens or the engine starts and dies, the security light will be flashing. Wait ten minutes. The flashing light should go off or illuminate without flashing. When it does, turn the ignition off, wait twenty seconds, and then try to start the engine.
Lights Stay On. Motion sensor security lights are meant to come on only when they detect motion, but sometimes they can remain on all the time. The general reason for this is usually a spike in current, although you may have to deal with a recurring problem if that’s not the case.
How long does it take for security lights to go off?
If not, try turning the lights off at the breaker for around 20 seconds. Confirm visually that the security lights have gone off and then turn the breaker back on. The light will reappear but should go off after a few minutes.
How does Amazon Security lights work on Amazon?
Check out security lights on Amazon. When you turn on the power to your security lights system, the motion sensors are activated and once they warm up, they can detect heat and movements in the surrounding area creating a “protective grid”.
How to reset a security system on a Saturn Ion?
To reset the system, get in the car and shut the door. Turn the key on to the “Run” position without cranking the engine. Leave the key there for exactly 10 minutes. Turn the key to the off position without removing it and back to “Run” for 10 more minutes.
Is there an anti theft system on a Saturn Ion?
But most of today’s vehicles come equipped with an anti-theft system that is integrated into the vehicle’s computers. The 2007 Saturn Ion is one of them. The Ion uses two systems that provide different functions, but for the same purpose: to prevent theft.
How do you turn off the engine on a Saturn Ion?
Turn the key to the off position without removing it and back to “Run” for 10 more minutes. Turn the key off again and back to “Run” for 10 minutes a third. Turn the key off and then attempt to start the engine.
How does the PASSKey System on a Saturn Ion work?
The PASSKEY system uses an exciter coil located inside the key lock tumbler that detects the correct key being inserted and turned to start the car. When the correct key is turned in the cylinder it sends a signal to the computer which will then allow the fuel injectors to function.
Lights Stay On. Motion sensor security lights are meant to come on only when they detect motion, but sometimes they can remain on all the time. The general reason for this is usually a spike in current, although you may have to deal with a recurring problem if that’s not the case.
Why do my dashboard indicator lights randomly come on / stay?
The most common lights are the “fasten seatbelt” light, which will stay on either blinking or solid, even though my seatbelt and that of my passengers is fastened; the “security” “and “service engine” light also come on and stay on together, but not all of the time. Other times, no indicator lights are on while the car is running.
If not, try turning the lights off at the breaker for around 20 seconds. Confirm visually that the security lights have gone off and then turn the breaker back on. The light will reappear but should go off after a few minutes.
How can I check if my security light is working?
You can check this by simply replacing the light, or maybe you want to make certain before buying some expensive halogen or LED replacement light, test the fixture socket with a multimeter. If all is fine, replace the bulb. To test further, switch off the circuit breaker for the security lights.