Why does my Jeep Wrangler keep stalling?

Most stalling problems can be narrowed down to these two areas. Now those are two very wide-ranging categories so we’ll break down the usual suspects that could cause your Jeep Wrangler to stall.

What kind of problems does a Jeep Wrangler have?

One of the most common issues your Jeep Wrangler is likely to develop is a stalling problem. The most challenging part of diagnosing a stalling problem is reproducing the conditions that led to the stall in the first place.

Why does my car feel like it is going to stall?

When you accelerate, the engine RPM increases, and as you let off the gas, the RPM slowly returns to the normal idling speed. However, when the engine RPM drops below the normal range of 800 RPM (for most cars), it is more than likely that you are dealing with an IAC valve problem.

Why does my Dodge Avenger stall when I push the gas?

VVT Problem – Many modern engines are equipped with Variable Valve Timing. This allows for the engine to be in the “sweet spot” of power or economy depending on how hard you are pushing the gas pedal. If there is a VVT issue, it’ll often throw trouble P0010, P0011, or other related trouble codes. This is often the cause of the stalling.

What causes a Cadillac Escalade engine to stall?

If the converter doesn’t unlock, then the engine will stall much like a manual vehicle does when it doesn’t have enough speed to carry a gear. It’ll often throw code P0740. If there is almost no oil left at all, the engine could be on its way to locking up.

Why is my 2005 Jeep Wrangler not starting?

Car Not Starting – Your vehicle does not start or is difficult to start. The engine may still crank but won’t be able to start without vital inputs from the computer. There’s a very common issue with control modules in 2005 and 2006 Jeep Wrangler models.

Is it possible to reflash a 2005 Jeep Wrangler?

The problem with reflashing a 2005 or 2006 Jeep Wrangler, however, is that the post-flash computers have a very high rate of failure once completed, regardless of where you get it reflashed at.

What causes Jeep Wrangler Unlimited to stall while driving?

The details: Issues started at ca. 75k miles suddenly experiencing temporary lack of power which also feels like transmission (automatic) is not shifting. It got worse when engine stalled.

Is there a recall on the Jeep Wrangler Unlimited?

Jeep dealers do not have the knowledge and expertise to resolve the issue nor able to advice the customer what to do. 3. There seems no recall in place nor does Jeep acknowledge any engineering or manufacturing error. 4. This is a very dangerous problem that makes the Jeep a safety issue.

Is it safe to drive a Jeep Wrangler Unlimited?

3. There seems no recall in place nor does Jeep acknowledge any engineering or manufacturing error. 4. This is a very dangerous problem that makes the Jeep a safety issue. It is not safe to drive at all, not for yourself and not for others. 5.

Why does my Jeep Wrangler die at stop lights?

The Jeep would die while I was sitting at a stop light usually. I was never moving when it occurred. The Jeep would idle and it would get to about 4 – 7K RPMs and then just die. I would place car in neutral to restart it and after 10 – 15 seconds it would start right up. I had been experiencing this issue intermittently for maybe 2 weeks.

When did my 2013 Jeep Wrangler engine die?

About a month ago the Jeep died as I was entering the metro parking lot. Wouldn’t start again for 10-20 minutes and after being honked at for a while somebody helped me push it aside. Anyway, it started again and I bought a code reader and there are no codes. It’s been about a month and it died again today while leaving the metro.

Why does my Jeep Wrangler engine not turn over?

U CAN HEAR IT CRANK BUT NOT TURN OVER. I HAVE A APPOINTMENT THIS FOLLOWING FRIDAY AT THE DEALERSHIP BECAUSE OF AIRBAG RECALL BY JEEP CORPORATE. I MENTIONED THE ISSUE.. I HOPE THE FEED BACK AND SOLUTIONS MENTIONED BY OTHERS CAN SOLVE THIS ISSUE. I JUST SPENT 2K ON NEW TIRES, WHEELS AND A 2.5IN LIFT.

Most stalling problems can be narrowed down to these two areas. Now those are two very wide-ranging categories so we’ll break down the usual suspects that could cause your Jeep Wrangler to stall.

Where is the throttle position sensor on a Jeep Wrangler?

Your Jeep Wrangler uses a series of complex sensors to report what is going on to the ECU. The ECU then uses this information to adjust the timing, air fuel mixture, and more. When one of them goes wrong, it can lead to stalling for sure. Throttle Position Sensor – The throttle position sensor is typically located on the gas pedal.

