Why does my DAB radio have no sound?
Try switching your radio on and off. If you still have a problem use the ‘autotune’ function to re-tune. If this does not work, a full re-scan might be needed. Check your radio manual for specific instructions on doing a full re-scan.
Why do I have no sound on my phone?
How to fix sound issues on an Android phone. Restart your phone: A simple reboot can be the solution for many problems. Clean the headphone jack: If you’re having this issue only when the headphones are plugged in, try cleaning the jack. Also, try another pair of headphones, since it could be them causing the problem.
How do I reset my DAB radio?
Press and hold the Select or the Info button on your radio until the display shows System Reset or Factory Reset. Press and hold the Menu button for three seconds. Push the Tune button within 3 seconds to confirm the Reset. Press the Menu button and select System Reset or Factory Reset.
Why is there no sound on my Roberts radio?
Do you have a Roberts Revival R250 or R550 radio with no sound? It’s a common problem with these radios most likely due to plugging in the wrong power adapter or replacing the battery with it switched on and accidentally reversing the connections.
Is there a problem with DAB radio?
DAB radio outages are rare and usually don’t last for very long (a few hours at most). Large-scale outages that affect all stations are especially rare. In fact, we couldn’t find any news reports about DAB ever being completely down in the UK since the technology was launched.
Why is DAB so bad?
Much worse – because it’s an older CODEC. Internet radio feeds will be using AAC or other more efficient CODECs. The only station which broadcasts on DAB with decent quality is Radio 3, and even that is -just- OK. Generally, assuming you’ve got internet coverage, you’re better off streaming than using DAB.
Can you manually tune a DAB radio?
2) Rotate the VOLUME dial to Manual Tune and then press VOLUME dial to enter Manual Tune. 3) Rotate the VOLUME dial to the frequency you want to listen to and then press VOLUME dial to confirm. The radio will search the stations at this specific frequency.
How do I reset my Roberts radio?
Switch on your radio – as soon as the screen shows “Roberts DAB digital radio” press and hold in the Tuning control until the display shows “System Reset”. 3. A full reset will be performed. All presets and station lists will be erased.
Can a Roberts radio be repaired?
Repairs are usually completed within 10 working days from when the radio is received at our repair centre.
Why can’ti get all DAB stations?
This is due to the stations moving to a different network of digital radio transmitters. Your radio might not have found a strong enough signal to store them in the station list.
Why is there no sound on my digital radio?
Whilst playing my digital radio on full volume, the sound suddenly stopped. Everything else still works: all lights, LCD display, channel selection, tuning, just absolutely no sound. When it happened, the sound was slightly distorted and then just disappeared instantly and has stayed away.
Is the clock on the radio still working?
The music still plays, but I cannot see the The radio/clock display is not working, but the radio is… The light illuminaing the radio and NAV system will not light up. Radio works I just don’t know what station I’m playing etc.
When did the sound on my Radio stop?
When it happened, the sound was slightly distorted and then just disappeared instantly and has stayed away. The radio is meant to be of reasonable quality and is only about 18 months old. Any pointers would be greatly received.
Why is my car radio display not working?
Your car radio may have damaged connectors that are not able to transmit power and information to the display LED, and it is not able to work. There can be several possible reasons that can cause the connectors of the LED to stop giving power. The main reason for the damaged connectors can be a loose connection of wires of the connectors.