Why does my Honda CRV Rattle at start up?
At cold start-up, the engine rattles loudly for about two seconds. The possible cause could be the variable valve timing control (VTC) actuator is defective. Replace the VTC actuator.
What to do if your Honda CRV makes a ticking sound?
If the heat shield is loose, you’ll need to take your CR-V into a good exhaust shop and have it welded back into place. The good news is that a loose heat shield is never going to leave you broken down on the side of the road. If your exhaust system is leaking, it will often make an aggressive ticking sound.
What to do when Honda Accord Rattles at start up?
Place the camshaft/VTC actuator assembly on a clean, padded workbench. 20. Secure the timing chain to the A/C compressor hose using a wire or zip tie to keep it from falling into the front cover. 21. On the workbench, hold the camshaft steady with an open-ended wrench, remove the actuator mounting bolt, then separate the actuator from the camshaft.
Is the Honda Accord liable for grinding sound?
Honda is totally liable for this. Sometimes when starting the car, there is a grinding sound that lasts for 1-2 seconds and then stops. Search CarComplaints.com for these popular complaint phrases… Let me start by saying we have a 2012 CRV EX-L and a 2012 Accord Ex-L. Bought the first Accord in 2003 then 2006 Accord then the 2012’s.
What does a Honda CRV cold start noise mean?
If you search You Tube, for “2012 Honda CRV, Cold start noise” you will hear exactly what noise I’m referring to. Through research, I’ve found that this problem affects all recent model 2.4L engines, CRV’s and Accords. It’s a metal on metal sound, like a grinding noise, or to me sounds like the timing chain is hitting the valve cover.
What to do when Honda CRV Rattles at start up?
Once fitted, with the actuator facing you, carefully rotate it counterclockwise until it engages the camshaft locator pin. When installed and rotated this way the VTC actuator will not lock. Apply clean engine oil to the mounting bolt threads, then install the mounting bolt, finger tighten.
Why does my Honda Accord rattle when I start it up?
The possible cause could be the variable valve timing control (VTC) actuator is defective. Replace the VTC actuator. This procedure does not require the complete removal of the cam chain and associated parts, so repair time is shorter. At cold start-up, the engine rattles loudly for about two seconds.
If the heat shield is loose, you’ll need to take your CR-V into a good exhaust shop and have it welded back into place. The good news is that a loose heat shield is never going to leave you broken down on the side of the road. If your exhaust system is leaking, it will often make an aggressive ticking sound.
At cold start-up, the engine rattles loudly for about two seconds. The possible cause could be the variable valve timing control (VTC) actuator is defective. Replace the VTC actuator.
Why does my Honda CRV no longer start?
If the Honda CR-V no longer starts and you don’t notice any noise or lights on the dashboard when starting, there may be a problem with the electrical system. The same signs can apply to a deeply discharged battery, so this should be ruled out first. If the electrical system malfunctions, a blown main fuse can prevent electricity from flowing.
What kind of noise does a Honda CRV make?
Currently it make the HORRIBLE LOUD noise at every start up. So every time I start up my car I have people tell me I need to get that check out. The noise is loud enough to hear up to 8 lanes across in a parking lots.
How does a Honda CRV battery come to life?
The battery can be brought to life by starting aid, in which the battery receives a current pulse from the starter battery of another vehicle, which is enough to start the engine. Or by charging with a battery charger, which on the other hand takes a few hours. It is faster with a start booster.
Can a stalling engine be intermittent driveability?
Intermittent driveability problems of any kind are always a challenge to diagnose. When a customer brings you a vehicle and complains of a stalling problem, you may not have much to go on other than their description of what’s happening and when it happens.
Why does my car stumble when I open the throttle?
If there are no misfire codes, a common cause of acceleration stumble is a bad throttle position sensor (TPS). The TPS tells the computer how far the throttle is open. The computer uses this information to determine how much fuel is needed to maintain the correct air/fuel mixture and when extra fuel is needed if the throttle suddenly opens wide.
What happens when the PCV valve fails on a Honda?
Usually if the PCV valve fails in this manner, you’ll experience a ‘high’ or ‘hunting’ idle. An easy way to find one of these faulty PCV valves is to pinch off the supply line to the PCV valve with a pair of pliers while the engine is at idle.
Are there any problems with my 2005 Honda CRV?
2005 CRV. Intermittent starting problems. Sometimes has difficulty turning over. Sometimes pops right off. Sometimes 2005 CRV. Intermittent starting problems. Sometimes has I have a 98 Honda CR-V that had a bad starter.
Why does my 2005 Honda Element not start?
2005 Honda Element: Usually it starts, but sometimes it doesnt start. My 2005 Honda Element often makes a grating noise when you turn the key to start it. Usually it starts, but sometimes it doesn’t start. If I wait a … read more Service Center Owner / Tec…