How many miles does a Jeep Cherokee take to stall?

Jeep Cherokee XJ’s and Cherokee KJ’s with less than 25,000 miles have experienced stalling problems, but most cases seem to involve vehicles with 75,000 miles or more on them, and it is with particular reference to these older vehicles that the PCM is most relevant.

Are there any problems with my 2005 Jeep Wrangler?

You can check out any Jeep forum online and see that 2005 and 2006 Wrangler models are notorious for having a host of PCM problems. From the stalling, misfiring, starting, and performance issues stated above, to issues with engine temperature readings and false engine error codes, the headaches are bad and frequent.

Why is my Jeep Wrangler engine not working?

From the stalling, misfiring, and other performance issues stated above, to problems with engine temperature readings and false engine error codes, the headaches that come from a failed PCM are significant – and frequent. There are a variety of reasons why your Jeep PCM might fail.

Why is my Jeep Wrangler PCM not starting?

Engine Stalling or Misfiring – Stalling and misfiring may occur without any pattern regarding frequency or severity. Engine Performance Issues – You’ll notice a reduction in fuel efficiency, power, and acceleration. Car Not Starting – Your vehicle does not start or is difficult to start.

What causes a Jeep Wrangler engine to stall out?

When it asks for a lot of fuel, instead of taking off, it stalls out with the demand. This can be caused by the fuel pump or fuel filter. If your Jeep Wrangler’s engine timing is off, it’s going to stall out, misfire, and altogether not run properly. Here are some of the more common causes of an engine timing problem:

What are the engine codes on a 2005 Jeep Wrangler?

Engine codes P0340 and P0344 Chrysler campaign E05 replace opda and camshaft – my manufacture date is June 2005, there is 113K on the engine, when the weather is cold (40 F or below) the engine has long start issues, there is play in the opda enough to put the engine in limp mode not revving past 2500rpm.

What causes intermittent stalling in a car engine?

More Causes. One of the more unusual causes of intermittent stalling we’ve heard about is a defective vehicle speed sensor. When the vehicle stops moving, the PCM may not engage the idle speed motor (carbureted engines) or idle air bypass motor (fuel injected engines) so the engine will idle normally.

What is the problem with my Jeep Wrangler?

Cap, Rotor, plugs, crank sensor, fuel pump, thermostat, cat converter and transmission. For example, this was happening really bad on and off, then it stopped for a day or two, I then drove over 500 miles through the White Mountains with NO problem, I come home and now this problem is back again and even worse (again off and on but more frequent).

Why does my Jeep Wrangler make a bubbling sound when I hit the gas?

My Jeep sputters, loses accelation and makes a bubbling popping sound when I hit the gas (also my RPMs drop). Sometimes this is accompanied by my check engine light coming on. In the past year I have replaced my:

Why is my Jeep Wrangler sputtering and losing acceleration?

I had about the same problem with my gals 93 Yj, it turned out to be a disconnected hose from the two roll over vent valves on the gas tank. If you take your gas cap off a few hours after driving and don’t get a hiss this could be your problem. Frank Could your fuel filter be bad? These voices in my head are giving me a headache….

Can a Jeep Wrangler slip out of gear?

Not only that, but the Jeep could accidentally slip in and out of gear while driving and cause a wreck. It isn’t worth the risk to save money on a tow bill to cause a dangerous situation on the road.

Is there a recall on the Jeep Wrangler?

In 2009, Jeep recalled several models of Wrangler AT jeeps due to overheating transmissions caused by faulty transmission temperature sensors. For more on that, check out Autoblog. If your Jeep Wrangler falls into this recall, contact a local dealership for possible warranty work.

What to do if your Jeep Wrangler 4WD is not engaging?

Once Jeep owners experience vacuum leaks they simply upgrade to the 4x4Posi-Lock system. The instructions are simple and it’s a DIY job with some basic tools. With the 4x4Posi-Lock system, you never have to worry about your 4WD not engaging ever again.

Why is my Jeep Wrangler not moving out of Park?

See all problems of the 2014 Jeep Wrangler . Vehicle was driven and put into park. When restarted, even though I was able to move the gear shift, the Jeep would not move out of park. One dealership said it coded as the transmission control module and supposedly replaced it along with a transmission flush.

Why is my transmission not working on my Jeep Wrangler?

Instead, the engine revs to 4k, and it will stay in the gear. Only if I let off the gas and allow it to reset, then gradually accelerate will it work properly. The dealership and Jeep have not been able to figure out the issue, having replaced the entire transmission, pcm, and ecu, as well as numerous other parts and sensors.

When did the stalling problem start in my car?

Most stalling problems pertain to model years starting from the mid-1990s all the way to recent model years, and have occurred with virtually every trim level.

Can a Jeep Cherokee stall at high speeds?

There are countless instances of Jeep Cherokees stalling while traveling at low speeds or high speeds, driving straight or losing power in the midst of a turn. While certainly frustrating, these stalls can also have serious consequences.

Most stalling problems pertain to model years starting from the mid-1990s all the way to recent model years, and have occurred with virtually every trim level.

What should I do about my Jeep Cherokee stalling?

A deep dive into actual solutions offered by the most trusted sources, fellow Jeep Cherokee owners like you.

Why does my Jeep Wrangler stall while driving?

It happens randomly, once every few weeks- the latest was a couple days ago. It starts again and after sitting about 5-10 minutes and seems to drive fine otherwise. No lights go off, it just dies and I loose power steering.

Why does my Jeep Wrangler keep running out of fuel?

Another common reason that your Wrangler may be starving for fuel is a bad fuel pump. The fuel pump is responsible for sending highly pressurized fuel to the fuel rails. The engine can die if the fuel pressure is not high enough to properly atomize the gasoline properly.

What is the code for bad valve springs on Jeep Wrangler?

Codes like 12 and 55 can be safely ignored. So after many years and many unhappy jeep Owners complaining about the same issue, jeep finally released a TSB (technical Service Bulletin) addressing the issue of the bad valve springs on 97 models.

Why is my TJ 4.0L engine having trouble?

Once you get past these concerns, any engine problems are either vacuum leaks, “tune” related or engine management (fuel/spark) issues. Your TJ 4.0L engine uses an ignition distributor for the high tension spark delivery alongside an MPI fuel system. The distributor spark timing is fully controlled by the PCM (computer) and its sensor readings.

Why is my Jeep Wrangler transmission not working?

A couple of weeks ago I bought a used Jeep Wrangler (year 2000, 4.0L, automatic, 130k miles), and think there might be an issue with the auto transmission. Here’s the symptoms: · If the engine is cold (and it’s a cold day) then sometimes the transmission won’t engage.

What are the symptoms of TJ automatic transmission problems?

Here’s the symptoms: · If the engine is cold (and it’s a cold day) then sometimes the transmission won’t engage. E.G. Start the engine, move from Neutral to Drive, put your foot on the gas, revs increase, but the Jeep doesn’t move. Rev it a bit higher and drive will engage…

Why does my Jeep Wrangler not start in winter?

Of course, it always happens when you least need it: the engine of your Jeep Wrangler won’t start. Your vehicle, which otherwise reliably gets you from A to B, often lets you down in winter. But why is that?

When does a jeep start to have problems?

If you use a Jeep as a daily commuter, the miles will certainly add up but it would still hold up much better than other cars. The 150,000 mark is where most cars start having major problems. Whether it be mechanical or electrical, problems in the car will start showing up everywhere.

How many miles does a Jeep Wrangler last?

Jeep models are known to last well over 100,000 miles. A well-maintained Jeep Wrangler can last for up to 400,000 miles. Most cars start having serious problems at 100,000 miles.

Are there any recalls on the Jeep Wrangler?

Over 85,000 of the model were recalled and the software was to be updated at no charge to the owner. The Jeep Wrangler 2018 and 2019 recall was due to a faulty weld that could lead to steering problems. The recalls are just 4% of the models and haven’t resulted in injuries or crashes as yet.

Why does my Jeep Wrangler stall without warning?

There is a pin inside your ignition switch that can be responsible for engine stalling without prior warning. One of the parts inside the switch is a metal rod and a link that triggers and sends an electrical signal to your starter motor when cranking. It then retains the key securely and keeps the connection closed within the switch.

What to do if your Jeep Wrangler wont turn over?

OWNER NOTIFICATION BEGAN APRIL 8, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT DAIMLERCHRYSLER AT 1-800-853-1403. To diagnose, you first need to determine if the problem is electrical or fuel related.

Why is the 2004 to 2006 Jeep Wrangler unlimited’lj’is the?

But despite the hot sales, the JK four-door’s aim to appease the masses with its even more voluminous interior came with compromises that have led many Jeep enthusiasts looking for a more practical Wrangler to ignore it, and instead crown the 2004 1/2 to 2006 Wrangler Unlimited, the “LJ,” as one of the most desired modern Jeeps around.

Do you need bump stops on a Jeep Wrangler?

If you have a 2018, confirm that you have a JL or JK. Don’t see your Wrangler Year? Just because you’ve lifted your rig doesn’t mean bumping is something you have no choice but to accept. 1997-2006 Wrangler Bump Stops put an end to the situation so you can spend your time worrying about more important things.

Why does my Jeep Compass stall in the middle of the road?

Coolant temperature shoots up (hot) for 5 -30 seconds then engine stalls. Can’t restart or stalls in the middle of driving. Has happened stationery, in motion, turning, freeway and city streets.

What causes an engine to stall while driving?

If the engine stalls while idling or driving, the engine may be running out of fuel. This could be from not receiving enough fuel pressure to keep it running. The most likely cause of this kind of stalling would be, a fuel pump that is not spinning fast enough; or is intermittently cutting out.

Why does my Wrangler engine cut out while driving?

Got the following problem going on with my ’95 Wrangler and wondering/hoping someone here might have an answer. The engine is the four banger. While driving along, it will suddenly cut out and as I coast hoping for a restart before I get ran over from the rear, it will catch and backfire and then run fine for a bit longer.

Why does my Jeep Grand Cherokee stall while driving?

4.7 cu in. Engine shuts off at low or idle rpms. Starts right back up as if nothing was wrong. Ignition switch replaced under recall but problem continues. m Stalls at idle, while driving. Tuned up, plugs, wires, rotor, cap. Would not start just hear a clicking sound.

What to do if your Jeep Wrangler is stalling?

You ignore a bad OPDA at your own peril, since failure to replace this relatively inexpensive component will result in lack of sufficient lubrication and eventually catastrophic engine failure. The repair is a DIY repair for any hands-on type of person without the need for any special tools.

What kind of engine does a Wrangler YJ have?

Discussion in ‘ Wrangler YJ (1986-1995) ‘ started by Jeepjoc, Jul 19, 2017 . Got the following problem going on with my ’95 Wrangler and wondering/hoping someone here might have an answer. The engine is the four banger.

How many miles does a 1988 Jeep Wrangler have?

1988 Jeep Cherokee w/ 410,000+ miles. Now a 100% Electric Vehicle! Try this. Unplug one sensor and see how it runs if no change then plug it back in and unplug the other. Try starting it again if it changes then you know which one is bad.

What should I do if my Jeep Wrangler is bogging?

If that don’t work pull the sensors and clean the carbon off them. A good mechanic should be able to tell you what sensor is causing the prob. My fuel is good.

Why does my Jeep Wrangler stall when I slow down?

Jeep Cj-7’s and early wrangler YJ’s with 4.2 liter engines came with a rather lowsy carter bbd carburetor which of goes out fo adjustment. One of the most common problems with this carburetor is an erratic idle; in extreme cases (as it was with my jeep) the vehicle will stall every time you slow down or stop.

When did my 1997 Jeep Grand Cherokee start stalling?

So i bought this care a little under 2 years ago. ran like a friggin champ for a year. then the elusive stalling started. its a 97 jeep gc laredo v6. when the problem started it had around 170000 miles on it.

Can a Jeep Grand Cherokee stall while driving?

I can be driving and all the sudden, the Jeep starts to stall by shaking so I need to pull over before the car stalls and no power to the steering wheel… it usually takes about 3 tries to turn over the engine to make it go…

Why does my Jeep Grand Cherokee stop running?

My Jeep will run fine for a week or two, then starts acting up, will not run right, skips and cuts off. It will start back but it takes about 15 to 20 minutes of cranking and waiting before it will start. I have replaced the computer 2 times.

What should I do if my Jeep Grand Cherokee engine stalls?

Several things to add to John’s repair below: shortening the screws doesn’t appear to achieve anything.

What is causing my Jeep to die ( stall ) at idle RPM’s, or up?

WHAT IS CAUSING MY JEEP TO DIE (STALL) AT IDLE RPM’S, OR UP… Hello and welcome to Just Answer. I am sorry to hear about your problems with this vehicle. If you like, we can try to do a few tests to isolate the cause of the problem. Your truck uses a device called an IAC valve to control idle speed.

Why does my car stall when I put the accelerator down?

When an idle control valve becomes contaminated or stuck, it may lead to an unsteady and rough idle. The car will stall if the valve is too clogged or when it finally fails. If, while holding the accelerator pedal down, a small amount of pressure keeps the car running at a stop, the idle control valve may require attention.

What to do if your Jeep stall at idle?

Disconnect the battery and leave it that way for a couple of hours. Restart the engine and see how the idle is. It may stall the first time. If it does, turn the key off for 10 seconds and retry. It should reset. If it does not, you are going to have to take it to a shop that has a scantool that will perform an IAC RESET.

Why does my Jeep Wrangler splutter when I accelerate?

If your Jeep seems to run normally under low RPM,s however when you accelerate to pick up speed the vehicle starts spluttering and feels very under-powered, this section is for you. Before you run out and purchase a new fuel pump or throttle body, which can be quite pricy, start off by cleaning the throttle body thoroughly.

Why does my Jeep Wrangler shut down while driving?

If your Jeep Wrangler is shutting down while driving, it’s a real safety hazard. Vehicles are a lot harder to control without power brakes or steering. Directly below is a list of the most common reasons why your Wrangler would randomly die while driving. It may help you in your diagnosis.

Why does my Jeep clutch not turn over?

If it stays on then you have a problem in the theft system or the… Jeep will crank but won’t turn over. Fuel pump running constantly and the ASD replay buzzing and alarm system won’t shut off. Hi there, thanks for your question.

What are the symptoms of a bad clutch switch?

$0.00 1 Vehicle does not start One of the first symptoms commonly associated with a bad or failing clutch master safety switch is a vehicle that does not start. 2 Starts while in gear Another symptom of a problem with the clutch safety switch is a vehicle that starts while the transmission is in gear. 3 Check Engine Light comes on

Why does my Jeep Wrangler shudder when I put it in gear?

I have a 2012 Jeep Wrangler Unlimited auto trans, around 80,000 miles. This started a few months ago. When I start it cold, like after sitting overnight, it starts fine, sounds fine. But when I put it in gear (D or R), it either shudders and RPM’s drop and feels like it’s going to stall, or it actually stalls.

What to do if your engine stalls after warm-up?

Re-installed started it back up and it seemed to run normally, but then stalled. Also, removed the coil rail and tested it with an OHM meter and it checked out. I ran the OHM meter over every switch and sensor I could find and have pulled and checked every fuse. Everything is in spec.I got a fuel pressure gauge hooked up.

What causes Ford Focus to stall in cold weather?

According to Ford TSB 04-21-13, a cold stalling problem with 2003-2004 Ford Focus models with 2.0L SPI engine during extremely cold weather can be caused by a faulty PCV valve that sticks open, allowing too much air to be sucked into the intake manifold.

What to do if your car wont start after refueling?

This is only a way to get it started after refueling until you get the purge valve replaced to fix the problem. If the problem persists, have a mechanic, such as one from YourMechanic, diagnose your car’s hard starting problem to verify what needs to be done.

What causes a car to have trouble starting?

It can sometimes be a challenge to get a car to… Hello – there are several possible cooling system problems which could cause this behavior, low coolant level, a thermostat that is failing – not holding constant temperature, a cooling system that has degraded, and cannot keep up with short-term “extra… This is a simple mechanical failure.

Why does my Jeep Cherokee keep stalling?

While certainly frustrating, these stalls can also have serious consequences. Here is why your Jeep Cherokee keeps stalling: Many stalling problems can be attributed to the PCM or crankshaft sensor and there are steps you can take to fix these issues yourself or at the very least point your mechanic in the right direction

Why does my Jeep start and then turn off?

When normally starting the Jeep, if you stop at turning the key to on, you should see the red Security Key light go out. Sometimes it is only one key. If both key react that way, it is most likely the module (separate from the remote lock/unlock module) which I believe is mounted to the steering column under the dash.

How to fix idle and stalling on a Jeep Wrangler?

1. Remove wire clip from throttle linkage side of carburetor (see picture) 2. Remove 1/4″ bolt from opposite side of choke rod (see second picture) and remove little flange thing the bolt held on (you may need to tap it with a screw driver, or something similar) 3.

What to do if your Jeep Wrangler won’t start?

Troubleshooting Jeep TJ Wrangler! Won’t Start but Problem Found – Project 2004 If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.

Why does my Jeep Wrangler have bad valve springs?

The bad Valve springs, for example are only related to the older model TJ’s, which were synonymous for this for problem. Various codes should appear, some of which you can safely ignore, as well as a CHECK ENGINE light.

Where was the 1999 Jeep Wrangler last serviced?

Purchased on 07/09/99 and owned in CA until 05/07/21. Driven an estimated 6,759 miles/year. Last serviced at 147,181 miles in San Leandro, CA on 05/01/21 • V… No accident or damage reported to CARFAX.

Why does my Jeep Wrangler engine not start?

ALSO WHEN I DRIVE THE JEEP JOLTS RANDOMLY WITH THE RPM DROPPING AT RANDOM TIMES. NOW MY JEEP Won’t START. U CAN HEAR IT CRANK BUT NOT TURN OVER. I HAVE A APPOINTMENT THIS FOLLOWING FRIDAY AT THE DEALERSHIP BECAUSE OF AIRBAG RECALL BY JEEP CORPORATE.

Are there any problems with the Jeep Cherokee?

Although it is one of the most recognizable models on the SUV landscape, the Jeep Cherokee has been plagued through the years by driver complaints about chronic stalling. There are countless instances of Jeep Cherokees stalling while traveling at low speeds or high speeds, driving straight or losing power in the midst of a turn.

When was the last time my Jeep shut off while driving?

The last time the Jeep shut off while driving (June 21st, 2018) we lost total control of the vehicle and wound up crashing into another vehicle and totaling our Jeep and doing significant damage to the other vehicle. Called Jeep up immediately after getting copies of all service records from when I brought the vehicle in with the issue.

Why does my Jeep Compass stall while driving?

Some owners have reported that the vehicles are shutting off while driving at highway speeds. Other Compass owners have experienced stalling immediately after the vehicle restarts at stop lights or stop signs.

Is the axle going to fall off a jeep?

“It can definitely be a scary thing, death wobble, with the Jeep violently bashing and everything inside rattling, especially on the highway. It almost felt like the axle was going to fall off.” In reality, the axle won’t fall off. Nor will the wheels come apart.

Why does my car stall immediately after starting?

Rarely I have to rev at stops or the idle drops too low and stalls. If I punch the gas very quickly it revs and drops quickly and then stalls. Starting has a success rate of about 50% without revving. If it stalls, I must rev the engine to start.

Can a bad alternator cause a Jeep Wrangler to stall?

As described above, a bad alternator will drain your Wrangler’s battery fast. When the battery gets so dead it will no longer be able to power your Wrangler’s ignition system. As the ignition system is no longer able to produce a full powered spark, the engine will begin to sputter and stall.

Are there any problems with the Jeep Wrangler?

To state the obvious, this is a very dangerous condition, particularly as our family has three children under the age of six. To date, larry miller Jeep has been unable to diagnose the issue as no error codes appear. . Read more… See all problems of the 2012 Jeep Wrangler .

What happens when you shut off the engine in a Jeep Wrangler?

Vehicle shuts down completely. The interior still has power but the power steering and engine stops. It restarts but act like it is not getting any fuel. It runs fine after it is cranked until the next time it happens. It is very dangerous as. See all problems of the 2015 Jeep Wrangler .

Why does my Jeep not start when it’s warm?

If its a starter issue it WONT crank, when some part of the starter system is failing or failed it wont turn over. Very different from cranking and not starting. If your getting clicking, you may have a weak battery, poor connection or dying starter (likely one of the prior).

Why does my car stall at 60 mph?

When vehilcle gets to 60mph or more it sputters / (small backfires) in the exhaust along with increased valve clatter, heating up. It sounds like the engine is getting starved for fuel above 60 mph. I would first try and test for any codes in computer and then if no codes then check fuel pressure to see if it is normal. If…

Navigation